[Bug 194645] amdgpu: amdgpu_resume failed

Tue Feb 21 18:09:36 UTC 2017

https://bugzilla.kernel.org/show_bug.cgi?id=194645

--- Comment #9 from Mateusz Lenik (mlen at mlen.pl) ---
I retried it with x11 drivers build for 4.9.11, it still crashes

[   64.460823] suspend debug: Waiting for 5 second(s).
[   69.490160] sd 2:0:0:0: [sda] Starting disk
[   69.490214] sd 4:0:0:0: [sdb] Starting disk
[   69.490280] sd 5:0:0:0: [sdc] Starting disk
[   69.491999] power_meter ACPI000D:00: Found ACPI power meter.
[   69.492179] rtc_cmos 00:00: System wakeup disabled by ACPI
[   69.493742] serial 00:03: activated
[   69.495145] serial 00:04: activated
[   69.502637] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[   69.502808] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
[   69.527164] [drm] PCIE GART of 8192M enabled (table at 0x0000000000040000).
[   69.530900] DPM is already running
[   69.540893] [drm] ring test on 0 succeeded in 14 usecs
[   69.561779] igb 0000:05:00.0 enp5s0: igb: enp5s0 NIC Link is Up 1000 Mbps
Full Duplex, Flow Control: RX
[   69.806059] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   69.806089] ata1: SATA link down (SStatus 0 SControl 300)
[   69.806109] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   69.806129] ata2: SATA link down (SStatus 0 SControl 300)
[   69.807977] ata3.00: supports DRM functions and may not be fully accessible
[   69.810946] ata4.00: configured for UDMA/100
[   69.812759] ata3.00: disabling queued TRIM support
[   69.813020] ata3.00: supports DRM functions and may not be fully accessible
[   69.814376] ata8: SATA link down (SStatus 0 SControl 300)
[   69.814392] ata7: SATA link down (SStatus 0 SControl 300)
[   69.814410] ata10: SATA link down (SStatus 0 SControl 300)
[   69.814427] ata9: SATA link down (SStatus 0 SControl 300)
[   69.814445] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   69.814478] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   69.817823] ata3.00: disabling queued TRIM support
[   69.817890] ata3.00: configured for UDMA/133
[   70.862372] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 1 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   71.007943] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 2 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   71.153518] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 3 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   71.299093] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 4 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   71.444670] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 5 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   71.590256] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 6 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   71.735830] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 7 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   71.881433] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 8 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   71.988538] [drm:sdma_v3_0_ring_test_ring] *ERROR* amdgpu: ring 9 test
failed (0xCAFEDEAD)
[   71.988543] [drm:amdgpu_resume] *ERROR* resume of IP block <sdma_v3_0>
failed -22
[   71.988546] [drm:amdgpu_device_resume] *ERROR* amdgpu_resume failed (-22).
[   73.031518] [drm:gfx_v8_0_ring_test_ib] *ERROR* amdgpu: IB test timed out.
[   73.031523] [drm:amdgpu_ib_ring_tests] *ERROR* amdgpu: failed testing IB on
GFX ring (-110).
[   73.031525] [drm:amdgpu_device_resume] *ERROR* ib ring test failed (-110).
[   73.061223] [drm] PCIE GART of 8192M enabled (table at 0x0000000000040000).
[   73.064209] DPM is already running
[   73.074176] [drm] ring test on 0 succeeded in 14 usecs
[   74.428386] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 1 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   74.578515] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 2 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   74.728630] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 3 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   74.878757] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 4 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   74.951465] ata6.00: qc timeout (cmd 0x27)
[   74.951473] ata6.00: failed to read native max address (err_mask=0x4)
[   74.951474] ata6.00: HPA support seems broken, skipping HPA handling
[   74.951475] ata6.00: revalidation failed (errno=-5)
[   74.951485] ata5.00: qc timeout (cmd 0x27)
[   74.951491] ata5.00: failed to read native max address (err_mask=0x4)
[   74.951492] ata5.00: HPA support seems broken, skipping HPA handling
[   74.951493] ata5.00: revalidation failed (errno=-5)
[   75.028962] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 5 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   75.179242] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 6 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   75.261502] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   75.261522] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   75.330302] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 7 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   75.480460] [drm:gfx_v8_0_ring_test_ring] *ERROR* amdgpu: ring 8 test failed
(scratch(0xC040)=0xCAFEDEAD)
[   75.590842] [drm:sdma_v3_0_ring_test_ring] *ERROR* amdgpu: ring 9 test
failed (0xCAFEDEAD)
[   75.590845] [drm:amdgpu_resume] *ERROR* resume of IP block <sdma_v3_0>
failed -22
[   75.590847] [drm:amdgpu_device_resume] *ERROR* amdgpu_resume failed (-22).
[   76.615310] [drm:gfx_v8_0_ring_test_ib] *ERROR* amdgpu: IB test timed out.
[   76.615314] [drm:amdgpu_ib_ring_tests] *ERROR* amdgpu: failed testing IB on
GFX ring (-110).
[   76.615316] [drm:amdgpu_device_resume] *ERROR* ib ring test failed (-110).
[   76.617239] amdgpu 0000:02:00.0: ffff94d7cbbd6000 pin failed
[   78.315987] ata5.00: configured for UDMA/133
[   78.343296] ata6.00: configured for UDMA/133
[   78.366810] PM: resume of devices complete after 8878.648 msecs
[   78.387537] PM: Finishing wakeup.
[   78.387538] Restarting tasks ... done.

-- 
You are receiving this mail because:
You are watching the assignee of the bug.