[PATCH 1/3] drm/sti: use atomic_helper for commit

Vincent ABRIOU vincent.abriou at st.com
Wed Feb 1 14:43:30 UTC 2017


Acked-by: Vincent Abriou <vincent.abriou at st.com>

On 01/12/2017 05:27 PM, Fabien Dessenne wrote:
> Since nonblocking atomic commits are now supported, the driver can
> now use drm_atomic_helper_commit().
>
> Signed-off-by: Fabien Dessenne <fabien.dessenne at st.com>
> ---
>  drivers/gpu/drm/sti/sti_drv.c | 83 +------------------------------------------
>  drivers/gpu/drm/sti/sti_drv.h |  6 ----
>  2 files changed, 1 insertion(+), 88 deletions(-)
>
> diff --git a/drivers/gpu/drm/sti/sti_drv.c b/drivers/gpu/drm/sti/sti_drv.c
> index ff71e25..9a9b9a2 100644
> --- a/drivers/gpu/drm/sti/sti_drv.c
> +++ b/drivers/gpu/drm/sti/sti_drv.c
> @@ -150,52 +150,6 @@ static void sti_drm_dbg_cleanup(struct drm_minor *minor)
>  				 1, minor);
>  }
>
> -static void sti_atomic_schedule(struct sti_private *private,
> -				struct drm_atomic_state *state)
> -{
> -	private->commit.state = state;
> -	schedule_work(&private->commit.work);
> -}
> -
> -static void sti_atomic_complete(struct sti_private *private,
> -				struct drm_atomic_state *state)
> -{
> -	struct drm_device *drm = private->drm_dev;
> -
> -	/*
> -	 * Everything below can be run asynchronously without the need to grab
> -	 * any modeset locks at all under one condition: It must be guaranteed
> -	 * that the asynchronous work has either been cancelled (if the driver
> -	 * supports it, which at least requires that the framebuffers get
> -	 * cleaned up with drm_atomic_helper_cleanup_planes()) or completed
> -	 * before the new state gets committed on the software side with
> -	 * drm_atomic_helper_swap_state().
> -	 *
> -	 * This scheme allows new atomic state updates to be prepared and
> -	 * checked in parallel to the asynchronous completion of the previous
> -	 * update. Which is important since compositors need to figure out the
> -	 * composition of the next frame right after having submitted the
> -	 * current layout.
> -	 */
> -
> -	drm_atomic_helper_commit_modeset_disables(drm, state);
> -	drm_atomic_helper_commit_planes(drm, state, 0);
> -	drm_atomic_helper_commit_modeset_enables(drm, state);
> -
> -	drm_atomic_helper_wait_for_vblanks(drm, state);
> -
> -	drm_atomic_helper_cleanup_planes(drm, state);
> -	drm_atomic_state_put(state);
> -}
> -
> -static void sti_atomic_work(struct work_struct *work)
> -{
> -	struct sti_private *private = container_of(work,
> -			struct sti_private, commit.work);
> -
> -	sti_atomic_complete(private, private->commit.state);
> -}
> -
>  static int sti_atomic_check(struct drm_device *dev,
>  			    struct drm_atomic_state *state)
>  {
> @@ -216,38 +170,6 @@ static int sti_atomic_check(struct drm_device *dev,
>  	return ret;
>  }
>
> -static int sti_atomic_commit(struct drm_device *drm,
> -			     struct drm_atomic_state *state, bool nonblock)
> -{
> -	struct sti_private *private = drm->dev_private;
> -	int err;
> -
> -	err = drm_atomic_helper_prepare_planes(drm, state);
> -	if (err)
> -		return err;
> -
> -	/* serialize outstanding nonblocking commits */
> -	mutex_lock(&private->commit.lock);
> -	flush_work(&private->commit.work);
> -
> -	/*
> -	 * This is the point of no return - everything below never fails except
> -	 * when the hw goes bonghits. Which means we can commit the new state on
> -	 * the software side now.
> -	 */
> -
> -	drm_atomic_helper_swap_state(state, true);
> -
> -	drm_atomic_state_get(state);
> -	if (nonblock)
> -		sti_atomic_schedule(private, state);
> -	else
> -		sti_atomic_complete(private, state);
> -
> -	mutex_unlock(&private->commit.lock);
> -	return 0;
> -}
> -
>  static void sti_output_poll_changed(struct drm_device *ddev)
>  {
>  	struct sti_private *private = ddev->dev_private;
> @@ -271,7 +193,7 @@ static const struct drm_mode_config_funcs sti_mode_config_funcs = {
>  	.fb_create = drm_fb_cma_create,
>  	.output_poll_changed = sti_output_poll_changed,
>  	.atomic_check = sti_atomic_check,
> -	.atomic_commit = sti_atomic_commit,
> +	.atomic_commit = drm_atomic_helper_commit,
>  };
>
>  static void sti_mode_config_init(struct drm_device *dev)
> @@ -352,9 +274,6 @@ static int sti_init(struct drm_device *ddev)
>  	dev_set_drvdata(ddev->dev, ddev);
>  	private->drm_dev = ddev;
>
> -	mutex_init(&private->commit.lock);
> -	INIT_WORK(&private->commit.work, sti_atomic_work);
> -
>  	drm_mode_config_init(ddev);
>
>  	sti_mode_config_init(ddev);
> diff --git a/drivers/gpu/drm/sti/sti_drv.h b/drivers/gpu/drm/sti/sti_drv.h
> index 78ebe5e..f9276cd 100644
> --- a/drivers/gpu/drm/sti/sti_drv.h
> +++ b/drivers/gpu/drm/sti/sti_drv.h
> @@ -25,12 +25,6 @@ struct sti_private {
>  	struct drm_property *plane_zorder_property;
>  	struct drm_device *drm_dev;
>  	struct drm_fbdev_cma *fbdev;
> -
> -	struct {
> -		struct drm_atomic_state *state;
> -		struct work_struct work;
> -		struct mutex lock;
> -	} commit;
>  };
>
>  extern struct platform_driver sti_tvout_driver;
>


More information about the dri-devel mailing list