[PATCH v2] drm/atmel-hlcdc: Simplify the HLCDC layer logic
Boris Brezillon
boris.brezillon at free-electrons.com
Fri Feb 10 18:07:45 UTC 2017
An HLCDC layers in Atmel's nomenclature is either a DRM plane or a 'Post
Processing Layer' which can be used to output the results of the HLCDC
composition in a memory buffer.
atmel_hlcdc_layer.c was designed to be generic enough to be re-usable in
both cases, but we're not exposing the post-processing layer yet, and
even if we were, I'm not sure the code would provide the necessary tools
to manipulate this kind of layer.
Moreover, the code in atmel_hlcdc_{plane,layer}.c was designed before the
atomic modesetting API, and was trying solve the
check-setting/commit-if-ok/rollback-otherwise problem, which is now
entirely solved by the existing core infrastructure.
And finally, the code in atmel_hlcdc_layer.c in over-complicated compared
to what we really need. This rework is a good excuse to simplify it. Note
that this rework solves an existing resource leak (leading to a -EBUSY
error) which I failed to clearly identify.
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
Hi Daniel,
I intentionally dropped your ack, since inheriting from atmel_hlcdc_layer
is implying a lot of changes.
Regards,
Boris
Changes in v2:
- make atmel_hlcdc_plane inherit from atmel_hlcdc_layer
- provide read/write_reg/cfg() helpers to access layer regs
- move all layer related definitions into atmel_hlcdc_dc.h and remove
atmel_hlcdc_layer.h
- fix a bug in atmel_hlcdc_plane_atomic_duplicate_state()
---
drivers/gpu/drm/atmel-hlcdc/Makefile | 1 -
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 39 +-
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 82 +--
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 364 +++++++++++--
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c | 666 ------------------------
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h | 399 --------------
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 637 +++++++++++-----------
7 files changed, 695 insertions(+), 1493 deletions(-)
delete mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
delete mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h
diff --git a/drivers/gpu/drm/atmel-hlcdc/Makefile b/drivers/gpu/drm/atmel-hlcdc/Makefile
index 10ae426e60bd..bb5f8507a8ce 100644
--- a/drivers/gpu/drm/atmel-hlcdc/Makefile
+++ b/drivers/gpu/drm/atmel-hlcdc/Makefile
@@ -1,6 +1,5 @@
atmel-hlcdc-dc-y := atmel_hlcdc_crtc.o \
atmel_hlcdc_dc.o \
- atmel_hlcdc_layer.o \
atmel_hlcdc_output.o \
atmel_hlcdc_plane.o
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index 9b17a66cf0e1..2fcec0a72567 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -445,8 +445,8 @@ static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs = {
int atmel_hlcdc_crtc_create(struct drm_device *dev)
{
+ struct atmel_hlcdc_plane *primary = NULL, *cursor = NULL;
struct atmel_hlcdc_dc *dc = dev->dev_private;
- struct atmel_hlcdc_planes *planes = dc->planes;
struct atmel_hlcdc_crtc *crtc;
int ret;
int i;
@@ -457,20 +457,41 @@ int atmel_hlcdc_crtc_create(struct drm_device *dev)
crtc->dc = dc;
- ret = drm_crtc_init_with_planes(dev, &crtc->base,
- &planes->primary->base,
- planes->cursor ? &planes->cursor->base : NULL,
- &atmel_hlcdc_crtc_funcs, NULL);
+ for (i = 0; i < ATMEL_HLCDC_MAX_LAYERS; i++) {
+ if (!dc->layers[i])
+ continue;
+
+ switch (dc->layers[i]->desc->type) {
+ case ATMEL_HLCDC_BASE_LAYER:
+ primary = atmel_hlcdc_layer_to_plane(dc->layers[i]);
+ break;
+
+ case ATMEL_HLCDC_CURSOR_LAYER:
+ cursor = atmel_hlcdc_layer_to_plane(dc->layers[i]);
+ break;
+
+ default:
+ break;
+ }
+ }
+
+ ret = drm_crtc_init_with_planes(dev, &crtc->base, &primary->base,
+ &cursor->base, &atmel_hlcdc_crtc_funcs,
+ NULL);
if (ret < 0)
goto fail;
crtc->id = drm_crtc_index(&crtc->base);
- if (planes->cursor)
- planes->cursor->base.possible_crtcs = 1 << crtc->id;
+ for (i = 0; i < ATMEL_HLCDC_MAX_LAYERS; i++) {
+ struct atmel_hlcdc_plane *overlay;
- for (i = 0; i < planes->noverlays; i++)
- planes->overlays[i]->base.possible_crtcs = 1 << crtc->id;
+ if (dc->layers[i] &&
+ dc->layers[i]->desc->type == ATMEL_HLCDC_OVERLAY_LAYER) {
+ overlay = atmel_hlcdc_layer_to_plane(dc->layers[i]);
+ overlay->base.possible_crtcs = 1 << crtc->id;
+ }
+ }
drm_crtc_helper_add(&crtc->base, &lcdc_crtc_helper_funcs);
drm_crtc_vblank_reset(&crtc->base);
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index 0bf32d6ac39b..8eb1d7471c63 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -36,7 +36,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9n12_layers[] = {
.regs_offset = 0x40,
.id = 0,
.type = ATMEL_HLCDC_BASE_LAYER,
- .nconfigs = 5,
+ .cfgs_offset = 0x2c,
.layout = {
.xstride = { 2 },
.default_color = 3,
@@ -65,7 +65,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
.regs_offset = 0x40,
.id = 0,
.type = ATMEL_HLCDC_BASE_LAYER,
- .nconfigs = 5,
+ .cfgs_offset = 0x2c,
.layout = {
.xstride = { 2 },
.default_color = 3,
@@ -80,7 +80,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
.regs_offset = 0x100,
.id = 1,
.type = ATMEL_HLCDC_OVERLAY_LAYER,
- .nconfigs = 10,
+ .cfgs_offset = 0x2c,
.layout = {
.pos = 2,
.size = 3,
@@ -98,7 +98,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
.regs_offset = 0x280,
.id = 2,
.type = ATMEL_HLCDC_OVERLAY_LAYER,
- .nconfigs = 17,
+ .cfgs_offset = 0x4c,
.layout = {
.pos = 2,
.size = 3,
@@ -109,6 +109,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
.chroma_key = 10,
.chroma_key_mask = 11,
.general_config = 12,
+ .scaler_config = 13,
.csc = 14,
},
},
@@ -118,9 +119,9 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
.regs_offset = 0x340,
.id = 3,
.type = ATMEL_HLCDC_CURSOR_LAYER,
- .nconfigs = 10,
.max_width = 128,
.max_height = 128,
+ .cfgs_offset = 0x2c,
.layout = {
.pos = 2,
.size = 3,
@@ -153,7 +154,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
.regs_offset = 0x40,
.id = 0,
.type = ATMEL_HLCDC_BASE_LAYER,
- .nconfigs = 7,
+ .cfgs_offset = 0x2c,
.layout = {
.xstride = { 2 },
.default_color = 3,
@@ -168,7 +169,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
.regs_offset = 0x140,
.id = 1,
.type = ATMEL_HLCDC_OVERLAY_LAYER,
- .nconfigs = 10,
+ .cfgs_offset = 0x2c,
.layout = {
.pos = 2,
.size = 3,
@@ -186,7 +187,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
.regs_offset = 0x240,
.id = 2,
.type = ATMEL_HLCDC_OVERLAY_LAYER,
- .nconfigs = 10,
+ .cfgs_offset = 0x2c,
.layout = {
.pos = 2,
.size = 3,
@@ -204,7 +205,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
.regs_offset = 0x340,
.id = 3,
.type = ATMEL_HLCDC_OVERLAY_LAYER,
- .nconfigs = 42,
+ .cfgs_offset = 0x4c,
.layout = {
.pos = 2,
.size = 3,
@@ -215,6 +216,11 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
.chroma_key = 10,
.chroma_key_mask = 11,
.general_config = 12,
+ .scaler_config = 13,
+ .phicoeffs = {
+ .x = 17,
+ .y = 33,
+ },
.csc = 14,
},
},
@@ -224,9 +230,9 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
.regs_offset = 0x440,
.id = 4,
.type = ATMEL_HLCDC_CURSOR_LAYER,
- .nconfigs = 10,
.max_width = 128,
.max_height = 128,
+ .cfgs_offset = 0x2c,
.layout = {
.pos = 2,
.size = 3,
@@ -236,6 +242,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
.chroma_key = 7,
.chroma_key_mask = 8,
.general_config = 9,
+ .scaler_config = 13,
},
},
};
@@ -260,7 +267,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
.regs_offset = 0x40,
.id = 0,
.type = ATMEL_HLCDC_BASE_LAYER,
- .nconfigs = 7,
+ .cfgs_offset = 0x2c,
.layout = {
.xstride = { 2 },
.default_color = 3,
@@ -275,7 +282,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
.regs_offset = 0x140,
.id = 1,
.type = ATMEL_HLCDC_OVERLAY_LAYER,
- .nconfigs = 10,
+ .cfgs_offset = 0x2c,
.layout = {
.pos = 2,
.size = 3,
@@ -293,7 +300,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
.regs_offset = 0x240,
.id = 2,
.type = ATMEL_HLCDC_OVERLAY_LAYER,
- .nconfigs = 10,
+ .cfgs_offset = 0x2c,
.layout = {
.pos = 2,
.size = 3,
@@ -311,7 +318,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
.regs_offset = 0x340,
.id = 3,
.type = ATMEL_HLCDC_OVERLAY_LAYER,
- .nconfigs = 42,
+ .cfgs_offset = 0x4c,
.layout = {
.pos = 2,
.size = 3,
@@ -322,6 +329,11 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
.chroma_key = 10,
.chroma_key_mask = 11,
.general_config = 12,
+ .scaler_config = 13,
+ .phicoeffs = {
+ .x = 17,
+ .y = 33,
+ },
.csc = 14,
},
},
@@ -392,6 +404,17 @@ int atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc,
return MODE_OK;
}
+static void atmel_hlcdc_layer_irq(struct atmel_hlcdc_layer *layer)
+{
+ if (!layer)
+ return;
+
+ if (layer->desc->type == ATMEL_HLCDC_BASE_LAYER ||
+ layer->desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
+ layer->desc->type == ATMEL_HLCDC_CURSOR_LAYER)
+ atmel_hlcdc_plane_irq(atmel_hlcdc_layer_to_plane(layer));
+}
+
static irqreturn_t atmel_hlcdc_dc_irq_handler(int irq, void *data)
{
struct drm_device *dev = data;
@@ -410,12 +433,8 @@ static irqreturn_t atmel_hlcdc_dc_irq_handler(int irq, void *data)
atmel_hlcdc_crtc_irq(dc->crtc);
for (i = 0; i < ATMEL_HLCDC_MAX_LAYERS; i++) {
- struct atmel_hlcdc_layer *layer = dc->layers[i];
-
- if (!(ATMEL_HLCDC_LAYER_STATUS(i) & status) || !layer)
- continue;
-
- atmel_hlcdc_layer_irq(layer);
+ if (ATMEL_HLCDC_LAYER_STATUS(i) & status)
+ atmel_hlcdc_layer_irq(dc->layers[i]);
}
return IRQ_HANDLED;
@@ -537,9 +556,7 @@ static const struct drm_mode_config_funcs mode_config_funcs = {
static int atmel_hlcdc_dc_modeset_init(struct drm_device *dev)
{
struct atmel_hlcdc_dc *dc = dev->dev_private;
- struct atmel_hlcdc_planes *planes;
int ret;
- int i;
drm_mode_config_init(dev);
@@ -549,25 +566,12 @@ static int atmel_hlcdc_dc_modeset_init(struct drm_device *dev)
return ret;
}
- planes = atmel_hlcdc_create_planes(dev);
- if (IS_ERR(planes)) {
- dev_err(dev->dev, "failed to create planes\n");
- return PTR_ERR(planes);
+ ret = atmel_hlcdc_create_planes(dev);
+ if (ret) {
+ dev_err(dev->dev, "failed to create planes: %d\n", ret);
+ return ret;
}
- dc->planes = planes;
-
- dc->layers[planes->primary->layer.desc->id] =
- &planes->primary->layer;
-
- if (planes->cursor)
- dc->layers[planes->cursor->layer.desc->id] =
- &planes->cursor->layer;
-
- for (i = 0; i < planes->noverlays; i++)
- dc->layers[planes->overlays[i]->layer.desc->id] =
- &planes->overlays[i]->layer;
-
ret = atmel_hlcdc_crtc_create(dev);
if (ret) {
dev_err(dev->dev, "failed to create crtc\n");
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
index 7a47f8c094d0..d84c9a56bbb5 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
@@ -23,7 +23,9 @@
#define DRM_ATMEL_HLCDC_H
#include <linux/clk.h>
+#include <linux/dmapool.h>
#include <linux/irqdomain.h>
+#include <linux/mfd/atmel-hlcdc.h>
#include <linux/pwm.h>
#include <drm/drm_atomic.h>
@@ -36,51 +38,245 @@
#include <drm/drm_plane_helper.h>
#include <drm/drmP.h>
-#include "atmel_hlcdc_layer.h"
+#define ATMEL_HLCDC_LAYER_CHER 0x0
+#define ATMEL_HLCDC_LAYER_CHDR 0x4
+#define ATMEL_HLCDC_LAYER_CHSR 0x8
+#define ATMEL_HLCDC_LAYER_EN BIT(0)
+#define ATMEL_HLCDC_LAYER_UPDATE BIT(1)
+#define ATMEL_HLCDC_LAYER_A2Q BIT(2)
+#define ATMEL_HLCDC_LAYER_RST BIT(8)
-#define ATMEL_HLCDC_MAX_LAYERS 5
+#define ATMEL_HLCDC_LAYER_IER 0xc
+#define ATMEL_HLCDC_LAYER_IDR 0x10
+#define ATMEL_HLCDC_LAYER_IMR 0x14
+#define ATMEL_HLCDC_LAYER_ISR 0x18
+#define ATMEL_HLCDC_LAYER_DFETCH BIT(0)
+#define ATMEL_HLCDC_LAYER_LFETCH BIT(1)
+#define ATMEL_HLCDC_LAYER_DMA_IRQ(p) BIT(2 + (8 * (p)))
+#define ATMEL_HLCDC_LAYER_DSCR_IRQ(p) BIT(3 + (8 * (p)))
+#define ATMEL_HLCDC_LAYER_ADD_IRQ(p) BIT(4 + (8 * (p)))
+#define ATMEL_HLCDC_LAYER_DONE_IRQ(p) BIT(5 + (8 * (p)))
+#define ATMEL_HLCDC_LAYER_OVR_IRQ(p) BIT(6 + (8 * (p)))
+
+#define ATMEL_HLCDC_LAYER_PLANE_HEAD(p) (((p) * 0x10) + 0x1c)
+#define ATMEL_HLCDC_LAYER_PLANE_ADDR(p) (((p) * 0x10) + 0x20)
+#define ATMEL_HLCDC_LAYER_PLANE_CTRL(p) (((p) * 0x10) + 0x24)
+#define ATMEL_HLCDC_LAYER_PLANE_NEXT(p) (((p) * 0x10) + 0x28)
+
+#define ATMEL_HLCDC_LAYER_DMA_CFG 0
+#define ATMEL_HLCDC_LAYER_DMA_SIF BIT(0)
+#define ATMEL_HLCDC_LAYER_DMA_BLEN_MASK GENMASK(5, 4)
+#define ATMEL_HLCDC_LAYER_DMA_BLEN_SINGLE (0 << 4)
+#define ATMEL_HLCDC_LAYER_DMA_BLEN_INCR4 (1 << 4)
+#define ATMEL_HLCDC_LAYER_DMA_BLEN_INCR8 (2 << 4)
+#define ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 (3 << 4)
+#define ATMEL_HLCDC_LAYER_DMA_DLBO BIT(8)
+#define ATMEL_HLCDC_LAYER_DMA_ROTDIS BIT(12)
+#define ATMEL_HLCDC_LAYER_DMA_LOCKDIS BIT(13)
+
+#define ATMEL_HLCDC_LAYER_FORMAT_CFG 1
+#define ATMEL_HLCDC_LAYER_RGB (0 << 0)
+#define ATMEL_HLCDC_LAYER_CLUT (1 << 0)
+#define ATMEL_HLCDC_LAYER_YUV (2 << 0)
+#define ATMEL_HLCDC_RGB_MODE(m) \
+ (ATMEL_HLCDC_LAYER_RGB | (((m) & 0xf) << 4))
+#define ATMEL_HLCDC_CLUT_MODE(m) \
+ (ATMEL_HLCDC_LAYER_CLUT | (((m) & 0x3) << 8))
+#define ATMEL_HLCDC_YUV_MODE(m) \
+ (ATMEL_HLCDC_LAYER_YUV | (((m) & 0xf) << 12))
+#define ATMEL_HLCDC_YUV422ROT BIT(16)
+#define ATMEL_HLCDC_YUV422SWP BIT(17)
+#define ATMEL_HLCDC_DSCALEOPT BIT(20)
+
+#define ATMEL_HLCDC_XRGB4444_MODE ATMEL_HLCDC_RGB_MODE(0)
+#define ATMEL_HLCDC_ARGB4444_MODE ATMEL_HLCDC_RGB_MODE(1)
+#define ATMEL_HLCDC_RGBA4444_MODE ATMEL_HLCDC_RGB_MODE(2)
+#define ATMEL_HLCDC_RGB565_MODE ATMEL_HLCDC_RGB_MODE(3)
+#define ATMEL_HLCDC_ARGB1555_MODE ATMEL_HLCDC_RGB_MODE(4)
+#define ATMEL_HLCDC_XRGB8888_MODE ATMEL_HLCDC_RGB_MODE(9)
+#define ATMEL_HLCDC_RGB888_MODE ATMEL_HLCDC_RGB_MODE(10)
+#define ATMEL_HLCDC_ARGB8888_MODE ATMEL_HLCDC_RGB_MODE(12)
+#define ATMEL_HLCDC_RGBA8888_MODE ATMEL_HLCDC_RGB_MODE(13)
+
+#define ATMEL_HLCDC_AYUV_MODE ATMEL_HLCDC_YUV_MODE(0)
+#define ATMEL_HLCDC_YUYV_MODE ATMEL_HLCDC_YUV_MODE(1)
+#define ATMEL_HLCDC_UYVY_MODE ATMEL_HLCDC_YUV_MODE(2)
+#define ATMEL_HLCDC_YVYU_MODE ATMEL_HLCDC_YUV_MODE(3)
+#define ATMEL_HLCDC_VYUY_MODE ATMEL_HLCDC_YUV_MODE(4)
+#define ATMEL_HLCDC_NV61_MODE ATMEL_HLCDC_YUV_MODE(5)
+#define ATMEL_HLCDC_YUV422_MODE ATMEL_HLCDC_YUV_MODE(6)
+#define ATMEL_HLCDC_NV21_MODE ATMEL_HLCDC_YUV_MODE(7)
+#define ATMEL_HLCDC_YUV420_MODE ATMEL_HLCDC_YUV_MODE(8)
+
+#define ATMEL_HLCDC_LAYER_POS(x, y) ((x) | ((y) << 16))
+#define ATMEL_HLCDC_LAYER_SIZE(w, h) (((w) - 1) | (((h) - 1) << 16))
+
+#define ATMEL_HLCDC_LAYER_CRKEY BIT(0)
+#define ATMEL_HLCDC_LAYER_INV BIT(1)
+#define ATMEL_HLCDC_LAYER_ITER2BL BIT(2)
+#define ATMEL_HLCDC_LAYER_ITER BIT(3)
+#define ATMEL_HLCDC_LAYER_REVALPHA BIT(4)
+#define ATMEL_HLCDC_LAYER_GAEN BIT(5)
+#define ATMEL_HLCDC_LAYER_LAEN BIT(6)
+#define ATMEL_HLCDC_LAYER_OVR BIT(7)
+#define ATMEL_HLCDC_LAYER_DMA BIT(8)
+#define ATMEL_HLCDC_LAYER_REP BIT(9)
+#define ATMEL_HLCDC_LAYER_DSTKEY BIT(10)
+#define ATMEL_HLCDC_LAYER_DISCEN BIT(11)
+#define ATMEL_HLCDC_LAYER_GA_SHIFT 16
+#define ATMEL_HLCDC_LAYER_GA_MASK \
+ GENMASK(23, ATMEL_HLCDC_LAYER_GA_SHIFT)
+#define ATMEL_HLCDC_LAYER_GA(x) \
+ ((x) << ATMEL_HLCDC_LAYER_GA_SHIFT)
+
+#define ATMEL_HLCDC_LAYER_DISC_POS(x, y) ((x) | ((y) << 16))
+#define ATMEL_HLCDC_LAYER_DISC_SIZE(w, h) (((w) - 1) | (((h) - 1) << 16))
+
+#define ATMEL_HLCDC_LAYER_SCALER_FACTORS(x, y) ((x) | ((y) << 16))
+#define ATMEL_HLCDC_LAYER_SCALER_ENABLE BIT(31)
+
+#define ATMEL_HLCDC_LAYER_MAX_PLANES 3
+
+#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_RESERVED BIT(0)
+#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_LOADED BIT(1)
+#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE BIT(2)
+#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_OVERRUN BIT(3)
+
+#define ATMEL_HLCDC_MAX_LAYERS 6
/**
- * Atmel HLCDC Display Controller description structure.
+ * Atmel HLCDC Layer registers layout structure
*
- * This structure describe the HLCDC IP capabilities and depends on the
- * HLCDC IP version (or Atmel SoC family).
+ * Each HLCDC layer has its own register organization and a given register
+ * can be placed differently on 2 different layers depending on its
+ * capabilities.
+ * This structure stores common registers layout for a given layer and is
+ * used by HLCDC layer code to choose the appropriate register to write to
+ * or to read from.
*
- * @min_width: minimum width supported by the Display Controller
- * @min_height: minimum height supported by the Display Controller
- * @max_width: maximum width supported by the Display Controller
- * @max_height: maximum height supported by the Display Controller
- * @max_spw: maximum vertical/horizontal pulse width
- * @max_vpw: maximum vertical back/front porch width
- * @max_hpw: maximum horizontal back/front porch width
- * @conflicting_output_formats: true if RGBXXX output formats conflict with
- * each other.
- * @layers: a layer description table describing available layers
- * @nlayers: layer description table size
+ * For all fields, a value of zero means "unsupported".
+ *
+ * See Atmel's datasheet for a detailled description of these registers.
+ *
+ * @xstride: xstride registers
+ * @pstride: pstride registers
+ * @pos: position register
+ * @size: displayed size register
+ * @memsize: memory size register
+ * @default_color: default color register
+ * @chroma_key: chroma key register
+ * @chroma_key_mask: chroma key mask register
+ * @general_config: general layer config register
+ * @sacler_config: scaler factors register
+ * @phicoeffs: X/Y PHI coefficient registers
+ * @disc_pos: discard area position register
+ * @disc_size: discard area size register
+ * @csc: color space conversion register
*/
-struct atmel_hlcdc_dc_desc {
- int min_width;
- int min_height;
+struct atmel_hlcdc_layer_cfg_layout {
+ int xstride[ATMEL_HLCDC_LAYER_MAX_PLANES];
+ int pstride[ATMEL_HLCDC_LAYER_MAX_PLANES];
+ int pos;
+ int size;
+ int memsize;
+ int default_color;
+ int chroma_key;
+ int chroma_key_mask;
+ int general_config;
+ int scaler_config;
+ struct {
+ int x;
+ int y;
+ } phicoeffs;
+ int disc_pos;
+ int disc_size;
+ int csc;
+};
+
+/**
+ * Atmel HLCDC DMA descriptor structure
+ *
+ * This structure is used by the HLCDC DMA engine to schedule a DMA transfer.
+ *
+ * The structure fields must remain in this specific order, because they're
+ * used by the HLCDC DMA engine, which expect them in this order.
+ * HLCDC DMA descriptors must be aligned on 64 bits.
+ *
+ * @addr: buffer DMA address
+ * @ctrl: DMA transfer options
+ * @next: next DMA descriptor to fetch
+ * @self: descriptor DMA address
+ */
+struct atmel_hlcdc_dma_channel_dscr {
+ dma_addr_t addr;
+ u32 ctrl;
+ dma_addr_t next;
+ dma_addr_t self;
+} __aligned(sizeof(u64));
+
+/**
+ * Atmel HLCDC layer types
+ */
+enum atmel_hlcdc_layer_type {
+ ATMEL_HLCDC_NO_LAYER,
+ ATMEL_HLCDC_BASE_LAYER,
+ ATMEL_HLCDC_OVERLAY_LAYER,
+ ATMEL_HLCDC_CURSOR_LAYER,
+ ATMEL_HLCDC_PP_LAYER,
+};
+
+/**
+ * Atmel HLCDC Supported formats structure
+ *
+ * This structure list all the formats supported by a given layer.
+ *
+ * @nformats: number of supported formats
+ * @formats: supported formats
+ */
+struct atmel_hlcdc_formats {
+ int nformats;
+ u32 *formats;
+};
+
+/**
+ * Atmel HLCDC Layer description structure
+ *
+ * This structure describe the capabilities provided by a given layer.
+ *
+ * @name: layer name
+ * @type: layer type
+ * @id: layer id
+ * @regs_offset: offset of the layer registers from the HLCDC registers base
+ * @cfgs_offset: CFGX registers offset from the layer registers base
+ * @formats: supported formats
+ * @layout: config registers layout
+ * @max_width: maximum width supported by this layer (0 means unlimited)
+ * @max_height: maximum height supported by this layer (0 means unlimited)
+ */
+struct atmel_hlcdc_layer_desc {
+ const char *name;
+ enum atmel_hlcdc_layer_type type;
+ int id;
+ int regs_offset;
+ int cfgs_offset;
+ struct atmel_hlcdc_formats *formats;
+ struct atmel_hlcdc_layer_cfg_layout layout;
int max_width;
int max_height;
- int max_spw;
- int max_vpw;
- int max_hpw;
- bool conflicting_output_formats;
- const struct atmel_hlcdc_layer_desc *layers;
- int nlayers;
};
/**
- * Atmel HLCDC Plane properties.
+ * Atmel HLCDC Layer.
*
- * This structure stores plane property definitions.
+ * A layer can be a DRM plane of a post processing layer used to render
+ * HLCDC composition into memory.
*
- * @alpha: alpha blending (or transparency) property
- * @rotation: rotation property
+ * @type: layer type
+ * @plane: pointer to the DRM plane exposed by this layer
*/
-struct atmel_hlcdc_plane_properties {
- struct drm_property *alpha;
+struct atmel_hlcdc_layer {
+ const struct atmel_hlcdc_layer_desc *desc;
+ struct regmap *regmap;
};
/**
@@ -89,12 +285,13 @@ struct atmel_hlcdc_plane_properties {
* @base: base DRM plane structure
* @layer: HLCDC layer structure
* @properties: pointer to the property definitions structure
- * @rotation: current rotation status
+ * @regmap: HLCDC regmap
*/
struct atmel_hlcdc_plane {
struct drm_plane base;
struct atmel_hlcdc_layer layer;
struct atmel_hlcdc_plane_properties *properties;
+ struct regmap *regmap;
};
static inline struct atmel_hlcdc_plane *
@@ -104,27 +301,52 @@ drm_plane_to_atmel_hlcdc_plane(struct drm_plane *p)
}
static inline struct atmel_hlcdc_plane *
-atmel_hlcdc_layer_to_plane(struct atmel_hlcdc_layer *l)
+atmel_hlcdc_layer_to_plane(struct atmel_hlcdc_layer *layer)
{
- return container_of(l, struct atmel_hlcdc_plane, layer);
+ return container_of(layer, struct atmel_hlcdc_plane, layer);
}
/**
- * Atmel HLCDC Planes.
+ * Atmel HLCDC Display Controller description structure.
*
- * This structure stores the instantiated HLCDC Planes and can be accessed by
- * the HLCDC Display Controller or the HLCDC CRTC.
+ * This structure describe the HLCDC IP capabilities and depends on the
+ * HLCDC IP version (or Atmel SoC family).
*
- * @primary: primary plane
- * @cursor: hardware cursor plane
- * @overlays: overlay plane table
- * @noverlays: number of overlay planes
+ * @min_width: minimum width supported by the Display Controller
+ * @min_height: minimum height supported by the Display Controller
+ * @max_width: maximum width supported by the Display Controller
+ * @max_height: maximum height supported by the Display Controller
+ * @max_spw: maximum vertical/horizontal pulse width
+ * @max_vpw: maximum vertical back/front porch width
+ * @max_hpw: maximum horizontal back/front porch width
+ * @conflicting_output_formats: true if RGBXXX output formats conflict with
+ * each other.
+ * @layers: a layer description table describing available layers
+ * @nlayers: layer description table size
*/
-struct atmel_hlcdc_planes {
- struct atmel_hlcdc_plane *primary;
- struct atmel_hlcdc_plane *cursor;
- struct atmel_hlcdc_plane **overlays;
- int noverlays;
+struct atmel_hlcdc_dc_desc {
+ int min_width;
+ int min_height;
+ int max_width;
+ int max_height;
+ int max_spw;
+ int max_vpw;
+ int max_hpw;
+ bool conflicting_output_formats;
+ const struct atmel_hlcdc_layer_desc *layers;
+ int nlayers;
+};
+
+/**
+ * Atmel HLCDC Plane properties.
+ *
+ * This structure stores plane property definitions.
+ *
+ * @alpha: alpha blending (or transparency) property
+ * @rotation: rotation property
+ */
+struct atmel_hlcdc_plane_properties {
+ struct drm_property *alpha;
};
/**
@@ -135,18 +357,18 @@ struct atmel_hlcdc_planes {
* @fbdev: framebuffer device attached to the Display Controller
* @crtc: CRTC provided by the display controller
* @planes: instantiated planes
- * @layers: active HLCDC layer
+ * @layers: active HLCDC layers
* @wq: display controller workqueue
* @commit: used for async commit handling
*/
struct atmel_hlcdc_dc {
const struct atmel_hlcdc_dc_desc *desc;
+ struct dma_pool *dscrpool;
struct atmel_hlcdc *hlcdc;
struct drm_fbdev_cma *fbdev;
struct drm_crtc *crtc;
- struct atmel_hlcdc_planes *planes;
- struct atmel_hlcdc_layer *layers[ATMEL_HLCDC_MAX_LAYERS];
struct workqueue_struct *wq;
+ struct atmel_hlcdc_layer *layers[ATMEL_HLCDC_MAX_LAYERS];
struct {
wait_queue_head_t wait;
bool pending;
@@ -156,11 +378,51 @@ struct atmel_hlcdc_dc {
extern struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_formats;
extern struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_and_yuv_formats;
+static inline void atmel_hlcdc_layer_write_reg(struct atmel_hlcdc_layer *layer,
+ unsigned int reg, u32 val)
+{
+ regmap_write(layer->regmap, layer->desc->regs_offset + reg, val);
+}
+
+static inline u32 atmel_hlcdc_layer_read_reg(struct atmel_hlcdc_layer *layer,
+ unsigned int reg)
+{
+ u32 val;
+
+ regmap_read(layer->regmap, layer->desc->regs_offset + reg, &val);
+
+ return val;
+}
+
+static inline void atmel_hlcdc_layer_write_cfg(struct atmel_hlcdc_layer *layer,
+ unsigned int cfgid, u32 val)
+{
+ atmel_hlcdc_layer_write_reg(layer,
+ layer->desc->cfgs_offset +
+ (cfgid * sizeof(u32)), val);
+}
+
+static inline u32 atmel_hlcdc_layer_read_cfg(struct atmel_hlcdc_layer *layer,
+ unsigned int cfgid)
+{
+ return atmel_hlcdc_layer_read_reg(layer,
+ layer->desc->cfgs_offset +
+ (cfgid * sizeof(u32)));
+}
+
+static inline void atmel_hlcdc_layer_init(struct atmel_hlcdc_layer *layer,
+ const struct atmel_hlcdc_layer_desc *desc,
+ struct regmap *regmap)
+{
+ layer->desc = desc;
+ layer->regmap = regmap;
+}
+
int atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc,
struct drm_display_mode *mode);
-struct atmel_hlcdc_planes *
-atmel_hlcdc_create_planes(struct drm_device *dev);
+int atmel_hlcdc_create_planes(struct drm_device *dev);
+void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane);
int atmel_hlcdc_plane_prepare_disc_area(struct drm_crtc_state *c_state);
int atmel_hlcdc_plane_prepare_ahb_routing(struct drm_crtc_state *c_state);
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
deleted file mode 100644
index 377e43cea9dd..000000000000
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
+++ /dev/null
@@ -1,666 +0,0 @@
-/*
- * Copyright (C) 2014 Free Electrons
- * Copyright (C) 2014 Atmel
- *
- * Author: Boris BREZILLON <boris.brezillon at free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-
-#include "atmel_hlcdc_dc.h"
-
-static void
-atmel_hlcdc_layer_fb_flip_release(struct drm_flip_work *work, void *val)
-{
- struct atmel_hlcdc_layer_fb_flip *flip = val;
-
- if (flip->fb)
- drm_framebuffer_unreference(flip->fb);
- kfree(flip);
-}
-
-static void
-atmel_hlcdc_layer_fb_flip_destroy(struct atmel_hlcdc_layer_fb_flip *flip)
-{
- if (flip->fb)
- drm_framebuffer_unreference(flip->fb);
- kfree(flip->task);
- kfree(flip);
-}
-
-static void
-atmel_hlcdc_layer_fb_flip_release_queue(struct atmel_hlcdc_layer *layer,
- struct atmel_hlcdc_layer_fb_flip *flip)
-{
- int i;
-
- if (!flip)
- return;
-
- for (i = 0; i < layer->max_planes; i++) {
- if (!flip->dscrs[i])
- break;
-
- flip->dscrs[i]->status = 0;
- flip->dscrs[i] = NULL;
- }
-
- drm_flip_work_queue_task(&layer->gc, flip->task);
- drm_flip_work_commit(&layer->gc, layer->wq);
-}
-
-static void atmel_hlcdc_layer_update_reset(struct atmel_hlcdc_layer *layer,
- int id)
-{
- struct atmel_hlcdc_layer_update *upd = &layer->update;
- struct atmel_hlcdc_layer_update_slot *slot;
-
- if (id < 0 || id > 1)
- return;
-
- slot = &upd->slots[id];
- bitmap_clear(slot->updated_configs, 0, layer->desc->nconfigs);
- memset(slot->configs, 0,
- sizeof(*slot->configs) * layer->desc->nconfigs);
-
- if (slot->fb_flip) {
- atmel_hlcdc_layer_fb_flip_release_queue(layer, slot->fb_flip);
- slot->fb_flip = NULL;
- }
-}
-
-static void atmel_hlcdc_layer_update_apply(struct atmel_hlcdc_layer *layer)
-{
- struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
- const struct atmel_hlcdc_layer_desc *desc = layer->desc;
- struct atmel_hlcdc_layer_update *upd = &layer->update;
- struct regmap *regmap = layer->hlcdc->regmap;
- struct atmel_hlcdc_layer_update_slot *slot;
- struct atmel_hlcdc_layer_fb_flip *fb_flip;
- struct atmel_hlcdc_dma_channel_dscr *dscr;
- unsigned int cfg;
- u32 action = 0;
- int i = 0;
-
- if (upd->pending < 0 || upd->pending > 1)
- return;
-
- slot = &upd->slots[upd->pending];
-
- for_each_set_bit(cfg, slot->updated_configs, layer->desc->nconfigs) {
- regmap_write(regmap,
- desc->regs_offset +
- ATMEL_HLCDC_LAYER_CFG(layer, cfg),
- slot->configs[cfg]);
- action |= ATMEL_HLCDC_LAYER_UPDATE;
- }
-
- fb_flip = slot->fb_flip;
-
- if (!fb_flip->fb)
- goto apply;
-
- if (dma->status == ATMEL_HLCDC_LAYER_DISABLED) {
- for (i = 0; i < fb_flip->ngems; i++) {
- dscr = fb_flip->dscrs[i];
- dscr->ctrl = ATMEL_HLCDC_LAYER_DFETCH |
- ATMEL_HLCDC_LAYER_DMA_IRQ |
- ATMEL_HLCDC_LAYER_ADD_IRQ |
- ATMEL_HLCDC_LAYER_DONE_IRQ;
-
- regmap_write(regmap,
- desc->regs_offset +
- ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
- dscr->addr);
- regmap_write(regmap,
- desc->regs_offset +
- ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
- dscr->ctrl);
- regmap_write(regmap,
- desc->regs_offset +
- ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
- dscr->next);
- }
-
- action |= ATMEL_HLCDC_LAYER_DMA_CHAN;
- dma->status = ATMEL_HLCDC_LAYER_ENABLED;
- } else {
- for (i = 0; i < fb_flip->ngems; i++) {
- dscr = fb_flip->dscrs[i];
- dscr->ctrl = ATMEL_HLCDC_LAYER_DFETCH |
- ATMEL_HLCDC_LAYER_DMA_IRQ |
- ATMEL_HLCDC_LAYER_DSCR_IRQ |
- ATMEL_HLCDC_LAYER_DONE_IRQ;
-
- regmap_write(regmap,
- desc->regs_offset +
- ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
- dscr->next);
- }
-
- action |= ATMEL_HLCDC_LAYER_A2Q;
- }
-
- /* Release unneeded descriptors */
- for (i = fb_flip->ngems; i < layer->max_planes; i++) {
- fb_flip->dscrs[i]->status = 0;
- fb_flip->dscrs[i] = NULL;
- }
-
- dma->queue = fb_flip;
- slot->fb_flip = NULL;
-
-apply:
- if (action)
- regmap_write(regmap,
- desc->regs_offset + ATMEL_HLCDC_LAYER_CHER,
- action);
-
- atmel_hlcdc_layer_update_reset(layer, upd->pending);
-
- upd->pending = -1;
-}
-
-void atmel_hlcdc_layer_irq(struct atmel_hlcdc_layer *layer)
-{
- struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
- const struct atmel_hlcdc_layer_desc *desc = layer->desc;
- struct regmap *regmap = layer->hlcdc->regmap;
- struct atmel_hlcdc_layer_fb_flip *flip;
- unsigned long flags;
- unsigned int isr, imr;
- unsigned int status;
- unsigned int plane_status;
- u32 flip_status;
-
- int i;
-
- regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_IMR, &imr);
- regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_ISR, &isr);
- status = imr & isr;
- if (!status)
- return;
-
- spin_lock_irqsave(&layer->lock, flags);
-
- flip = dma->queue ? dma->queue : dma->cur;
-
- if (!flip) {
- spin_unlock_irqrestore(&layer->lock, flags);
- return;
- }
-
- /*
- * Set LOADED and DONE flags: they'll be cleared if at least one
- * memory plane is not LOADED or DONE.
- */
- flip_status = ATMEL_HLCDC_DMA_CHANNEL_DSCR_LOADED |
- ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE;
- for (i = 0; i < flip->ngems; i++) {
- plane_status = (status >> (8 * i));
-
- if (plane_status &
- (ATMEL_HLCDC_LAYER_ADD_IRQ |
- ATMEL_HLCDC_LAYER_DSCR_IRQ) &
- ~flip->dscrs[i]->ctrl) {
- flip->dscrs[i]->status |=
- ATMEL_HLCDC_DMA_CHANNEL_DSCR_LOADED;
- flip->dscrs[i]->ctrl |=
- ATMEL_HLCDC_LAYER_ADD_IRQ |
- ATMEL_HLCDC_LAYER_DSCR_IRQ;
- }
-
- if (plane_status &
- ATMEL_HLCDC_LAYER_DONE_IRQ &
- ~flip->dscrs[i]->ctrl) {
- flip->dscrs[i]->status |=
- ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE;
- flip->dscrs[i]->ctrl |=
- ATMEL_HLCDC_LAYER_DONE_IRQ;
- }
-
- if (plane_status & ATMEL_HLCDC_LAYER_OVR_IRQ)
- flip->dscrs[i]->status |=
- ATMEL_HLCDC_DMA_CHANNEL_DSCR_OVERRUN;
-
- /*
- * Clear LOADED and DONE flags if the memory plane is either
- * not LOADED or not DONE.
- */
- if (!(flip->dscrs[i]->status &
- ATMEL_HLCDC_DMA_CHANNEL_DSCR_LOADED))
- flip_status &= ~ATMEL_HLCDC_DMA_CHANNEL_DSCR_LOADED;
-
- if (!(flip->dscrs[i]->status &
- ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE))
- flip_status &= ~ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE;
-
- /*
- * An overrun on one memory plane impact the whole framebuffer
- * transfer, hence we set the OVERRUN flag as soon as there's
- * one memory plane reporting such an overrun.
- */
- flip_status |= flip->dscrs[i]->status &
- ATMEL_HLCDC_DMA_CHANNEL_DSCR_OVERRUN;
- }
-
- /* Get changed bits */
- flip_status ^= flip->status;
- flip->status |= flip_status;
-
- if (flip_status & ATMEL_HLCDC_DMA_CHANNEL_DSCR_LOADED) {
- atmel_hlcdc_layer_fb_flip_release_queue(layer, dma->cur);
- dma->cur = dma->queue;
- dma->queue = NULL;
- }
-
- if (flip_status & ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE) {
- atmel_hlcdc_layer_fb_flip_release_queue(layer, dma->cur);
- dma->cur = NULL;
- }
-
- if (flip_status & ATMEL_HLCDC_DMA_CHANNEL_DSCR_OVERRUN) {
- regmap_write(regmap,
- desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR,
- ATMEL_HLCDC_LAYER_RST);
- if (dma->queue)
- atmel_hlcdc_layer_fb_flip_release_queue(layer,
- dma->queue);
-
- if (dma->cur)
- atmel_hlcdc_layer_fb_flip_release_queue(layer,
- dma->cur);
-
- dma->cur = NULL;
- dma->queue = NULL;
- }
-
- if (!dma->queue) {
- atmel_hlcdc_layer_update_apply(layer);
-
- if (!dma->cur)
- dma->status = ATMEL_HLCDC_LAYER_DISABLED;
- }
-
- spin_unlock_irqrestore(&layer->lock, flags);
-}
-
-void atmel_hlcdc_layer_disable(struct atmel_hlcdc_layer *layer)
-{
- struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
- struct atmel_hlcdc_layer_update *upd = &layer->update;
- struct regmap *regmap = layer->hlcdc->regmap;
- const struct atmel_hlcdc_layer_desc *desc = layer->desc;
- unsigned long flags;
- unsigned int isr;
-
- spin_lock_irqsave(&layer->lock, flags);
-
- /* Disable the layer */
- regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR,
- ATMEL_HLCDC_LAYER_RST | ATMEL_HLCDC_LAYER_A2Q |
- ATMEL_HLCDC_LAYER_UPDATE);
-
- /* Clear all pending interrupts */
- regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_ISR, &isr);
-
- /* Discard current and queued framebuffer transfers. */
- if (dma->cur) {
- atmel_hlcdc_layer_fb_flip_release_queue(layer, dma->cur);
- dma->cur = NULL;
- }
-
- if (dma->queue) {
- atmel_hlcdc_layer_fb_flip_release_queue(layer, dma->queue);
- dma->queue = NULL;
- }
-
- /*
- * Then discard the pending update request (if any) to prevent
- * DMA irq handler from restarting the DMA channel after it has
- * been disabled.
- */
- if (upd->pending >= 0) {
- atmel_hlcdc_layer_update_reset(layer, upd->pending);
- upd->pending = -1;
- }
-
- dma->status = ATMEL_HLCDC_LAYER_DISABLED;
-
- spin_unlock_irqrestore(&layer->lock, flags);
-}
-
-int atmel_hlcdc_layer_update_start(struct atmel_hlcdc_layer *layer)
-{
- struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
- struct atmel_hlcdc_layer_update *upd = &layer->update;
- struct regmap *regmap = layer->hlcdc->regmap;
- struct atmel_hlcdc_layer_fb_flip *fb_flip;
- struct atmel_hlcdc_layer_update_slot *slot;
- unsigned long flags;
- int i, j = 0;
-
- fb_flip = kzalloc(sizeof(*fb_flip), GFP_KERNEL);
- if (!fb_flip)
- return -ENOMEM;
-
- fb_flip->task = drm_flip_work_allocate_task(fb_flip, GFP_KERNEL);
- if (!fb_flip->task) {
- kfree(fb_flip);
- return -ENOMEM;
- }
-
- spin_lock_irqsave(&layer->lock, flags);
-
- upd->next = upd->pending ? 0 : 1;
-
- slot = &upd->slots[upd->next];
-
- for (i = 0; i < layer->max_planes * 4; i++) {
- if (!dma->dscrs[i].status) {
- fb_flip->dscrs[j++] = &dma->dscrs[i];
- dma->dscrs[i].status =
- ATMEL_HLCDC_DMA_CHANNEL_DSCR_RESERVED;
- if (j == layer->max_planes)
- break;
- }
- }
-
- if (j < layer->max_planes) {
- for (i = 0; i < j; i++)
- fb_flip->dscrs[i]->status = 0;
- }
-
- if (j < layer->max_planes) {
- spin_unlock_irqrestore(&layer->lock, flags);
- atmel_hlcdc_layer_fb_flip_destroy(fb_flip);
- return -EBUSY;
- }
-
- slot->fb_flip = fb_flip;
-
- if (upd->pending >= 0) {
- memcpy(slot->configs,
- upd->slots[upd->pending].configs,
- layer->desc->nconfigs * sizeof(u32));
- memcpy(slot->updated_configs,
- upd->slots[upd->pending].updated_configs,
- DIV_ROUND_UP(layer->desc->nconfigs,
- BITS_PER_BYTE * sizeof(unsigned long)) *
- sizeof(unsigned long));
- slot->fb_flip->fb = upd->slots[upd->pending].fb_flip->fb;
- if (upd->slots[upd->pending].fb_flip->fb) {
- slot->fb_flip->fb =
- upd->slots[upd->pending].fb_flip->fb;
- slot->fb_flip->ngems =
- upd->slots[upd->pending].fb_flip->ngems;
- drm_framebuffer_reference(slot->fb_flip->fb);
- }
- } else {
- regmap_bulk_read(regmap,
- layer->desc->regs_offset +
- ATMEL_HLCDC_LAYER_CFG(layer, 0),
- upd->slots[upd->next].configs,
- layer->desc->nconfigs);
- }
-
- spin_unlock_irqrestore(&layer->lock, flags);
-
- return 0;
-}
-
-void atmel_hlcdc_layer_update_rollback(struct atmel_hlcdc_layer *layer)
-{
- struct atmel_hlcdc_layer_update *upd = &layer->update;
-
- atmel_hlcdc_layer_update_reset(layer, upd->next);
- upd->next = -1;
-}
-
-void atmel_hlcdc_layer_update_set_fb(struct atmel_hlcdc_layer *layer,
- struct drm_framebuffer *fb,
- unsigned int *offsets)
-{
- struct atmel_hlcdc_layer_update *upd = &layer->update;
- struct atmel_hlcdc_layer_fb_flip *fb_flip;
- struct atmel_hlcdc_layer_update_slot *slot;
- struct atmel_hlcdc_dma_channel_dscr *dscr;
- struct drm_framebuffer *old_fb;
- int nplanes = 0;
- int i;
-
- if (upd->next < 0 || upd->next > 1)
- return;
-
- if (fb)
- nplanes = drm_format_num_planes(fb->pixel_format);
-
- if (nplanes > layer->max_planes)
- return;
-
- slot = &upd->slots[upd->next];
-
- fb_flip = slot->fb_flip;
- old_fb = slot->fb_flip->fb;
-
- for (i = 0; i < nplanes; i++) {
- struct drm_gem_cma_object *gem;
-
- dscr = slot->fb_flip->dscrs[i];
- gem = drm_fb_cma_get_gem_obj(fb, i);
- dscr->addr = gem->paddr + offsets[i];
- }
-
- fb_flip->ngems = nplanes;
- fb_flip->fb = fb;
-
- if (fb)
- drm_framebuffer_reference(fb);
-
- if (old_fb)
- drm_framebuffer_unreference(old_fb);
-}
-
-void atmel_hlcdc_layer_update_cfg(struct atmel_hlcdc_layer *layer, int cfg,
- u32 mask, u32 val)
-{
- struct atmel_hlcdc_layer_update *upd = &layer->update;
- struct atmel_hlcdc_layer_update_slot *slot;
-
- if (upd->next < 0 || upd->next > 1)
- return;
-
- if (cfg >= layer->desc->nconfigs)
- return;
-
- slot = &upd->slots[upd->next];
- slot->configs[cfg] &= ~mask;
- slot->configs[cfg] |= (val & mask);
- set_bit(cfg, slot->updated_configs);
-}
-
-void atmel_hlcdc_layer_update_commit(struct atmel_hlcdc_layer *layer)
-{
- struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
- struct atmel_hlcdc_layer_update *upd = &layer->update;
- struct atmel_hlcdc_layer_update_slot *slot;
- unsigned long flags;
-
- if (upd->next < 0 || upd->next > 1)
- return;
-
- slot = &upd->slots[upd->next];
-
- spin_lock_irqsave(&layer->lock, flags);
-
- /*
- * Release pending update request and replace it by the new one.
- */
- if (upd->pending >= 0)
- atmel_hlcdc_layer_update_reset(layer, upd->pending);
-
- upd->pending = upd->next;
- upd->next = -1;
-
- if (!dma->queue)
- atmel_hlcdc_layer_update_apply(layer);
-
- spin_unlock_irqrestore(&layer->lock, flags);
-
-
- upd->next = -1;
-}
-
-static int atmel_hlcdc_layer_dma_init(struct drm_device *dev,
- struct atmel_hlcdc_layer *layer)
-{
- struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
- dma_addr_t dma_addr;
- int i;
-
- dma->dscrs = dma_alloc_coherent(dev->dev,
- layer->max_planes * 4 *
- sizeof(*dma->dscrs),
- &dma_addr, GFP_KERNEL);
- if (!dma->dscrs)
- return -ENOMEM;
-
- for (i = 0; i < layer->max_planes * 4; i++) {
- struct atmel_hlcdc_dma_channel_dscr *dscr = &dma->dscrs[i];
-
- dscr->next = dma_addr + (i * sizeof(*dscr));
- }
-
- return 0;
-}
-
-static void atmel_hlcdc_layer_dma_cleanup(struct drm_device *dev,
- struct atmel_hlcdc_layer *layer)
-{
- struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
- int i;
-
- for (i = 0; i < layer->max_planes * 4; i++) {
- struct atmel_hlcdc_dma_channel_dscr *dscr = &dma->dscrs[i];
-
- dscr->status = 0;
- }
-
- dma_free_coherent(dev->dev, layer->max_planes * 4 *
- sizeof(*dma->dscrs), dma->dscrs,
- dma->dscrs[0].next);
-}
-
-static int atmel_hlcdc_layer_update_init(struct drm_device *dev,
- struct atmel_hlcdc_layer *layer,
- const struct atmel_hlcdc_layer_desc *desc)
-{
- struct atmel_hlcdc_layer_update *upd = &layer->update;
- int updated_size;
- void *buffer;
- int i;
-
- updated_size = DIV_ROUND_UP(desc->nconfigs,
- BITS_PER_BYTE *
- sizeof(unsigned long));
-
- buffer = devm_kzalloc(dev->dev,
- ((desc->nconfigs * sizeof(u32)) +
- (updated_size * sizeof(unsigned long))) * 2,
- GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- for (i = 0; i < 2; i++) {
- upd->slots[i].updated_configs = buffer;
- buffer += updated_size * sizeof(unsigned long);
- upd->slots[i].configs = buffer;
- buffer += desc->nconfigs * sizeof(u32);
- }
-
- upd->pending = -1;
- upd->next = -1;
-
- return 0;
-}
-
-int atmel_hlcdc_layer_init(struct drm_device *dev,
- struct atmel_hlcdc_layer *layer,
- const struct atmel_hlcdc_layer_desc *desc)
-{
- struct atmel_hlcdc_dc *dc = dev->dev_private;
- struct regmap *regmap = dc->hlcdc->regmap;
- unsigned int tmp;
- int ret;
- int i;
-
- layer->hlcdc = dc->hlcdc;
- layer->wq = dc->wq;
- layer->desc = desc;
-
- regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR,
- ATMEL_HLCDC_LAYER_RST);
- for (i = 0; i < desc->formats->nformats; i++) {
- int nplanes = drm_format_num_planes(desc->formats->formats[i]);
-
- if (nplanes > layer->max_planes)
- layer->max_planes = nplanes;
- }
-
- spin_lock_init(&layer->lock);
- drm_flip_work_init(&layer->gc, desc->name,
- atmel_hlcdc_layer_fb_flip_release);
- ret = atmel_hlcdc_layer_dma_init(dev, layer);
- if (ret)
- return ret;
-
- ret = atmel_hlcdc_layer_update_init(dev, layer, desc);
- if (ret)
- return ret;
-
- /* Flush Status Register */
- regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_IDR,
- 0xffffffff);
- regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_ISR,
- &tmp);
-
- tmp = 0;
- for (i = 0; i < layer->max_planes; i++)
- tmp |= (ATMEL_HLCDC_LAYER_DMA_IRQ |
- ATMEL_HLCDC_LAYER_DSCR_IRQ |
- ATMEL_HLCDC_LAYER_ADD_IRQ |
- ATMEL_HLCDC_LAYER_DONE_IRQ |
- ATMEL_HLCDC_LAYER_OVR_IRQ) << (8 * i);
-
- regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_IER, tmp);
-
- return 0;
-}
-
-void atmel_hlcdc_layer_cleanup(struct drm_device *dev,
- struct atmel_hlcdc_layer *layer)
-{
- const struct atmel_hlcdc_layer_desc *desc = layer->desc;
- struct regmap *regmap = layer->hlcdc->regmap;
-
- regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_IDR,
- 0xffffffff);
- regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR,
- ATMEL_HLCDC_LAYER_RST);
-
- atmel_hlcdc_layer_dma_cleanup(dev, layer);
- drm_flip_work_cleanup(&layer->gc);
-}
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h
deleted file mode 100644
index 9beabc940bce..000000000000
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h
+++ /dev/null
@@ -1,399 +0,0 @@
-/*
- * Copyright (C) 2014 Free Electrons
- * Copyright (C) 2014 Atmel
- *
- * Author: Boris BREZILLON <boris.brezillon at free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef DRM_ATMEL_HLCDC_LAYER_H
-#define DRM_ATMEL_HLCDC_LAYER_H
-
-#include <linux/mfd/atmel-hlcdc.h>
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_flip_work.h>
-#include <drm/drmP.h>
-
-#define ATMEL_HLCDC_LAYER_CHER 0x0
-#define ATMEL_HLCDC_LAYER_CHDR 0x4
-#define ATMEL_HLCDC_LAYER_CHSR 0x8
-#define ATMEL_HLCDC_LAYER_DMA_CHAN BIT(0)
-#define ATMEL_HLCDC_LAYER_UPDATE BIT(1)
-#define ATMEL_HLCDC_LAYER_A2Q BIT(2)
-#define ATMEL_HLCDC_LAYER_RST BIT(8)
-
-#define ATMEL_HLCDC_LAYER_IER 0xc
-#define ATMEL_HLCDC_LAYER_IDR 0x10
-#define ATMEL_HLCDC_LAYER_IMR 0x14
-#define ATMEL_HLCDC_LAYER_ISR 0x18
-#define ATMEL_HLCDC_LAYER_DFETCH BIT(0)
-#define ATMEL_HLCDC_LAYER_LFETCH BIT(1)
-#define ATMEL_HLCDC_LAYER_DMA_IRQ BIT(2)
-#define ATMEL_HLCDC_LAYER_DSCR_IRQ BIT(3)
-#define ATMEL_HLCDC_LAYER_ADD_IRQ BIT(4)
-#define ATMEL_HLCDC_LAYER_DONE_IRQ BIT(5)
-#define ATMEL_HLCDC_LAYER_OVR_IRQ BIT(6)
-
-#define ATMEL_HLCDC_LAYER_PLANE_HEAD(n) (((n) * 0x10) + 0x1c)
-#define ATMEL_HLCDC_LAYER_PLANE_ADDR(n) (((n) * 0x10) + 0x20)
-#define ATMEL_HLCDC_LAYER_PLANE_CTRL(n) (((n) * 0x10) + 0x24)
-#define ATMEL_HLCDC_LAYER_PLANE_NEXT(n) (((n) * 0x10) + 0x28)
-#define ATMEL_HLCDC_LAYER_CFG(p, c) (((c) * 4) + ((p)->max_planes * 0x10) + 0x1c)
-
-#define ATMEL_HLCDC_LAYER_DMA_CFG_ID 0
-#define ATMEL_HLCDC_LAYER_DMA_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, ATMEL_HLCDC_LAYER_DMA_CFG_ID)
-#define ATMEL_HLCDC_LAYER_DMA_SIF BIT(0)
-#define ATMEL_HLCDC_LAYER_DMA_BLEN_MASK GENMASK(5, 4)
-#define ATMEL_HLCDC_LAYER_DMA_BLEN_SINGLE (0 << 4)
-#define ATMEL_HLCDC_LAYER_DMA_BLEN_INCR4 (1 << 4)
-#define ATMEL_HLCDC_LAYER_DMA_BLEN_INCR8 (2 << 4)
-#define ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 (3 << 4)
-#define ATMEL_HLCDC_LAYER_DMA_DLBO BIT(8)
-#define ATMEL_HLCDC_LAYER_DMA_ROTDIS BIT(12)
-#define ATMEL_HLCDC_LAYER_DMA_LOCKDIS BIT(13)
-
-#define ATMEL_HLCDC_LAYER_FORMAT_CFG_ID 1
-#define ATMEL_HLCDC_LAYER_FORMAT_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, ATMEL_HLCDC_LAYER_FORMAT_CFG_ID)
-#define ATMEL_HLCDC_LAYER_RGB (0 << 0)
-#define ATMEL_HLCDC_LAYER_CLUT (1 << 0)
-#define ATMEL_HLCDC_LAYER_YUV (2 << 0)
-#define ATMEL_HLCDC_RGB_MODE(m) (((m) & 0xf) << 4)
-#define ATMEL_HLCDC_CLUT_MODE(m) (((m) & 0x3) << 8)
-#define ATMEL_HLCDC_YUV_MODE(m) (((m) & 0xf) << 12)
-#define ATMEL_HLCDC_YUV422ROT BIT(16)
-#define ATMEL_HLCDC_YUV422SWP BIT(17)
-#define ATMEL_HLCDC_DSCALEOPT BIT(20)
-
-#define ATMEL_HLCDC_XRGB4444_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(0))
-#define ATMEL_HLCDC_ARGB4444_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(1))
-#define ATMEL_HLCDC_RGBA4444_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(2))
-#define ATMEL_HLCDC_RGB565_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(3))
-#define ATMEL_HLCDC_ARGB1555_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(4))
-#define ATMEL_HLCDC_XRGB8888_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(9))
-#define ATMEL_HLCDC_RGB888_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(10))
-#define ATMEL_HLCDC_ARGB8888_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(12))
-#define ATMEL_HLCDC_RGBA8888_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(13))
-
-#define ATMEL_HLCDC_AYUV_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(0))
-#define ATMEL_HLCDC_YUYV_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(1))
-#define ATMEL_HLCDC_UYVY_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(2))
-#define ATMEL_HLCDC_YVYU_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(3))
-#define ATMEL_HLCDC_VYUY_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(4))
-#define ATMEL_HLCDC_NV61_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(5))
-#define ATMEL_HLCDC_YUV422_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(6))
-#define ATMEL_HLCDC_NV21_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(7))
-#define ATMEL_HLCDC_YUV420_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(8))
-
-#define ATMEL_HLCDC_LAYER_POS_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.pos)
-#define ATMEL_HLCDC_LAYER_SIZE_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.size)
-#define ATMEL_HLCDC_LAYER_MEMSIZE_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.memsize)
-#define ATMEL_HLCDC_LAYER_XSTRIDE_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.xstride)
-#define ATMEL_HLCDC_LAYER_PSTRIDE_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.pstride)
-#define ATMEL_HLCDC_LAYER_DFLTCOLOR_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.default_color)
-#define ATMEL_HLCDC_LAYER_CRKEY_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.chroma_key)
-#define ATMEL_HLCDC_LAYER_CRKEY_MASK_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.chroma_key_mask)
-
-#define ATMEL_HLCDC_LAYER_GENERAL_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.general_config)
-#define ATMEL_HLCDC_LAYER_CRKEY BIT(0)
-#define ATMEL_HLCDC_LAYER_INV BIT(1)
-#define ATMEL_HLCDC_LAYER_ITER2BL BIT(2)
-#define ATMEL_HLCDC_LAYER_ITER BIT(3)
-#define ATMEL_HLCDC_LAYER_REVALPHA BIT(4)
-#define ATMEL_HLCDC_LAYER_GAEN BIT(5)
-#define ATMEL_HLCDC_LAYER_LAEN BIT(6)
-#define ATMEL_HLCDC_LAYER_OVR BIT(7)
-#define ATMEL_HLCDC_LAYER_DMA BIT(8)
-#define ATMEL_HLCDC_LAYER_REP BIT(9)
-#define ATMEL_HLCDC_LAYER_DSTKEY BIT(10)
-#define ATMEL_HLCDC_LAYER_DISCEN BIT(11)
-#define ATMEL_HLCDC_LAYER_GA_SHIFT 16
-#define ATMEL_HLCDC_LAYER_GA_MASK GENMASK(23, ATMEL_HLCDC_LAYER_GA_SHIFT)
-#define ATMEL_HLCDC_LAYER_GA(x) ((x) << ATMEL_HLCDC_LAYER_GA_SHIFT)
-
-#define ATMEL_HLCDC_LAYER_CSC_CFG(p, o) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.csc + o)
-
-#define ATMEL_HLCDC_LAYER_DISC_POS_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.disc_pos)
-
-#define ATMEL_HLCDC_LAYER_DISC_SIZE_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.disc_size)
-
-#define ATMEL_HLCDC_MAX_PLANES 3
-
-#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_RESERVED BIT(0)
-#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_LOADED BIT(1)
-#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE BIT(2)
-#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_OVERRUN BIT(3)
-
-/**
- * Atmel HLCDC Layer registers layout structure
- *
- * Each HLCDC layer has its own register organization and a given register
- * can be placed differently on 2 different layers depending on its
- * capabilities.
- * This structure stores common registers layout for a given layer and is
- * used by HLCDC layer code to choose the appropriate register to write to
- * or to read from.
- *
- * For all fields, a value of zero means "unsupported".
- *
- * See Atmel's datasheet for a detailled description of these registers.
- *
- * @xstride: xstride registers
- * @pstride: pstride registers
- * @pos: position register
- * @size: displayed size register
- * @memsize: memory size register
- * @default_color: default color register
- * @chroma_key: chroma key register
- * @chroma_key_mask: chroma key mask register
- * @general_config: general layer config register
- * @disc_pos: discard area position register
- * @disc_size: discard area size register
- * @csc: color space conversion register
- */
-struct atmel_hlcdc_layer_cfg_layout {
- int xstride[ATMEL_HLCDC_MAX_PLANES];
- int pstride[ATMEL_HLCDC_MAX_PLANES];
- int pos;
- int size;
- int memsize;
- int default_color;
- int chroma_key;
- int chroma_key_mask;
- int general_config;
- int disc_pos;
- int disc_size;
- int csc;
-};
-
-/**
- * Atmel HLCDC framebuffer flip structure
- *
- * This structure is allocated when someone asked for a layer update (most
- * likely a DRM plane update, either primary, overlay or cursor plane) and
- * released when the layer do not need to reference the framebuffer object
- * anymore (i.e. the layer was disabled or updated).
- *
- * @dscrs: DMA descriptors
- * @fb: the referenced framebuffer object
- * @ngems: number of GEM objects referenced by the fb element
- * @status: fb flip operation status
- */
-struct atmel_hlcdc_layer_fb_flip {
- struct atmel_hlcdc_dma_channel_dscr *dscrs[ATMEL_HLCDC_MAX_PLANES];
- struct drm_flip_task *task;
- struct drm_framebuffer *fb;
- int ngems;
- u32 status;
-};
-
-/**
- * Atmel HLCDC DMA descriptor structure
- *
- * This structure is used by the HLCDC DMA engine to schedule a DMA transfer.
- *
- * The structure fields must remain in this specific order, because they're
- * used by the HLCDC DMA engine, which expect them in this order.
- * HLCDC DMA descriptors must be aligned on 64 bits.
- *
- * @addr: buffer DMA address
- * @ctrl: DMA transfer options
- * @next: next DMA descriptor to fetch
- * @gem_flip: the attached gem_flip operation
- */
-struct atmel_hlcdc_dma_channel_dscr {
- dma_addr_t addr;
- u32 ctrl;
- dma_addr_t next;
- u32 status;
-} __aligned(sizeof(u64));
-
-/**
- * Atmel HLCDC layer types
- */
-enum atmel_hlcdc_layer_type {
- ATMEL_HLCDC_BASE_LAYER,
- ATMEL_HLCDC_OVERLAY_LAYER,
- ATMEL_HLCDC_CURSOR_LAYER,
- ATMEL_HLCDC_PP_LAYER,
-};
-
-/**
- * Atmel HLCDC Supported formats structure
- *
- * This structure list all the formats supported by a given layer.
- *
- * @nformats: number of supported formats
- * @formats: supported formats
- */
-struct atmel_hlcdc_formats {
- int nformats;
- uint32_t *formats;
-};
-
-/**
- * Atmel HLCDC Layer description structure
- *
- * This structure describe the capabilities provided by a given layer.
- *
- * @name: layer name
- * @type: layer type
- * @id: layer id
- * @regs_offset: offset of the layer registers from the HLCDC registers base
- * @nconfigs: number of config registers provided by this layer
- * @formats: supported formats
- * @layout: config registers layout
- * @max_width: maximum width supported by this layer (0 means unlimited)
- * @max_height: maximum height supported by this layer (0 means unlimited)
- */
-struct atmel_hlcdc_layer_desc {
- const char *name;
- enum atmel_hlcdc_layer_type type;
- int id;
- int regs_offset;
- int nconfigs;
- struct atmel_hlcdc_formats *formats;
- struct atmel_hlcdc_layer_cfg_layout layout;
- int max_width;
- int max_height;
-};
-
-/**
- * Atmel HLCDC Layer Update Slot structure
- *
- * This structure stores layer update requests to be applied on next frame.
- * This is the base structure behind the atomic layer update infrastructure.
- *
- * Atomic layer update provides a way to update all layer's parameters
- * simultaneously. This is needed to avoid incompatible sequential updates
- * like this one:
- * 1) update layer format from RGB888 (1 plane/buffer) to YUV422
- * (2 planes/buffers)
- * 2) the format update is applied but the DMA channel for the second
- * plane/buffer is not enabled
- * 3) enable the DMA channel for the second plane
- *
- * @fb_flip: fb_flip object
- * @updated_configs: bitmask used to record modified configs
- * @configs: new config values
- */
-struct atmel_hlcdc_layer_update_slot {
- struct atmel_hlcdc_layer_fb_flip *fb_flip;
- unsigned long *updated_configs;
- u32 *configs;
-};
-
-/**
- * Atmel HLCDC Layer Update structure
- *
- * This structure provides a way to queue layer update requests.
- *
- * At a given time there is at most:
- * - one pending update request, which means the update request has been
- * committed (or validated) and is waiting for the DMA channel(s) to be
- * available
- * - one request being prepared, which means someone started a layer update
- * but has not committed it yet. There cannot be more than one started
- * request, because the update lock is taken when starting a layer update
- * and release when committing or rolling back the request.
- *
- * @slots: update slots. One is used for pending request and the other one
- * for started update request
- * @pending: the pending slot index or -1 if no request is pending
- * @next: the started update slot index or -1 no update has been started
- */
-struct atmel_hlcdc_layer_update {
- struct atmel_hlcdc_layer_update_slot slots[2];
- int pending;
- int next;
-};
-
-enum atmel_hlcdc_layer_dma_channel_status {
- ATMEL_HLCDC_LAYER_DISABLED,
- ATMEL_HLCDC_LAYER_ENABLED,
- ATMEL_HLCDC_LAYER_DISABLING,
-};
-
-/**
- * Atmel HLCDC Layer DMA channel structure
- *
- * This structure stores information on the DMA channel associated to a
- * given layer.
- *
- * @status: DMA channel status
- * @cur: current framebuffer
- * @queue: next framebuffer
- * @dscrs: allocated DMA descriptors
- */
-struct atmel_hlcdc_layer_dma_channel {
- enum atmel_hlcdc_layer_dma_channel_status status;
- struct atmel_hlcdc_layer_fb_flip *cur;
- struct atmel_hlcdc_layer_fb_flip *queue;
- struct atmel_hlcdc_dma_channel_dscr *dscrs;
-};
-
-/**
- * Atmel HLCDC Layer structure
- *
- * This structure stores information on the layer instance.
- *
- * @desc: layer description
- * @max_planes: maximum planes/buffers that can be associated with this layer.
- * This depends on the supported formats.
- * @hlcdc: pointer to the atmel_hlcdc structure provided by the MFD device
- * @dma: dma channel
- * @gc: fb flip garbage collector
- * @update: update handler
- * @lock: layer lock
- */
-struct atmel_hlcdc_layer {
- const struct atmel_hlcdc_layer_desc *desc;
- int max_planes;
- struct atmel_hlcdc *hlcdc;
- struct workqueue_struct *wq;
- struct drm_flip_work gc;
- struct atmel_hlcdc_layer_dma_channel dma;
- struct atmel_hlcdc_layer_update update;
- spinlock_t lock;
-};
-
-void atmel_hlcdc_layer_irq(struct atmel_hlcdc_layer *layer);
-
-int atmel_hlcdc_layer_init(struct drm_device *dev,
- struct atmel_hlcdc_layer *layer,
- const struct atmel_hlcdc_layer_desc *desc);
-
-void atmel_hlcdc_layer_cleanup(struct drm_device *dev,
- struct atmel_hlcdc_layer *layer);
-
-void atmel_hlcdc_layer_disable(struct atmel_hlcdc_layer *layer);
-
-int atmel_hlcdc_layer_update_start(struct atmel_hlcdc_layer *layer);
-
-void atmel_hlcdc_layer_update_cfg(struct atmel_hlcdc_layer *layer, int cfg,
- u32 mask, u32 val);
-
-void atmel_hlcdc_layer_update_set_fb(struct atmel_hlcdc_layer *layer,
- struct drm_framebuffer *fb,
- unsigned int *offsets);
-
-void atmel_hlcdc_layer_update_set_finished(struct atmel_hlcdc_layer *layer,
- void (*finished)(void *data),
- void *finished_data);
-
-void atmel_hlcdc_layer_update_rollback(struct atmel_hlcdc_layer *layer);
-
-void atmel_hlcdc_layer_update_commit(struct atmel_hlcdc_layer *layer);
-
-#endif /* DRM_ATMEL_HLCDC_LAYER_H */
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
index 246ed1e33d8a..cb6b2d5ae50b 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
@@ -37,7 +37,6 @@
* @xstride: value to add to the pixel pointer between each line
* @pstride: value to add to the pixel pointer between each pixel
* @nplanes: number of planes (deduced from pixel_format)
- * @prepared: plane update has been prepared
*/
struct atmel_hlcdc_plane_state {
struct drm_plane_state base;
@@ -52,8 +51,6 @@ struct atmel_hlcdc_plane_state {
u8 alpha;
- bool disc_updated;
-
int disc_x;
int disc_y;
int disc_w;
@@ -62,12 +59,14 @@ struct atmel_hlcdc_plane_state {
int ahb_id;
/* These fields are private and should not be touched */
- int bpp[ATMEL_HLCDC_MAX_PLANES];
- unsigned int offsets[ATMEL_HLCDC_MAX_PLANES];
- int xstride[ATMEL_HLCDC_MAX_PLANES];
- int pstride[ATMEL_HLCDC_MAX_PLANES];
+ int bpp[ATMEL_HLCDC_LAYER_MAX_PLANES];
+ unsigned int offsets[ATMEL_HLCDC_LAYER_MAX_PLANES];
+ int xstride[ATMEL_HLCDC_LAYER_MAX_PLANES];
+ int pstride[ATMEL_HLCDC_LAYER_MAX_PLANES];
int nplanes;
- bool prepared;
+
+ /* DMA descriptors. */
+ struct atmel_hlcdc_dma_channel_dscr *dscrs[ATMEL_HLCDC_LAYER_MAX_PLANES];
};
static inline struct atmel_hlcdc_plane_state *
@@ -259,125 +258,146 @@ static u32 heo_upscaling_ycoef[] = {
0x00205907,
};
+#define ATMEL_HLCDC_XPHIDEF 4
+#define ATMEL_HLCDC_YPHIDEF 4
+
+static u32 atmel_hlcdc_plane_phiscaler_get_factor(u32 srcsize,
+ u32 dstsize,
+ u32 phidef)
+{
+ u32 factor, max_memsize;
+
+ factor = (256 * ((8 * (srcsize - 1)) - phidef)) / (dstsize - 1);
+ max_memsize = ((factor * (dstsize - 1)) + (256 * phidef)) / 2048;
+
+ if (max_memsize > srcsize - 1)
+ factor--;
+
+ return factor;
+}
+
static void
-atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
- struct atmel_hlcdc_plane_state *state)
+atmel_hlcdc_plane_scaler_set_phicoeff(struct atmel_hlcdc_plane *plane,
+ const u32 *coeff_tab, int size,
+ unsigned int cfg_offs)
{
- const struct atmel_hlcdc_layer_cfg_layout *layout =
- &plane->layer.desc->layout;
-
- if (layout->size)
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- layout->size,
- 0xffffffff,
- (state->crtc_w - 1) |
- ((state->crtc_h - 1) << 16));
-
- if (layout->memsize)
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- layout->memsize,
- 0xffffffff,
- (state->src_w - 1) |
- ((state->src_h - 1) << 16));
-
- if (layout->pos)
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- layout->pos,
- 0xffffffff,
- state->crtc_x |
- (state->crtc_y << 16));
-
- /* TODO: rework the rescaling part */
- if (state->crtc_w != state->src_w || state->crtc_h != state->src_h) {
- u32 factor_reg = 0;
-
- if (state->crtc_w != state->src_w) {
- int i;
- u32 factor;
- u32 *coeff_tab = heo_upscaling_xcoef;
- u32 max_memsize;
-
- if (state->crtc_w < state->src_w)
- coeff_tab = heo_downscaling_xcoef;
- for (i = 0; i < ARRAY_SIZE(heo_upscaling_xcoef); i++)
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- 17 + i,
- 0xffffffff,
- coeff_tab[i]);
- factor = ((8 * 256 * state->src_w) - (256 * 4)) /
- state->crtc_w;
- factor++;
- max_memsize = ((factor * state->crtc_w) + (256 * 4)) /
- 2048;
- if (max_memsize > state->src_w)
- factor--;
- factor_reg |= factor | 0x80000000;
- }
+ int i;
- if (state->crtc_h != state->src_h) {
- int i;
- u32 factor;
- u32 *coeff_tab = heo_upscaling_ycoef;
- u32 max_memsize;
-
- if (state->crtc_h < state->src_h)
- coeff_tab = heo_downscaling_ycoef;
- for (i = 0; i < ARRAY_SIZE(heo_upscaling_ycoef); i++)
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- 33 + i,
- 0xffffffff,
- coeff_tab[i]);
- factor = ((8 * 256 * state->src_h) - (256 * 4)) /
- state->crtc_h;
- factor++;
- max_memsize = ((factor * state->crtc_h) + (256 * 4)) /
- 2048;
- if (max_memsize > state->src_h)
- factor--;
- factor_reg |= (factor << 16) | 0x80000000;
- }
+ for (i = 0; i < size; i++)
+ atmel_hlcdc_layer_write_cfg(&plane->layer, cfg_offs + i,
+ coeff_tab[i]);
+}
+
+void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state)
+{
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ u32 xfactor, yfactor;
+
+ if (!desc->layout.scaler_config)
+ return;
- atmel_hlcdc_layer_update_cfg(&plane->layer, 13, 0xffffffff,
- factor_reg);
+ if (state->crtc_w == state->src_w && state->crtc_h == state->src_h) {
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.scaler_config, 0);
+ return;
+ }
+
+ if (desc->layout.phicoeffs.x) {
+ xfactor = atmel_hlcdc_plane_phiscaler_get_factor(state->src_w,
+ state->crtc_w,
+ ATMEL_HLCDC_XPHIDEF);
+
+ yfactor = atmel_hlcdc_plane_phiscaler_get_factor(state->src_h,
+ state->crtc_h,
+ ATMEL_HLCDC_YPHIDEF);
+
+ atmel_hlcdc_plane_scaler_set_phicoeff(plane,
+ state->crtc_w < state->src_w ?
+ heo_downscaling_xcoef :
+ heo_upscaling_xcoef,
+ ARRAY_SIZE(heo_upscaling_xcoef),
+ desc->layout.phicoeffs.x);
+
+ atmel_hlcdc_plane_scaler_set_phicoeff(plane,
+ state->crtc_h < state->src_h ?
+ heo_downscaling_ycoef :
+ heo_upscaling_ycoef,
+ ARRAY_SIZE(heo_upscaling_ycoef),
+ desc->layout.phicoeffs.y);
} else {
- atmel_hlcdc_layer_update_cfg(&plane->layer, 13, 0xffffffff, 0);
+ xfactor = (1024 * state->src_w) / state->crtc_w;
+ yfactor = (1024 * state->src_h) / state->crtc_h;
}
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config,
+ ATMEL_HLCDC_LAYER_SCALER_ENABLE |
+ ATMEL_HLCDC_LAYER_SCALER_FACTORS(xfactor,
+ yfactor));
+}
+
+static void
+atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state)
+{
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+
+ if (desc->layout.size)
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.size,
+ ATMEL_HLCDC_LAYER_SIZE(state->crtc_w,
+ state->crtc_h));
+
+ if (desc->layout.memsize)
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.memsize,
+ ATMEL_HLCDC_LAYER_SIZE(state->src_w,
+ state->src_h));
+
+ if (desc->layout.pos)
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.pos,
+ ATMEL_HLCDC_LAYER_POS(state->crtc_x,
+ state->crtc_y));
+
+ atmel_hlcdc_plane_setup_scaler(plane, state);
}
static void
atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
struct atmel_hlcdc_plane_state *state)
{
- const struct atmel_hlcdc_layer_cfg_layout *layout =
- &plane->layer.desc->layout;
- unsigned int cfg = ATMEL_HLCDC_LAYER_DMA;
+ unsigned int cfg = ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id;
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+
+ /*
+ * Rotation optimization is not working on RGB888 (rotation is still
+ * working but without any optimization).
+ */
+ if (state->base.fb->pixel_format == DRM_FORMAT_RGB888)
+ cfg |= ATMEL_HLCDC_LAYER_DMA_ROTDIS;
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_HLCDC_LAYER_DMA_CFG,
+ cfg);
+
+ cfg = ATMEL_HLCDC_LAYER_DMA;
if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
+ u32 format = state->base.fb->pixel_format;
+
cfg |= ATMEL_HLCDC_LAYER_OVR | ATMEL_HLCDC_LAYER_ITER2BL |
ATMEL_HLCDC_LAYER_ITER;
- if (atmel_hlcdc_format_embeds_alpha(state->base.fb->pixel_format))
+ if (atmel_hlcdc_format_embeds_alpha(format))
cfg |= ATMEL_HLCDC_LAYER_LAEN;
else
cfg |= ATMEL_HLCDC_LAYER_GAEN |
ATMEL_HLCDC_LAYER_GA(state->alpha);
}
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- ATMEL_HLCDC_LAYER_DMA_CFG_ID,
- ATMEL_HLCDC_LAYER_DMA_BLEN_MASK |
- ATMEL_HLCDC_LAYER_DMA_SIF,
- ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 |
- state->ahb_id);
-
- atmel_hlcdc_layer_update_cfg(&plane->layer, layout->general_config,
- ATMEL_HLCDC_LAYER_ITER2BL |
- ATMEL_HLCDC_LAYER_ITER |
- ATMEL_HLCDC_LAYER_GAEN |
- ATMEL_HLCDC_LAYER_GA_MASK |
- ATMEL_HLCDC_LAYER_LAEN |
- ATMEL_HLCDC_LAYER_OVR |
- ATMEL_HLCDC_LAYER_DMA, cfg);
+ if (state->disc_h * state->disc_w)
+ cfg |= ATMEL_HLCDC_LAYER_DISCEN;
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.general_config,
+ cfg);
}
static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
@@ -396,50 +416,51 @@ static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
drm_rotation_90_or_270(state->base.rotation))
cfg |= ATMEL_HLCDC_YUV422ROT;
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- ATMEL_HLCDC_LAYER_FORMAT_CFG_ID,
- 0xffffffff,
- cfg);
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ ATMEL_HLCDC_LAYER_FORMAT_CFG, cfg);
- /*
- * Rotation optimization is not working on RGB888 (rotation is still
- * working but without any optimization).
- */
- if (state->base.fb->pixel_format == DRM_FORMAT_RGB888)
- cfg = ATMEL_HLCDC_LAYER_DMA_ROTDIS;
- else
- cfg = 0;
-
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- ATMEL_HLCDC_LAYER_DMA_CFG_ID,
- ATMEL_HLCDC_LAYER_DMA_ROTDIS, cfg);
}
static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
struct atmel_hlcdc_plane_state *state)
{
- struct atmel_hlcdc_layer *layer = &plane->layer;
- const struct atmel_hlcdc_layer_cfg_layout *layout =
- &layer->desc->layout;
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ struct drm_framebuffer *fb = state->base.fb;
+ u32 sr;
int i;
- atmel_hlcdc_layer_update_set_fb(&plane->layer, state->base.fb,
- state->offsets);
+ sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
for (i = 0; i < state->nplanes; i++) {
- if (layout->xstride[i]) {
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- layout->xstride[i],
- 0xffffffff,
- state->xstride[i]);
+ struct drm_gem_cma_object *gem = drm_fb_cma_get_gem_obj(fb, i);
+
+ state->dscrs[i]->addr = gem->paddr + state->offsets[i];
+
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
+ state->dscrs[i]->self);
+
+ if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
+ state->dscrs[i]->addr);
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
+ state->dscrs[i]->ctrl);
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
+ state->dscrs[i]->self);
}
- if (layout->pstride[i]) {
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- layout->pstride[i],
- 0xffffffff,
- state->pstride[i]);
- }
+ if (desc->layout.xstride[i])
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.xstride[i],
+ state->xstride[i]);
+
+ if (desc->layout.pstride[i])
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.pstride[i],
+ state->pstride[i]);
}
}
@@ -528,18 +549,10 @@ atmel_hlcdc_plane_prepare_disc_area(struct drm_crtc_state *c_state)
disc_w = ovl_state->crtc_w;
}
- if (disc_x == primary_state->disc_x &&
- disc_y == primary_state->disc_y &&
- disc_w == primary_state->disc_w &&
- disc_h == primary_state->disc_h)
- return 0;
-
-
primary_state->disc_x = disc_x;
primary_state->disc_y = disc_y;
primary_state->disc_w = disc_w;
primary_state->disc_h = disc_h;
- primary_state->disc_updated = true;
return 0;
}
@@ -548,32 +561,19 @@ static void
atmel_hlcdc_plane_update_disc_area(struct atmel_hlcdc_plane *plane,
struct atmel_hlcdc_plane_state *state)
{
- const struct atmel_hlcdc_layer_cfg_layout *layout =
- &plane->layer.desc->layout;
- int disc_surface = 0;
-
- if (!state->disc_updated)
- return;
-
- disc_surface = state->disc_h * state->disc_w;
-
- atmel_hlcdc_layer_update_cfg(&plane->layer, layout->general_config,
- ATMEL_HLCDC_LAYER_DISCEN,
- disc_surface ? ATMEL_HLCDC_LAYER_DISCEN : 0);
+ const struct atmel_hlcdc_layer_cfg_layout *layout;
- if (!disc_surface)
+ layout = &plane->layer.desc->layout;
+ if (!layout->disc_pos || !layout->disc_size)
return;
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- layout->disc_pos,
- 0xffffffff,
- state->disc_x | (state->disc_y << 16));
+ atmel_hlcdc_layer_write_cfg(&plane->layer, layout->disc_pos,
+ ATMEL_HLCDC_LAYER_DISC_POS(state->disc_x,
+ state->disc_y));
- atmel_hlcdc_layer_update_cfg(&plane->layer,
- layout->disc_size,
- 0xffffffff,
- (state->disc_w - 1) |
- ((state->disc_h - 1) << 16));
+ atmel_hlcdc_layer_write_cfg(&plane->layer, layout->disc_size,
+ ATMEL_HLCDC_LAYER_DISC_SIZE(state->disc_w,
+ state->disc_h));
}
static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
@@ -582,8 +582,7 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
struct atmel_hlcdc_plane_state *state =
drm_plane_state_to_atmel_hlcdc_plane_state(s);
- const struct atmel_hlcdc_layer_cfg_layout *layout =
- &plane->layer.desc->layout;
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
struct drm_framebuffer *fb = state->base.fb;
const struct drm_display_mode *mode;
struct drm_crtc_state *crtc_state;
@@ -622,7 +621,7 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
state->src_h >>= 16;
state->nplanes = drm_format_num_planes(fb->pixel_format);
- if (state->nplanes > ATMEL_HLCDC_MAX_PLANES)
+ if (state->nplanes > ATMEL_HLCDC_LAYER_MAX_PLANES)
return -EINVAL;
/*
@@ -726,21 +725,19 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
state->crtc_w = patched_crtc_w;
state->crtc_h = patched_crtc_h;
- if (!layout->size &&
+ if (!desc->layout.size &&
(mode->hdisplay != state->crtc_w ||
mode->vdisplay != state->crtc_h))
return -EINVAL;
- if (plane->layer.desc->max_height &&
- state->crtc_h > plane->layer.desc->max_height)
+ if (desc->max_height && state->crtc_h > desc->max_height)
return -EINVAL;
- if (plane->layer.desc->max_width &&
- state->crtc_w > plane->layer.desc->max_width)
+ if (desc->max_width && state->crtc_w > desc->max_width)
return -EINVAL;
if ((state->crtc_h != state->src_h || state->crtc_w != state->src_w) &&
- (!layout->memsize ||
+ (!desc->layout.memsize ||
atmel_hlcdc_format_embeds_alpha(state->base.fb->pixel_format)))
return -EINVAL;
@@ -754,65 +751,13 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
return 0;
}
-static int atmel_hlcdc_plane_prepare_fb(struct drm_plane *p,
- struct drm_plane_state *new_state)
-{
- /*
- * FIXME: we should avoid this const -> non-const cast but it's
- * currently the only solution we have to modify the ->prepared
- * state and rollback the update request.
- * Ideally, we should rework the code to attach all the resources
- * to atmel_hlcdc_plane_state (including the DMA desc allocation),
- * but this require a complete rework of the atmel_hlcdc_layer
- * code.
- */
- struct drm_plane_state *s = (struct drm_plane_state *)new_state;
- struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
- struct atmel_hlcdc_plane_state *state =
- drm_plane_state_to_atmel_hlcdc_plane_state(s);
- int ret;
-
- ret = atmel_hlcdc_layer_update_start(&plane->layer);
- if (!ret)
- state->prepared = true;
-
- return ret;
-}
-
-static void atmel_hlcdc_plane_cleanup_fb(struct drm_plane *p,
- struct drm_plane_state *old_state)
-{
- /*
- * FIXME: we should avoid this const -> non-const cast but it's
- * currently the only solution we have to modify the ->prepared
- * state and rollback the update request.
- * Ideally, we should rework the code to attach all the resources
- * to atmel_hlcdc_plane_state (including the DMA desc allocation),
- * but this require a complete rework of the atmel_hlcdc_layer
- * code.
- */
- struct drm_plane_state *s = (struct drm_plane_state *)old_state;
- struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
- struct atmel_hlcdc_plane_state *state =
- drm_plane_state_to_atmel_hlcdc_plane_state(s);
-
- /*
- * The Request has already been applied or cancelled, nothing to do
- * here.
- */
- if (!state->prepared)
- return;
-
- atmel_hlcdc_layer_update_rollback(&plane->layer);
- state->prepared = false;
-}
-
static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
struct drm_plane_state *old_s)
{
struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
struct atmel_hlcdc_plane_state *state =
drm_plane_state_to_atmel_hlcdc_plane_state(p->state);
+ u32 sr;
if (!p->state->crtc || !p->state->fb)
return;
@@ -823,7 +768,18 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
atmel_hlcdc_plane_update_buffers(plane, state);
atmel_hlcdc_plane_update_disc_area(plane, state);
- atmel_hlcdc_layer_update_commit(&plane->layer);
+ /* Enable the overrun interrupts. */
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
+ ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
+ ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
+ ATMEL_HLCDC_LAYER_OVR_IRQ(2));
+
+ /* Apply the new config at the next SOF event. */
+ sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
+ ATMEL_HLCDC_LAYER_UPDATE |
+ (sr & ATMEL_HLCDC_LAYER_EN ?
+ ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
}
static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
@@ -831,7 +787,18 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
{
struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
- atmel_hlcdc_layer_disable(&plane->layer);
+ /* Disable interrupts */
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR,
+ 0xffffffff);
+
+ /* Disable the layer */
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHDR,
+ ATMEL_HLCDC_LAYER_RST |
+ ATMEL_HLCDC_LAYER_A2Q |
+ ATMEL_HLCDC_LAYER_UPDATE);
+
+ /* Clear all pending interrupts */
+ atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
}
static void atmel_hlcdc_plane_destroy(struct drm_plane *p)
@@ -841,10 +808,7 @@ static void atmel_hlcdc_plane_destroy(struct drm_plane *p)
if (plane->base.fb)
drm_framebuffer_unreference(plane->base.fb);
- atmel_hlcdc_layer_cleanup(p->dev, &plane->layer);
-
drm_plane_cleanup(p);
- devm_kfree(p->dev->dev, plane);
}
static int atmel_hlcdc_plane_atomic_set_property(struct drm_plane *p,
@@ -884,24 +848,15 @@ static int atmel_hlcdc_plane_atomic_get_property(struct drm_plane *p,
}
static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane,
- const struct atmel_hlcdc_layer_desc *desc,
- struct atmel_hlcdc_plane_properties *props)
+ struct atmel_hlcdc_plane_properties *props)
{
- struct regmap *regmap = plane->layer.hlcdc->regmap;
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
- desc->type == ATMEL_HLCDC_CURSOR_LAYER) {
+ desc->type == ATMEL_HLCDC_CURSOR_LAYER)
drm_object_attach_property(&plane->base.base,
props->alpha, 255);
- /* Set default alpha value */
- regmap_update_bits(regmap,
- desc->regs_offset +
- ATMEL_HLCDC_LAYER_GENERAL_CFG(&plane->layer),
- ATMEL_HLCDC_LAYER_GA_MASK,
- ATMEL_HLCDC_LAYER_GA_MASK);
- }
-
if (desc->layout.xstride && desc->layout.pstride) {
int ret;
@@ -920,31 +875,78 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane,
* TODO: decare a "yuv-to-rgb-conv-factors" property to let
* userspace modify these factors (using a BLOB property ?).
*/
- regmap_write(regmap,
- desc->regs_offset +
- ATMEL_HLCDC_LAYER_CSC_CFG(&plane->layer, 0),
- 0x4c900091);
- regmap_write(regmap,
- desc->regs_offset +
- ATMEL_HLCDC_LAYER_CSC_CFG(&plane->layer, 1),
- 0x7a5f5090);
- regmap_write(regmap,
- desc->regs_offset +
- ATMEL_HLCDC_LAYER_CSC_CFG(&plane->layer, 2),
- 0x40040890);
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.csc,
+ 0x4c900091);
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.csc + 1,
+ 0x7a5f5090);
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.csc + 2,
+ 0x40040890);
}
return 0;
}
+void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
+{
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ u32 isr;
+
+ isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
+
+ /*
+ * There's not much we can do in case of overrun except informing
+ * the user. However, we are in interrupt context here, hence the
+ * use of dev_dbg().
+ */
+ if (isr &
+ (ATMEL_HLCDC_LAYER_OVR_IRQ(0) | ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
+ ATMEL_HLCDC_LAYER_OVR_IRQ(2)))
+ dev_dbg(plane->base.dev->dev, "overrun on plane %s\n",
+ desc->name);
+}
+
static struct drm_plane_helper_funcs atmel_hlcdc_layer_plane_helper_funcs = {
- .prepare_fb = atmel_hlcdc_plane_prepare_fb,
- .cleanup_fb = atmel_hlcdc_plane_cleanup_fb,
.atomic_check = atmel_hlcdc_plane_atomic_check,
.atomic_update = atmel_hlcdc_plane_atomic_update,
.atomic_disable = atmel_hlcdc_plane_atomic_disable,
};
+static int atmel_hlcdc_plane_alloc_dscrs(struct drm_plane *p,
+ struct atmel_hlcdc_plane_state *state)
+{
+ struct atmel_hlcdc_dc *dc = p->dev->dev_private;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(state->dscrs); i++) {
+ struct atmel_hlcdc_dma_channel_dscr *dscr;
+ dma_addr_t dscr_dma;
+
+ dscr = dma_pool_alloc(dc->dscrpool, GFP_KERNEL, &dscr_dma);
+ if (!dscr)
+ goto err;
+
+ dscr->addr = 0;
+ dscr->next = dscr_dma;
+ dscr->self = dscr_dma;
+ dscr->ctrl = ATMEL_HLCDC_LAYER_DFETCH;
+
+ state->dscrs[i] = dscr;
+ }
+
+ return 0;
+
+err:
+ for (i--; i >= 0; i--) {
+ dma_pool_free(dc->dscrpool, state->dscrs[i],
+ state->dscrs[i]->self);
+ }
+
+ return -ENOMEM;
+}
+
static void atmel_hlcdc_plane_reset(struct drm_plane *p)
{
struct atmel_hlcdc_plane_state *state;
@@ -961,6 +963,13 @@ static void atmel_hlcdc_plane_reset(struct drm_plane *p)
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (state) {
+ if (atmel_hlcdc_plane_alloc_dscrs(p, state)) {
+ kfree(state);
+ dev_err(p->dev->dev,
+ "Failed to allocate initial plane state\n");
+ return;
+ }
+
state->alpha = 255;
p->state = &state->base;
p->state->plane = p;
@@ -978,8 +987,10 @@ atmel_hlcdc_plane_atomic_duplicate_state(struct drm_plane *p)
if (!copy)
return NULL;
- copy->disc_updated = false;
- copy->prepared = false;
+ if (atmel_hlcdc_plane_alloc_dscrs(p, copy)) {
+ kfree(copy);
+ return NULL;
+ }
if (copy->base.fb)
drm_framebuffer_reference(copy->base.fb);
@@ -987,11 +998,18 @@ atmel_hlcdc_plane_atomic_duplicate_state(struct drm_plane *p)
return ©->base;
}
-static void atmel_hlcdc_plane_atomic_destroy_state(struct drm_plane *plane,
+static void atmel_hlcdc_plane_atomic_destroy_state(struct drm_plane *p,
struct drm_plane_state *s)
{
struct atmel_hlcdc_plane_state *state =
drm_plane_state_to_atmel_hlcdc_plane_state(s);
+ struct atmel_hlcdc_dc *dc = p->dev->dev_private;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(state->dscrs); i++) {
+ dma_pool_free(dc->dscrpool, state->dscrs[i],
+ state->dscrs[i]->self);
+ }
if (s->fb)
drm_framebuffer_unreference(s->fb);
@@ -1011,22 +1029,21 @@ static struct drm_plane_funcs layer_plane_funcs = {
.atomic_get_property = atmel_hlcdc_plane_atomic_get_property,
};
-static struct atmel_hlcdc_plane *
-atmel_hlcdc_plane_create(struct drm_device *dev,
- const struct atmel_hlcdc_layer_desc *desc,
- struct atmel_hlcdc_plane_properties *props)
+static int atmel_hlcdc_plane_create(struct drm_device *dev,
+ const struct atmel_hlcdc_layer_desc *desc,
+ struct atmel_hlcdc_plane_properties *props)
{
+ struct atmel_hlcdc_dc *dc = dev->dev_private;
struct atmel_hlcdc_plane *plane;
enum drm_plane_type type;
int ret;
plane = devm_kzalloc(dev->dev, sizeof(*plane), GFP_KERNEL);
if (!plane)
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;
- ret = atmel_hlcdc_layer_init(dev, &plane->layer, desc);
- if (ret)
- return ERR_PTR(ret);
+ atmel_hlcdc_layer_init(&plane->layer, desc, dc->hlcdc->regmap);
+ plane->properties = props;
if (desc->type == ATMEL_HLCDC_BASE_LAYER)
type = DRM_PLANE_TYPE_PRIMARY;
@@ -1040,17 +1057,19 @@ atmel_hlcdc_plane_create(struct drm_device *dev,
desc->formats->formats,
desc->formats->nformats, type, NULL);
if (ret)
- return ERR_PTR(ret);
+ return ret;
drm_plane_helper_add(&plane->base,
&atmel_hlcdc_layer_plane_helper_funcs);
/* Set default property values*/
- ret = atmel_hlcdc_plane_init_properties(plane, desc, props);
+ ret = atmel_hlcdc_plane_init_properties(plane, props);
if (ret)
- return ERR_PTR(ret);
+ return ret;
+
+ dc->layers[desc->id] = &plane->layer;
- return plane;
+ return 0;
}
static struct atmel_hlcdc_plane_properties *
@@ -1069,72 +1088,34 @@ atmel_hlcdc_plane_create_properties(struct drm_device *dev)
return props;
}
-struct atmel_hlcdc_planes *
-atmel_hlcdc_create_planes(struct drm_device *dev)
+int atmel_hlcdc_create_planes(struct drm_device *dev)
{
struct atmel_hlcdc_dc *dc = dev->dev_private;
struct atmel_hlcdc_plane_properties *props;
- struct atmel_hlcdc_planes *planes;
const struct atmel_hlcdc_layer_desc *descs = dc->desc->layers;
int nlayers = dc->desc->nlayers;
- int i;
-
- planes = devm_kzalloc(dev->dev, sizeof(*planes), GFP_KERNEL);
- if (!planes)
- return ERR_PTR(-ENOMEM);
-
- for (i = 0; i < nlayers; i++) {
- if (descs[i].type == ATMEL_HLCDC_OVERLAY_LAYER)
- planes->noverlays++;
- }
-
- if (planes->noverlays) {
- planes->overlays = devm_kzalloc(dev->dev,
- planes->noverlays *
- sizeof(*planes->overlays),
- GFP_KERNEL);
- if (!planes->overlays)
- return ERR_PTR(-ENOMEM);
- }
+ int i, ret;
props = atmel_hlcdc_plane_create_properties(dev);
if (IS_ERR(props))
- return ERR_CAST(props);
+ return PTR_ERR(props);
- planes->noverlays = 0;
- for (i = 0; i < nlayers; i++) {
- struct atmel_hlcdc_plane *plane;
+ dc->dscrpool = dmam_pool_create("atmel-hlcdc-dscr", dev->dev,
+ sizeof(struct atmel_hlcdc_dma_channel_dscr),
+ sizeof(u64), 0);
+ if (!dc->dscrpool)
+ return -ENOMEM;
- if (descs[i].type == ATMEL_HLCDC_PP_LAYER)
+ for (i = 0; i < nlayers; i++) {
+ if (descs[i].type != ATMEL_HLCDC_BASE_LAYER &&
+ descs[i].type != ATMEL_HLCDC_OVERLAY_LAYER &&
+ descs[i].type != ATMEL_HLCDC_CURSOR_LAYER)
continue;
- plane = atmel_hlcdc_plane_create(dev, &descs[i], props);
- if (IS_ERR(plane))
- return ERR_CAST(plane);
-
- plane->properties = props;
-
- switch (descs[i].type) {
- case ATMEL_HLCDC_BASE_LAYER:
- if (planes->primary)
- return ERR_PTR(-EINVAL);
- planes->primary = plane;
- break;
-
- case ATMEL_HLCDC_OVERLAY_LAYER:
- planes->overlays[planes->noverlays++] = plane;
- break;
-
- case ATMEL_HLCDC_CURSOR_LAYER:
- if (planes->cursor)
- return ERR_PTR(-EINVAL);
- planes->cursor = plane;
- break;
-
- default:
- break;
- }
+ ret = atmel_hlcdc_plane_create(dev, &descs[i], props);
+ if (ret)
+ return ret;
}
- return planes;
+ return 0;
}
--
2.7.4
More information about the dri-devel
mailing list