[PATCH] drm: Add DPCD definitions for DP 1.4 FEC feature

Anusha Srivatsa anusha.srivatsa at intel.com
Fri Dec 22 22:02:50 UTC 2017


Forward Error Correction is supported on DP 1.4.
This patch adds corresponding DPCD register definitions.

v2: Add dri-devel mailing list to the CC list(Jani)

v3: Change names, add missing masks (Manasi)

Cc: dri-devel at lists.freedesktop.org
Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: Manasi Navare <manasi.d.navare at intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
---
 include/drm/drm_dp_helper.h | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index da58a42..4f75034 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -284,6 +284,36 @@
 # define DP_DSC_BITS_PER_PIXEL_1_2          0x3
 # define DP_DSC_BITS_PER_PIXEL_1            0x4
 
+/* DP Forward error Correction Registers */
+#define DP_FEC_CAPABILITY		    0x090
+# define DP_FEC_CAPABLE			    (1 << 0)
+# define DP_FEC_UNCORR_BLK_ERROR_COUNT_CAP  (1 << 1)
+# define DP_FEC_CORR_BLK_ERROR_COUNT_CAP    (1 << 2)
+# define DP_FEC_BIT_ERROR_COUNT_CAP	    (1 << 3)
+
+#define DP_FEC_CONFIGURATION		    0x120
+# define DP_FEC_READY			    (1 << 0)
+# define DP_FEC_ERR_COUNT_DIS		    (0 << 1)
+# define DP_FEC_UNCORR_BLK_ERROR_COUNT	    (1 << 1)
+# define DP_FEC_CORR_BLK_ERROR_COUNT	    (2 << 1)
+# define DP_FEC_BIT_ERROR_COUNT		    (3 << 1)
+# define DP_FEC_ERR_COUNT_SEL_MASK	    (0xFF)
+# define DP_FEC_LANE_0_SELECT		    (0 << 4)
+# define DP_FEC_LANE_1_SELECT		    (1 << 4)
+# define DP_FEC_LANE_2_SELECT		    (2 << 4)
+# define DP_FEC_LANE_3_SELECT		    (3 << 4)
+
+#define DP_FEC_STATUS			    0x280
+# define DP_FEC_DECODE_EN_DETECTED	    (1 << 0)
+# define DP_FEC_DECODE_DIS_DETECTED	    (1 << 1)
+
+#define DP_FEC_ERROR_COUNT_LSB		    0x0281
+
+#define DP_FEC_ERROR_COUNT_MSB		    0x0282
+# define DP_FEC_ERROR_COUNT_MASK	    0x7F
+# define DP_FEC_ERR_COUNT_SHIFT		    8
+# define DP_FEC_ERR_COUNT_VALID		    (1 << 7)
+
 #define DP_PSR_SUPPORT                      0x070   /* XXX 1.2? */
 # define DP_PSR_IS_SUPPORTED                1
 # define DP_PSR2_IS_SUPPORTED		    2	    /* eDP 1.4 */
-- 
2.7.4



More information about the dri-devel mailing list