[PATCH 02/10] drm/i915/psr: program vsc header for psr2

Jim Bride jim.bride at linux.intel.com
Wed Jan 4 23:46:39 UTC 2017


On Mon, Jan 02, 2017 at 05:00:55PM +0530, vathsala nagaraju wrote:
> Function hsw_psr_setup handles vsc header setup for psr1 and
> skl_psr_setup_vsc handles vsc header setup for psr2.
> 
> Setup VSC header in function skl_psr_setup_vsc for psr2 support,
> as per edp 1.4 spec, table 6-11:VSC SDP HEADER Extension for psr2
> operation.
> 
> v2: (Jani)
> - Initialize variables to 0
> - intel_dp_get_y_cord_status and intel_dp_get_y_cord_status made static
> - Correct indentation for continuation lines
> - Change DP_PSR_Y_COORDINATE to  DP_PSR2_SU_Y_COORDINATE_REQUIRED
> - Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX_*
> - Change VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED to DP_VSC_*
> 
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Cc: Jim Bride <jim.bride at linux.intel.com>
> Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju at intel.com>
> Signed-off-by: Patil Deepti <deepti.patil at intel.com>

Reviewed-by: Jim Bride <jim.bride at linux.intel.com>

> ---
>  drivers/gpu/drm/i915/i915_drv.h  |  2 ++
>  drivers/gpu/drm/i915/intel_dp.c  | 26 ++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_psr.c | 17 +++++++++++++++--
>  3 files changed, 43 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 22d3f61..36dc835 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1164,6 +1164,8 @@ struct i915_psr {
>  	bool psr2_support;
>  	bool aux_frame_sync;
>  	bool link_standby;
> +	bool y_cord_support;
> +	bool colorimetry_support;
>  };
>  
>  enum intel_pch {
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index fb12896..da577c9 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3042,6 +3042,24 @@ static void chv_dp_post_pll_disable(struct intel_encoder *encoder,
>  				DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE;
>  }
>  
> +static bool intel_dp_get_y_cord_status(struct intel_dp *intel_dp)
> +{
> +	uint8_t psr_caps = 0;
> +
> +	drm_dp_dpcd_readb(&intel_dp->aux, DP_PSR_CAPS, &psr_caps);
> +	return psr_caps & DP_PSR2_SU_Y_COORDINATE_REQUIRED;
> +}
> +
> +static bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp)
> +{
> +	uint8_t dprx = 0;
> +
> +	drm_dp_dpcd_readb(&intel_dp->aux,
> +			DP_DPRX_FEATURE_ENUMERATION_LIST,
> +			&dprx);
> +	return dprx & DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED;
> +}
> +
>  /* These are source-specific values. */
>  uint8_t
>  intel_dp_voltage_max(struct intel_dp *intel_dp)
> @@ -3620,6 +3638,14 @@ void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
>  		dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
>  		DRM_DEBUG_KMS("PSR2 %s on sink",
>  			      dev_priv->psr.psr2_support ? "supported" : "not supported");
> +
> +		if (dev_priv->psr.psr2_support) {
> +			dev_priv->psr.y_cord_support =
> +				intel_dp_get_y_cord_status(intel_dp);
> +			dev_priv->psr.colorimetry_support =
> +				intel_dp_get_colorimetry_status(intel_dp);
> +		}
> +
>  	}
>  
>  	/* Read the eDP Display control capabilities registers */
> diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> index 6aca8ff..c3aa649 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -122,13 +122,26 @@ static void vlv_psr_setup_vsc(struct intel_dp *intel_dp)
>  static void skl_psr_setup_su_vsc(struct intel_dp *intel_dp)
>  {
>  	struct edp_vsc_psr psr_vsc;
> +	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> +	struct drm_device *dev = intel_dig_port->base.base.dev;
> +	struct drm_i915_private *dev_priv = to_i915(dev);
>  
>  	/* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
>  	memset(&psr_vsc, 0, sizeof(psr_vsc));
>  	psr_vsc.sdp_header.HB0 = 0;
>  	psr_vsc.sdp_header.HB1 = 0x7;
> -	psr_vsc.sdp_header.HB2 = 0x3;
> -	psr_vsc.sdp_header.HB3 = 0xb;
> +	if (dev_priv->psr.colorimetry_support &&
> +		dev_priv->psr.y_cord_support) {
> +		psr_vsc.sdp_header.HB2 = 0x5;
> +		psr_vsc.sdp_header.HB3 = 0x13;
> +	} else if (dev_priv->psr.y_cord_support) {
> +		psr_vsc.sdp_header.HB2 = 0x4;
> +		psr_vsc.sdp_header.HB3 = 0xe;
> +	} else {
> +		psr_vsc.sdp_header.HB2 = 0x3;
> +		psr_vsc.sdp_header.HB3 = 0xc;
> +	}
> +
>  	intel_psr_write_vsc(intel_dp, &psr_vsc);
>  }
>  
> -- 
> 1.9.1


More information about the dri-devel mailing list