[PATCH v4] drm/imx: ipuv3-plane: use drm_plane_helper_check_state, clipped coordinates
Philipp Zabel
p.zabel at pengutronix.de
Fri Feb 3 09:31:39 UTC 2017
Use drm_plane_helper_check_state to clip raw user coordinates to crtc
bounds. This checks for full plane coverage and scaling already, so
we can drop some custom checks. Use the clipped coordinates everywhere.
Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
Changes since v3:
- Disallow target frames that start offscreen (state->crtc_x/y < 0), to avoid
confusing userspace: due to the necessary line start address alignment, we
could only support very specific negative values for crtc_x/y, depending on
the pixel format.
---
drivers/gpu/drm/imx/ipuv3-plane.c | 80 +++++++++++++++++++--------------------
1 file changed, 40 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c
index e74a0ad52950c..5cefa70bd8d17 100644
--- a/drivers/gpu/drm/imx/ipuv3-plane.c
+++ b/drivers/gpu/drm/imx/ipuv3-plane.c
@@ -70,8 +70,8 @@ drm_plane_state_to_eba(struct drm_plane_state *state)
{
struct drm_framebuffer *fb = state->fb;
struct drm_gem_cma_object *cma_obj;
- int x = state->src_x >> 16;
- int y = state->src_y >> 16;
+ int x = state->src.x1 >> 16;
+ int y = state->src.y1 >> 16;
cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
BUG_ON(!cma_obj);
@@ -86,8 +86,8 @@ drm_plane_state_to_ubo(struct drm_plane_state *state)
struct drm_framebuffer *fb = state->fb;
struct drm_gem_cma_object *cma_obj;
unsigned long eba = drm_plane_state_to_eba(state);
- int x = state->src_x >> 16;
- int y = state->src_y >> 16;
+ int x = state->src.x1 >> 16;
+ int y = state->src.y1 >> 16;
cma_obj = drm_fb_cma_get_gem_obj(fb, 1);
BUG_ON(!cma_obj);
@@ -105,8 +105,8 @@ drm_plane_state_to_vbo(struct drm_plane_state *state)
struct drm_framebuffer *fb = state->fb;
struct drm_gem_cma_object *cma_obj;
unsigned long eba = drm_plane_state_to_eba(state);
- int x = state->src_x >> 16;
- int y = state->src_y >> 16;
+ int x = state->src.x1 >> 16;
+ int y = state->src.y1 >> 16;
cma_obj = drm_fb_cma_get_gem_obj(fb, 2);
BUG_ON(!cma_obj);
@@ -218,7 +218,10 @@ static int ipu_plane_atomic_check(struct drm_plane *plane,
struct drm_framebuffer *fb = state->fb;
struct drm_framebuffer *old_fb = old_state->fb;
unsigned long eba, ubo, vbo, old_ubo, old_vbo;
+ bool can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY);
+ struct drm_rect clip;
int hsub, vsub;
+ int ret;
/* Ok to disable */
if (!fb)
@@ -232,44 +235,39 @@ static int ipu_plane_atomic_check(struct drm_plane *plane,
if (WARN_ON(!crtc_state))
return -EINVAL;
+ clip.x1 = 0;
+ clip.y1 = 0;
+ clip.x2 = crtc_state->adjusted_mode.hdisplay;
+ clip.y2 = crtc_state->adjusted_mode.vdisplay;
+ ret = drm_plane_helper_check_state(state, &clip,
+ DRM_PLANE_HELPER_NO_SCALING,
+ DRM_PLANE_HELPER_NO_SCALING,
+ can_position, true);
+ if (ret)
+ return ret;
+
/* CRTC should be enabled */
if (!crtc_state->enable)
return -EINVAL;
- /* no scaling */
- if (state->src_w >> 16 != state->crtc_w ||
- state->src_h >> 16 != state->crtc_h)
+ /* Target frame must not start off-screen */
+ if (state->crtc_x < 0 || state->crtc_y < 0)
return -EINVAL;
switch (plane->type) {
case DRM_PLANE_TYPE_PRIMARY:
- /* full plane doesn't support partial off screen */
- if (state->crtc_x || state->crtc_y ||
- state->crtc_w != crtc_state->adjusted_mode.hdisplay ||
- state->crtc_h != crtc_state->adjusted_mode.vdisplay)
- return -EINVAL;
-
/* full plane minimum width is 13 pixels */
- if (state->crtc_w < 13)
+ if (drm_rect_width(&state->dst) < 13)
return -EINVAL;
break;
case DRM_PLANE_TYPE_OVERLAY:
- if (state->crtc_x < 0 || state->crtc_y < 0)
- return -EINVAL;
-
- if (state->crtc_x + state->crtc_w >
- crtc_state->adjusted_mode.hdisplay)
- return -EINVAL;
- if (state->crtc_y + state->crtc_h >
- crtc_state->adjusted_mode.vdisplay)
- return -EINVAL;
break;
default:
- dev_warn(dev, "Unsupported plane type\n");
+ dev_warn(dev, "Unsupported plane type %d\n", plane->type);
return -EINVAL;
}
- if (state->crtc_h < 2)
+ if (drm_rect_height(&state->dst) < 2)
return -EINVAL;
/*
@@ -279,9 +277,10 @@ static int ipu_plane_atomic_check(struct drm_plane *plane,
* callback. The planes will be reenabled in plane's ->atomic_update
* callback.
*/
- if (old_fb && (state->src_w != old_state->src_w ||
- state->src_h != old_state->src_h ||
- fb->pixel_format != old_fb->pixel_format))
+ if (old_fb &&
+ (drm_rect_width(&state->dst) != drm_rect_width(&old_state->dst) ||
+ drm_rect_height(&state->dst) != drm_rect_height(&old_state->dst) ||
+ fb->pixel_format != old_fb->pixel_format))
crtc_state->mode_changed = true;
eba = drm_plane_state_to_eba(state);
@@ -350,8 +349,8 @@ static int ipu_plane_atomic_check(struct drm_plane *plane,
*/
hsub = drm_format_horz_chroma_subsampling(fb->pixel_format);
vsub = drm_format_vert_chroma_subsampling(fb->pixel_format);
- if (((state->src_x >> 16) & (hsub - 1)) ||
- ((state->src_y >> 16) & (vsub - 1)))
+ if (((state->src.x1 >> 16) & (hsub - 1)) ||
+ ((state->src.y1 >> 16) & (vsub - 1)))
return -EINVAL;
}
@@ -395,8 +394,8 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
ics = ipu_drm_fourcc_to_colorspace(state->fb->pixel_format);
ipu_dp_setup_channel(ipu_plane->dp, ics,
IPUV3_COLORSPACE_UNKNOWN);
- ipu_dp_set_window_pos(ipu_plane->dp, state->crtc_x,
- state->crtc_y);
+ ipu_dp_set_window_pos(ipu_plane->dp,
+ state->dst.x1, state->dst.y1);
/* Enable local alpha on partial plane */
switch (state->fb->pixel_format) {
case DRM_FORMAT_ARGB1555:
@@ -416,11 +415,12 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
}
}
- ipu_dmfc_config_wait4eot(ipu_plane->dmfc, state->crtc_w);
+ ipu_dmfc_config_wait4eot(ipu_plane->dmfc, drm_rect_width(&state->dst));
ipu_cpmem_zero(ipu_plane->ipu_ch);
- ipu_cpmem_set_resolution(ipu_plane->ipu_ch, state->src_w >> 16,
- state->src_h >> 16);
+ ipu_cpmem_set_resolution(ipu_plane->ipu_ch,
+ drm_rect_width(&state->src) >> 16,
+ drm_rect_height(&state->src) >> 16);
ipu_cpmem_set_fmt(ipu_plane->ipu_ch, state->fb->pixel_format);
ipu_cpmem_set_high_priority(ipu_plane->ipu_ch);
ipu_idmac_set_double_buffer(ipu_plane->ipu_ch, 1);
@@ -444,7 +444,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
dev_dbg(ipu_plane->base.dev->dev,
"phy = %lu %lu %lu, x = %d, y = %d", eba, ubo, vbo,
- state->src_x >> 16, state->src_y >> 16);
+ state->src.x1 >> 16, state->src.y1 >> 16);
break;
case DRM_FORMAT_NV12:
case DRM_FORMAT_NV16:
@@ -455,11 +455,11 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
dev_dbg(ipu_plane->base.dev->dev,
"phy = %lu %lu, x = %d, y = %d", eba, ubo,
- state->src_x >> 16, state->src_y >> 16);
+ state->src.x1 >> 16, state->src.y1 >> 16);
break;
default:
dev_dbg(ipu_plane->base.dev->dev, "phys = %lu, x = %d, y = %d",
- eba, state->src_x >> 16, state->src_y >> 16);
+ eba, state->src.x1 >> 16, state->src.y1 >> 16);
break;
}
ipu_cpmem_set_buffer(ipu_plane->ipu_ch, 0, eba);
--
2.11.0
More information about the dri-devel
mailing list