Hi John
On 02/15/2017 08:39 PM, John Keeping wrote:
> On Wed, 15 Feb 2017 11:38:45 +0800, Chris Zhong wrote:
>
>> On 01/29/2017 09:24 PM, John Keeping wrote:
>>> In order to fully reset the state of the MIPI controller we must assert
>>> this reset.
>>>
>>> This is slightly more complicated than it could be in order to maintain
>>> compatibility with device trees that do not specify the reset property.
>>>
>>> Signed-off-by: John Keeping <john at metanate.com>
>>> Reviewed-by: Chris Zhong <zyw at rock-chips.com>
>>> ---
>>> v3:
>>> - Add Chris' Reviewed-by
>>> Unchanged in v2
>>>
>>> drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 30 ++++++++++++++++++++++++++++++
>>> 1 file changed, 30 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>>> index 58cb8ace2fe8..cf3ca6b0cbdb 100644
>>> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>>> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>>> @@ -13,6 +13,7 @@
>>> #include <linux/module.h>
>>> #include <linux/of_device.h>
>>> #include <linux/regmap.h>
>>> +#include <linux/reset.h>
>>> #include <linux/mfd/syscon.h>
>>> #include <drm/drm_atomic_helper.h>
>>> #include <drm/drm_crtc.h>
>>> @@ -1124,6 +1125,7 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
>>> of_match_device(dw_mipi_dsi_dt_ids, dev);
>>> const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
>>> struct platform_device *pdev = to_platform_device(dev);
>>> + struct reset_control *apb_rst;
>>> struct drm_device *drm = data;
>>> struct dw_mipi_dsi *dsi;
>>> struct resource *res;
>>> @@ -1162,6 +1164,34 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
>>> return ret;
>>> }
>>>
>>> + /*
>>> + * Note that the reset was not defined in the initial device tree, so
>>> + * we have to be prepared for it not being found.
>>> + */
>>> + apb_rst = devm_reset_control_get(dev, "apb");
>>> + if (IS_ERR(apb_rst)) {
>>> + if (PTR_ERR(apb_rst) == -ENODEV) {
>> According to [0], I think it should be -ENOENT here.
> Nice catch, I'll fix this.
>
>> [0]
>> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=3d81216fde465e76c5eae98f61d3666163634395
>>
>> commit 3d81216fde465e76c5eae98f61d3666163634395
>> Author: Alban Bedel <albeu at free.fr>
>> Date: Tue Sep 1 17:28:31 2015 +0200
>>
>> reset: Fix of_reset_control_get() for consistent return values
>>
>> When of_reset_control_get() is called without connection ID it returns
>> -ENOENT when the 'resets' property doesn't exists or is an empty entry.
>> However when a connection ID is given it returns -EINVAL when the
>> 'resets'
>> property doesn't exists or the requested name can't be found. This is
>> because the error code returned by of_property_match_string() is just
>> passed down as an index to of_parse_phandle_with_args(), which then
>> returns -EINVAL.
>>
>> To get a consistent return value with both code paths we must return
>> -ENOENT when of_property_match_string() fails.
>>
>> Signed-off-by: Alban Bedel <albeu at free.fr>
>> Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
>>
>>
>>> + apb_rst = NULL;
>>> + } else {
>>> + dev_err(dev, "Unable to get reset control: %d\n", ret);
Also, we can not get error number from "ret" here.
>>> + return PTR_ERR(apb_rst);
>>> + }
>>> + }
>>> +
>>> + if (apb_rst) {
>>> + ret = clk_prepare_enable(dsi->pclk);
>>> + if (ret) {
>>> + dev_err(dev, "%s: Failed to enable pclk\n", __func__);
>>> + return ret;
>>> + }
>>> +
>>> + reset_control_assert(apb_rst);
>>> + usleep_range(10, 20);
>>> + reset_control_deassert(apb_rst);
>>> +
>>> + clk_disable_unprepare(dsi->pclk);
>>> + }
>>> +
>>> ret = clk_prepare_enable(dsi->pllref_clk);
>>> if (ret) {
>>> dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
>>
>
>