[PATCH 0/2] drm/panel: Add support for the Sitronix ST7789V

[Maxime Ripard]

Hi Noralf,

On Fri, Feb 03, 2017 at 07:48:51PM +0100, Noralf Trønnes wrote:
> 
> Den 03.02.2017 10.59, skrev Maxime Ripard:
> > Hi,
> > 
> > Here is an attempt at supporting the ST7789V LCD controller from Sitronix.
> 
> What happens if there's another panel driven by ST7789V that needs
> a different controller initialization?

You know those panels / controllers much better than I do, but why
would that be the case?

> Maybe it's better to name it after the panel, not the controller.

I guess you could also use that panel directly without the controller?

> > It is controlled through an SPI bus, with a twist, since each byte sent
> > must be prefixed by a bit, which needs an 9-bits-per-word SPI controller,
> > which is quite rare. Else, you would need to bitbang it.
> 
> It's possible to support SPI controllers that can't do 9-bit by using
> 8-bit mode and blocks of 9 bytes to send 8x 9-bit words padded with
> zeroes. Zero is MIPI DCS no-op command.

Ah, yes, that makes sense. Thanks for the hint.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20170206/10537d78/attachment.sig>