[PATCH v3 1/2] drm/fb-helper: Add multi buffer support for cma fbdev

[Maxime Ripard]

From: Xinliang Liu <xinliang.liu at linaro.org>

This patch add a config to support to create multi buffer for cma fbdev.
Such as double buffer and triple buffer.

Cma fbdev is convient to add a legency fbdev. And still many Android
devices use fbdev now and at least double buffer is needed for these
Android devices, so that a buffer flip can be operated. It will need
some time for Android device vendors to abondon legency fbdev. So multi
buffer for fbdev is needed.

Signed-off-by: Xinliang Liu <xinliang.liu at linaro.org>
[s.christ at phytec.de: Picking patch from
                     https://lkml.org/lkml/2015/9/14/188]
Signed-off-by: Stefan Christ <s.christ at phytec.de>
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 drivers/gpu/drm/Kconfig         |  9 +++++++++
 drivers/gpu/drm/drm_fb_helper.c | 10 ++++++++++
 2 files changed, 19 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index ebfe8404c25f..700c8b8e57a9 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -84,6 +84,15 @@ config DRM_FBDEV_EMULATION
 
 	  If in doubt, say "Y".
 
+config DRM_FBDEV_OVERALLOC
+	int "Overallocation of the fbdev buffer"
+	depends on DRM_FBDEV_EMULATION
+	default 100
+	help
+	  Defines the fbdev buffer overallocation in percent. Default
+	  is 100. Typical values for double buffering will be 200,
+	  triple buffering 300.
+
 config DRM_LOAD_EDID_FIRMWARE
 	bool "Allow to specify an EDID data set instead of probing for it"
 	depends on DRM_KMS_HELPER
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index e934b541feea..c6de87abaca8 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -48,6 +48,12 @@ module_param_named(fbdev_emulation, drm_fbdev_emulation, bool, 0600);
 MODULE_PARM_DESC(fbdev_emulation,
 		 "Enable legacy fbdev emulation [default=true]");
 
+static int drm_fbdev_overalloc = CONFIG_DRM_FBDEV_OVERALLOC;
+module_param(drm_fbdev_overalloc, int, 0444);
+MODULE_PARM_DESC(drm_fbdev_overalloc,
+		 "Overallocation of the fbdev buffer (%) [default="
+		 __MODULE_STRING(CONFIG_DRM_FBDEV_OVERALLOC) "]");
+
 static LIST_HEAD(kernel_fb_helper_list);
 static DEFINE_MUTEX(kernel_fb_helper_lock);
 
@@ -1573,6 +1579,10 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
 		sizes.fb_height = sizes.surface_height = 768;
 	}
 
+	/* Handle our overallocation */
+	sizes.surface_height *= drm_fbdev_overalloc;
+	sizes.surface_height /= 100;
+
 	/* push down into drivers */
 	ret = (*fb_helper->funcs->fb_probe)(fb_helper, &sizes);
 	if (ret < 0)
-- 
git-series 0.8.11