[PATCH V4 23/26] video: fbdev: nvidia: deprecate pci_get_bus_and_slot()
Sinan Kaya
okaya at codeaurora.org
Tue Dec 19 05:37:59 UTC 2017
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
struct nvidia_par has a pointer to struct pci_dev. Use the pci_dev
member to extract the domain information and pass it to
pci_get_domain_bus_and_slot() function.
Signed-off-by: Sinan Kaya <okaya at codeaurora.org>
---
drivers/video/fbdev/nvidia/nv_hw.c | 11 ++++++-----
drivers/video/fbdev/nvidia/nv_setup.c | 3 ++-
2 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/video/fbdev/nvidia/nv_hw.c b/drivers/video/fbdev/nvidia/nv_hw.c
index 81c80ac..8335da4 100644
--- a/drivers/video/fbdev/nvidia/nv_hw.c
+++ b/drivers/video/fbdev/nvidia/nv_hw.c
@@ -683,10 +683,11 @@ static void nForceUpdateArbitrationSettings(unsigned VClk,
nv10_sim_state sim_data;
unsigned int M, N, P, pll, MClk, NVClk, memctrl;
struct pci_dev *dev;
+ int domain = pci_domain_nr(par->pci_dev->bus);
if ((par->Chipset & 0x0FF0) == 0x01A0) {
unsigned int uMClkPostDiv;
- dev = pci_get_bus_and_slot(0, 3);
+ dev = pci_get_domain_bus_and_slot(domain, 0, 3);
pci_read_config_dword(dev, 0x6C, &uMClkPostDiv);
uMClkPostDiv = (uMClkPostDiv >> 8) & 0xf;
@@ -694,7 +695,7 @@ static void nForceUpdateArbitrationSettings(unsigned VClk,
uMClkPostDiv = 4;
MClk = 400000 / uMClkPostDiv;
} else {
- dev = pci_get_bus_and_slot(0, 5);
+ dev = pci_get_domain_bus_and_slot(domain, 0, 5);
pci_read_config_dword(dev, 0x4c, &MClk);
MClk /= 1000;
}
@@ -707,13 +708,13 @@ static void nForceUpdateArbitrationSettings(unsigned VClk,
sim_data.pix_bpp = (char)pixelDepth;
sim_data.enable_video = 0;
sim_data.enable_mp = 0;
- dev = pci_get_bus_and_slot(0, 1);
+ dev = pci_get_domain_bus_and_slot(domain, 0, 1);
pci_read_config_dword(dev, 0x7C, &sim_data.memory_type);
pci_dev_put(dev);
sim_data.memory_type = (sim_data.memory_type >> 12) & 1;
sim_data.memory_width = 64;
- dev = pci_get_bus_and_slot(0, 3);
+ dev = pci_get_domain_bus_and_slot(domain, 0, 3);
pci_read_config_dword(dev, 0, &memctrl);
pci_dev_put(dev);
memctrl >>= 16;
@@ -721,7 +722,7 @@ static void nForceUpdateArbitrationSettings(unsigned VClk,
if ((memctrl == 0x1A9) || (memctrl == 0x1AB) || (memctrl == 0x1ED)) {
u32 dimm[3];
- dev = pci_get_bus_and_slot(0, 2);
+ dev = pci_get_domain_bus_and_slot(domain, 0, 2);
pci_read_config_dword(dev, 0x40, &dimm[0]);
dimm[0] = (dimm[0] >> 8) & 0x4f;
pci_read_config_dword(dev, 0x44, &dimm[1]);
diff --git a/drivers/video/fbdev/nvidia/nv_setup.c b/drivers/video/fbdev/nvidia/nv_setup.c
index 2f2e162..b17acd2 100644
--- a/drivers/video/fbdev/nvidia/nv_setup.c
+++ b/drivers/video/fbdev/nvidia/nv_setup.c
@@ -264,7 +264,8 @@ static void nv10GetConfig(struct nvidia_par *par)
}
#endif
- dev = pci_get_bus_and_slot(0, 1);
+ dev = pci_get_domain_bus_and_slot(pci_domain_nr(par->pci_dev->bus),
+ 0, 1);
if ((par->Chipset & 0xffff) == 0x01a0) {
u32 amt;
--
1.9.1
More information about the dri-devel
mailing list