[PATCH v3 17/25] drm/bridge/sii8620: split EDID read and write code
Andrzej Hajda
a.hajda at samsung.com
Wed Feb 1 07:47:44 UTC 2017
MHL3 requires that after reading EDID from the sink source should ask
peer for features. To make both protocols happy the patch splits the code
accordingly.
Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
---
drivers/gpu/drm/bridge/sil-sii8620.c | 31 +++++++++++++++++++++++++++----
1 file changed, 27 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
index 6ef1a4d..d0e6dc3 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.c
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -482,6 +482,13 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret)
dev_info(dev, "detected sink(type: %s): %s\n",
sink_str[ctx->sink_type], sink_name);
+}
+
+static void sii8620_edid_read(struct sii8620 *ctx, int ret)
+{
+ if (ret < 0)
+ return;
+
sii8620_set_upstream_edid(ctx);
sii8620_enable_hpd(ctx);
}
@@ -787,12 +794,12 @@ static void sii8620_fetch_edid(struct sii8620 *ctx)
edid = new_edid;
}
}
-
- if (fetched + FETCH_SIZE == edid_len)
- sii8620_write(ctx, REG_INTR3, int3);
}
- sii8620_write(ctx, REG_LM_DDC, lm_ddc);
+ sii8620_write_seq(ctx,
+ REG_INTR3_MASK, BIT_DDC_CMD_DONE,
+ REG_LM_DDC, lm_ddc
+ );
end:
kfree(ctx->edid);
@@ -1706,6 +1713,21 @@ static void sii8620_irq_block(struct sii8620 *ctx)
sii8620_write(ctx, REG_EMSCINTR, stat);
}
+static void sii8620_irq_ddc(struct sii8620 *ctx)
+{
+ u8 stat = sii8620_readb(ctx, REG_INTR3);
+
+ if (stat & BIT_DDC_CMD_DONE) {
+ sii8620_write(ctx, REG_INTR3_MASK, 0);
+ if (sii8620_is_mhl3(ctx))
+ sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE),
+ MHL_INT_RC_FEAT_REQ);
+ else
+ sii8620_edid_read(ctx, 0);
+ }
+ sii8620_write(ctx, REG_INTR3, stat);
+}
+
/* endian agnostic, non-volatile version of test_bit */
static bool sii8620_test_bit(unsigned int nr, const u8 *addr)
{
@@ -1726,6 +1748,7 @@ static irqreturn_t sii8620_irq_thread(int irq, void *data)
{ BIT_FAST_INTR_STAT_MERR, sii8620_irq_merr },
{ BIT_FAST_INTR_STAT_BLOCK, sii8620_irq_block },
{ BIT_FAST_INTR_STAT_EDID, sii8620_irq_edid },
+ { BIT_FAST_INTR_STAT_DDC, sii8620_irq_ddc },
{ BIT_FAST_INTR_STAT_SCDT, sii8620_irq_scdt },
{ BIT_FAST_INTR_STAT_INFR, sii8620_irq_infr },
};
--
2.7.4
More information about the dri-devel
mailing list