[PATCH v3 2/3] drm: zte: add .atomic_disable hook to disable graphic layer

Sean Paul seanpaul at chromium.org
Thu Jan 5 07:26:45 UTC 2017


On Wed, Dec 28, 2016 at 9:37 PM, Shawn Guo <shawnguo at kernel.org> wrote:
> From: Shawn Guo <shawn.guo at linaro.org>
>
> There are a few hardware bits for each graphic layer to control main/aux
> channel and clock selection, as well as the layer enabling.  These bits
> sit outside the layer block itself, but in VOU control glue block.  We
> currently set these bits up at CRTC initialization for once, and do not
> support disabling the layer.
>
> This patch creates a pair of functions zx_vou_layer_enable[disable] to
> be invoked from plane hooks .atomic_update and .atomic_disable to set up
> and tear down the layer.  This is generic for both graphic and video
> layers, so it will make the overlay plane support to be added later much
> easier.
>

This feels ever so slightly awkward since the plane is calling back to
the crtc in enable/disable, but i suppose this is a byproduct of
defining the atomic plane hooks in zx_plane. I think we just need to
be careful not to introduce more of these cross-block/file
dependencies, as that might signify that zx_plane should be merged
into zx_vou. At the moment, I feel like this is fine, so,

Reviewed-by: Sean Paul <seanpaul at chromium.org>


> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> ---
>  drivers/gpu/drm/zte/zx_plane.c | 15 +++++++++
>  drivers/gpu/drm/zte/zx_plane.h |  1 +
>  drivers/gpu/drm/zte/zx_vou.c   | 70 ++++++++++++++++++++++++++++++------------
>  drivers/gpu/drm/zte/zx_vou.h   |  3 ++
>  4 files changed, 69 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/zte/zx_plane.c b/drivers/gpu/drm/zte/zx_plane.c
> index 78d29b1db91c..5445eebf830f 100644
> --- a/drivers/gpu/drm/zte/zx_plane.c
> +++ b/drivers/gpu/drm/zte/zx_plane.c
> @@ -197,12 +197,27 @@ static void zx_gl_plane_atomic_update(struct drm_plane *plane,
>         /* Enable HBSC block */
>         zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, HBSC_CTRL_EN);
>
> +       zx_vou_layer_enable(plane);
> +
>         zx_gl_set_update(zplane);
>  }
>
> +static void zx_plane_atomic_disable(struct drm_plane *plane,
> +                                   struct drm_plane_state *old_state)
> +{
> +       struct zx_plane *zplane = to_zx_plane(plane);
> +       void __iomem *hbsc = zplane->hbsc;
> +
> +       zx_vou_layer_disable(plane);
> +
> +       /* Disable HBSC block */
> +       zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, 0);
> +}
> +
>  static const struct drm_plane_helper_funcs zx_gl_plane_helper_funcs = {
>         .atomic_check = zx_gl_plane_atomic_check,
>         .atomic_update = zx_gl_plane_atomic_update,
> +       .atomic_disable = zx_plane_atomic_disable,
>  };
>
>  static void zx_plane_destroy(struct drm_plane *plane)
> diff --git a/drivers/gpu/drm/zte/zx_plane.h b/drivers/gpu/drm/zte/zx_plane.h
> index 264a92e0b532..933611ddffd0 100644
> --- a/drivers/gpu/drm/zte/zx_plane.h
> +++ b/drivers/gpu/drm/zte/zx_plane.h
> @@ -18,6 +18,7 @@ struct zx_plane {
>         void __iomem *csc;
>         void __iomem *hbsc;
>         void __iomem *rsz;
> +       const struct vou_layer_bits *bits;
>  };
>
>  #define to_zx_plane(plane) container_of(plane, struct zx_plane, plane)
> diff --git a/drivers/gpu/drm/zte/zx_vou.c b/drivers/gpu/drm/zte/zx_vou.c
> index d5c801f6f97b..3fb4fc04e693 100644
> --- a/drivers/gpu/drm/zte/zx_vou.c
> +++ b/drivers/gpu/drm/zte/zx_vou.c
> @@ -65,7 +65,6 @@ struct zx_crtc_bits {
>         u32 polarity_shift;
>         u32 int_frame_mask;
>         u32 tc_enable;
> -       u32 gl_enable;
>  };
>
>  static const struct zx_crtc_bits main_crtc_bits = {
> @@ -73,7 +72,6 @@ struct zx_crtc_bits {
>         .polarity_shift = MAIN_POL_SHIFT,
>         .int_frame_mask = TIMING_INT_MAIN_FRAME,
>         .tc_enable = MAIN_TC_EN,
> -       .gl_enable = OSD_CTRL0_GL0_EN,
>  };
>
>  static const struct zx_crtc_bits aux_crtc_bits = {
> @@ -81,7 +79,6 @@ struct zx_crtc_bits {
>         .polarity_shift = AUX_POL_SHIFT,
>         .int_frame_mask = TIMING_INT_AUX_FRAME,
>         .tc_enable = AUX_TC_EN,
> -       .gl_enable = OSD_CTRL0_GL1_EN,
>  };
>
>  struct zx_crtc {
> @@ -97,6 +94,24 @@ struct zx_crtc {
>
>  #define to_zx_crtc(x) container_of(x, struct zx_crtc, crtc)
>
> +struct vou_layer_bits {
> +       u32 enable;
> +       u32 chnsel;
> +       u32 clksel;
> +};
> +
> +static const struct vou_layer_bits zx_gl_bits[GL_NUM] = {
> +       {
> +               .enable = OSD_CTRL0_GL0_EN,
> +               .chnsel = OSD_CTRL0_GL0_SEL,
> +               .clksel = VOU_CLK_GL0_SEL,
> +       }, {
> +               .enable = OSD_CTRL0_GL1_EN,
> +               .chnsel = OSD_CTRL0_GL1_SEL,
> +               .clksel = VOU_CLK_GL1_SEL,
> +       },
> +};
> +
>  struct zx_vou_hw {
>         struct device *dev;
>         void __iomem *osd;
> @@ -220,10 +235,6 @@ static void zx_crtc_enable(struct drm_crtc *crtc)
>         /* Enable channel */
>         zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, CHN_ENABLE);
>
> -       /* Enable Graphic Layer */
> -       zx_writel_mask(vou->osd + OSD_CTRL0, bits->gl_enable,
> -                      bits->gl_enable);
> -
>         drm_crtc_vblank_on(crtc);
>
>         ret = clk_set_rate(zcrtc->pixclk, mode->clock * 1000);
> @@ -247,9 +258,6 @@ static void zx_crtc_disable(struct drm_crtc *crtc)
>
>         drm_crtc_vblank_off(crtc);
>
> -       /* Disable Graphic Layer */
> -       zx_writel_mask(vou->osd + OSD_CTRL0, bits->gl_enable, 0);
> -
>         /* Disable channel */
>         zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, 0);
>
> @@ -316,6 +324,7 @@ static int zx_crtc_init(struct drm_device *drm, struct zx_vou_hw *vou,
>                 zplane->csc = vou->osd + MAIN_CSC_OFFSET;
>                 zplane->hbsc = vou->osd + MAIN_HBSC_OFFSET;
>                 zplane->rsz = vou->otfppu + MAIN_RSZ_OFFSET;
> +               zplane->bits = &zx_gl_bits[0];
>                 zcrtc->chnreg = vou->osd + OSD_MAIN_CHN;
>                 zcrtc->regs = &main_crtc_regs;
>                 zcrtc->bits = &main_crtc_bits;
> @@ -324,6 +333,7 @@ static int zx_crtc_init(struct drm_device *drm, struct zx_vou_hw *vou,
>                 zplane->csc = vou->osd + AUX_CSC_OFFSET;
>                 zplane->hbsc = vou->osd + AUX_HBSC_OFFSET;
>                 zplane->rsz = vou->otfppu + AUX_RSZ_OFFSET;
> +               zplane->bits = &zx_gl_bits[1];
>                 zcrtc->chnreg = vou->osd + OSD_AUX_CHN;
>                 zcrtc->regs = &aux_crtc_regs;
>                 zcrtc->bits = &aux_crtc_bits;
> @@ -411,6 +421,36 @@ void zx_vou_disable_vblank(struct drm_device *drm, unsigned int pipe)
>                        zcrtc->bits->int_frame_mask, 0);
>  }
>
> +void zx_vou_layer_enable(struct drm_plane *plane)
> +{
> +       struct zx_crtc *zcrtc = to_zx_crtc(plane->state->crtc);
> +       struct zx_vou_hw *vou = zcrtc->vou;
> +       struct zx_plane *zplane = to_zx_plane(plane);
> +       const struct vou_layer_bits *bits = zplane->bits;
> +
> +       if (zcrtc->chn_type == VOU_CHN_MAIN) {
> +               zx_writel_mask(vou->osd + OSD_CTRL0, bits->chnsel, 0);
> +               zx_writel_mask(vou->vouctl + VOU_CLK_SEL, bits->clksel, 0);
> +       } else {
> +               zx_writel_mask(vou->osd + OSD_CTRL0, bits->chnsel,
> +                              bits->chnsel);
> +               zx_writel_mask(vou->vouctl + VOU_CLK_SEL, bits->clksel,
> +                              bits->clksel);
> +       }
> +
> +       zx_writel_mask(vou->osd + OSD_CTRL0, bits->enable, bits->enable);
> +}
> +
> +void zx_vou_layer_disable(struct drm_plane *plane)
> +{
> +       struct zx_crtc *zcrtc = to_zx_crtc(plane->crtc);
> +       struct zx_vou_hw *vou = zcrtc->vou;
> +       struct zx_plane *zplane = to_zx_plane(plane);
> +       const struct vou_layer_bits *bits = zplane->bits;
> +
> +       zx_writel_mask(vou->osd + OSD_CTRL0, bits->enable, 0);
> +}
> +
>  static irqreturn_t vou_irq_handler(int irq, void *dev_id)
>  {
>         struct zx_vou_hw *vou = dev_id;
> @@ -469,19 +509,9 @@ static void vou_dtrc_init(struct zx_vou_hw *vou)
>
>  static void vou_hw_init(struct zx_vou_hw *vou)
>  {
> -       /* Set GL0 to main channel and GL1 to aux channel */
> -       zx_writel_mask(vou->osd + OSD_CTRL0, OSD_CTRL0_GL0_SEL, 0);
> -       zx_writel_mask(vou->osd + OSD_CTRL0, OSD_CTRL0_GL1_SEL,
> -                      OSD_CTRL0_GL1_SEL);
> -
>         /* Release reset for all VOU modules */
>         zx_writel(vou->vouctl + VOU_SOFT_RST, ~0);
>
> -       /* Select main clock for GL0 and aux clock for GL1 module */
> -       zx_writel_mask(vou->vouctl + VOU_CLK_SEL, VOU_CLK_GL0_SEL, 0);
> -       zx_writel_mask(vou->vouctl + VOU_CLK_SEL, VOU_CLK_GL1_SEL,
> -                      VOU_CLK_GL1_SEL);
> -
>         /* Enable clock auto-gating for all VOU modules */
>         zx_writel(vou->vouctl + VOU_CLK_REQEN, ~0);
>
> diff --git a/drivers/gpu/drm/zte/zx_vou.h b/drivers/gpu/drm/zte/zx_vou.h
> index 349e06cd86f4..4b4339be641b 100644
> --- a/drivers/gpu/drm/zte/zx_vou.h
> +++ b/drivers/gpu/drm/zte/zx_vou.h
> @@ -43,4 +43,7 @@ struct vou_inf {
>  int zx_vou_enable_vblank(struct drm_device *drm, unsigned int pipe);
>  void zx_vou_disable_vblank(struct drm_device *drm, unsigned int pipe);
>
> +void zx_vou_layer_enable(struct drm_plane *plane);
> +void zx_vou_layer_disable(struct drm_plane *plane);
> +
>  #endif /* __ZX_VOU_H__ */
> --
> 1.9.1
>



-- 
Sean Paul, Software Engineer, Google / Chromium OS


More information about the dri-devel mailing list