[PATCH 03/10] drm/i915/psr: fix blank screen issue for psr2

Vivi, Rodrigo rodrigo.vivi at intel.com
Mon Jan 9 17:17:03 UTC 2017


On Mon, 2017-01-09 at 18:26 +0530, vathsala nagaraju wrote:
> Psr1 and psr2 are mutually exclusive,ie when psr2 is enabled,
> psr1 should be disabled.When psr2 is exited , bit 31 of reg
> PSR2_CTL must be set to 0 but currently bit 31 of SRD_CTL
> (psr1 control register)is set to 0.
> Also ,PSR2_IDLE state is looked up from SRD_STATUS(psr1 register)
> instead of PSR2_STATUS register, which has wrong data, resulting
> in blankscreen.
> hsw_enable_source is split into hsw_enable_source_psr1 and
> hsw_enable_source_psr2 for easier code review and maintenance,
> as suggested by rodrigo and jim.
> 
> v2: (Rodrigo)
> - Rename hsw_enable_source_psr* to intel_enable_source_psr*
> 
> v3: (Rodrigo)
> - In hsw_psr_disable ,
>   1) for psr active case, handle psr2 followed by psr1.
>   2) psr inactive case, handle psr2 followed by psr1

much better, thanks, but still has one blocking issue imho:

> 
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Cc: Jim Bride <jim.bride at linux.intel.com>
> Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju at intel.com>
> Signed-off-by: Patil Deepti <deepti.patil at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h  |   3 +
>  drivers/gpu/drm/i915/intel_psr.c | 126 +++++++++++++++++++++++++++++----------
>  2 files changed, 97 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 00970aa..7830e6e 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3615,6 +3615,9 @@ enum {
>  #define   EDP_PSR2_FRAME_BEFORE_SU_MASK	(0xf<<4)
>  #define   EDP_PSR2_IDLE_MASK		0xf
>  
> +#define EDP_PSR2_STATUS_CTL            _MMIO(0x6f940)
> +#define EDP_PSR2_STATUS_STATE_MASK     (0xf<<28)
> +
>  /* VGA port control */
>  #define ADPA			_MMIO(0x61100)
>  #define PCH_ADPA                _MMIO(0xe1100)
> diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> index c3aa649..6c161aa 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -261,12 +261,11 @@ static void vlv_psr_activate(struct intel_dp *intel_dp)
>  		   VLV_EDP_PSR_ACTIVE_ENTRY);
>  }
>  
> -static void hsw_psr_enable_source(struct intel_dp *intel_dp)
> +static void intel_enable_source_psr1(struct intel_dp *intel_dp)
>  {
>  	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
>  	struct drm_device *dev = dig_port->base.base.dev;
>  	struct drm_i915_private *dev_priv = to_i915(dev);
> -
>  	uint32_t max_sleep_time = 0x1f;
>  	/*
>  	 * Let's respect VBT in case VBT asks a higher idle_frame value.
> @@ -312,14 +311,30 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
>  		val |= EDP_PSR_TP1_TP2_SEL;
>  
>  	I915_WRITE(EDP_PSR_CTL, val);
> +}
>  
> -	if (!dev_priv->psr.psr2_support)
> -		return;
> +static void intel_enable_source_psr2(struct intel_dp *intel_dp)
> +{
> +	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> +	struct drm_device *dev = dig_port->base.base.dev;
> +	struct drm_i915_private *dev_priv = to_i915(dev);
> +
> +	/*
> +	 * Let's respect VBT in case VBT asks a higher idle_frame value.
> +	 * Let's use 6 as the minimum to cover all known cases including
> +	 * the off-by-one issue that HW has in some cases. Also there are
> +	 * cases where sink should be able to train
> +	 * with the 5 or 6 idle patterns.
> +	 */
> +	uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
> +	uint32_t val = EDP_PSR_ENABLE;
> +
> +	val |= idle_frames << EDP_PSR_IDLE_FRAME_SHIFT;
>  
>  	/* FIXME: selective update is probably totally broken because it doesn't
>  	 * mesh at all with our frontbuffer tracking. And the hw alone isn't
>  	 * good enough. */
> -	val = EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
> +	val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
>  
>  	if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
>  		val |= EDP_PSR2_TP2_TIME_2500;
> @@ -333,6 +348,20 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
>  	I915_WRITE(EDP_PSR2_CTL, val);
>  }
>  
> +
> +static void hsw_psr_enable_source(struct intel_dp *intel_dp)
> +{
> +	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> +	struct drm_device *dev = dig_port->base.base.dev;
> +	struct drm_i915_private *dev_priv = to_i915(dev);
> +
> +	/* psr1 and psr2 are mutually exclusive.*/
> +	if (dev_priv->psr.psr2_support)
> +		intel_enable_source_psr2(intel_dp);
> +	else
> +		intel_enable_source_psr1(intel_dp);
> +}
> +
>  static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
>  {
>  	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> @@ -410,7 +439,10 @@ static void intel_psr_activate(struct intel_dp *intel_dp)
>  	struct drm_device *dev = intel_dig_port->base.base.dev;
>  	struct drm_i915_private *dev_priv = to_i915(dev);
>  
> -	WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
> +	if (dev_priv->psr.psr2_support)
> +		WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
> +	else
> +		WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
>  	WARN_ON(dev_priv->psr.active);
>  	lockdep_assert_held(&dev_priv->psr.lock);
>  
> @@ -462,8 +494,6 @@ void intel_psr_enable(struct intel_dp *intel_dp)
>  	dev_priv->psr.busy_frontbuffer_bits = 0;
>  
>  	if (HAS_DDI(dev_priv)) {
> -		hsw_psr_setup_vsc(intel_dp);
> -
>  		if (dev_priv->psr.psr2_support) {
>  			/* PSR2 is restricted to work with panel resolutions upto 3200x2000 */
>  			if (crtc->config->pipe_src_w > 3200 ||
> @@ -471,8 +501,10 @@ void intel_psr_enable(struct intel_dp *intel_dp)
>  				dev_priv->psr.psr2_support = false;

+			hsw_psr_setup_vsc(intel_dp);

without this you will end up enabling psr1 but not setting up the vsc.


But also if I understood correctly this will fail anyways right?
So before this patch we need one that move this restriction to
match_conditions function returning false and fully blocking PSR.

>  			else
>  				skl_psr_setup_su_vsc(intel_dp);
> +		} else {
> +			/* set up vsc header for psr1 */
> +			hsw_psr_setup_vsc(intel_dp);
>  		}
> -
>  		/*
>  		 * Per Spec: Avoid continuous PSR exit by masking MEMUP and HPD.
>  		 * Also mask LPSP to avoid dependency on other drivers that
> @@ -557,20 +589,35 @@ static void hsw_psr_disable(struct intel_dp *intel_dp)
>  	struct drm_i915_private *dev_priv = to_i915(dev);
>  
>  	if (dev_priv->psr.active) {
> -		I915_WRITE(EDP_PSR_CTL,
> -			   I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
> -
> -		/* Wait till PSR is idle */
> -		if (intel_wait_for_register(dev_priv,
> -					    EDP_PSR_STATUS_CTL,
> -					    EDP_PSR_STATUS_STATE_MASK,
> -					    0,
> -					    2000))
> +		if (dev_priv->psr.psr2_support) {
> +			I915_WRITE(EDP_PSR2_CTL,
> +				I915_READ(EDP_PSR2_CTL) &
> +					~(EDP_PSR2_ENABLE |
> +					EDP_SU_TRACK_ENABLE));
> +			/* Wait till PSR2 is idle */
> +			if (intel_wait_for_register(dev_priv,
> +						    EDP_PSR2_STATUS_CTL,
> +						    EDP_PSR2_STATUS_STATE_MASK,
> +						    0,
> +						    2000))
> +			DRM_ERROR("Timed out waiting for PSR2 Idle State\n");
> +		} else {
> +			I915_WRITE(EDP_PSR_CTL,
> +				   I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
> +			/* Wait till PSR1 is idle */
> +			if (intel_wait_for_register(dev_priv,
> +						    EDP_PSR_STATUS_CTL,
> +						    EDP_PSR_STATUS_STATE_MASK,
> +						    0,
> +						    2000))
>  			DRM_ERROR("Timed out waiting for PSR Idle State\n");
> -
> +		}
>  		dev_priv->psr.active = false;
>  	} else {
> -		WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
> +		if (dev_priv->psr.psr2_support)
> +			WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
> +		else
> +			WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
>  	}
>  }
>  
> @@ -621,13 +668,24 @@ static void intel_psr_work(struct work_struct *work)
>  	 * and be ready for re-enable.
>  	 */
>  	if (HAS_DDI(dev_priv)) {
> -		if (intel_wait_for_register(dev_priv,
> -					    EDP_PSR_STATUS_CTL,
> -					    EDP_PSR_STATUS_STATE_MASK,
> -					    0,
> -					    50)) {
> -			DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
> -			return;
> +		if (dev_priv->psr.psr2_support) {
> +			if (intel_wait_for_register(dev_priv,
> +						EDP_PSR2_STATUS_CTL,
> +						EDP_PSR2_STATUS_STATE_MASK,
> +						0,
> +						50)) {
> +				DRM_ERROR("Timed out waiting for PSR2 Idle for re-enable\n");
> +				return;
> +			}
> +		} else {
> +			if (intel_wait_for_register(dev_priv,
> +						EDP_PSR_STATUS_CTL,
> +						EDP_PSR_STATUS_STATE_MASK,
> +						0,
> +						50)) {
> +				DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
> +				return;
> +			}
>  		}
>  	} else {
>  		if (intel_wait_for_register(dev_priv,
> @@ -669,11 +727,15 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)
>  		return;
>  
>  	if (HAS_DDI(dev_priv)) {
> -		val = I915_READ(EDP_PSR_CTL);
> -
> -		WARN_ON(!(val & EDP_PSR_ENABLE));
> -
> -		I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
> +		if (dev_priv->psr.psr2_support) {
> +			val = I915_READ(EDP_PSR2_CTL);
> +			WARN_ON(!(val & EDP_PSR2_ENABLE));
> +			I915_WRITE(EDP_PSR2_CTL, val & ~EDP_PSR2_ENABLE);
> +		} else {
> +			val = I915_READ(EDP_PSR_CTL);
> +			WARN_ON(!(val & EDP_PSR_ENABLE));
> +			I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
> +		}
>  	} else {
>  		val = I915_READ(VLV_PSRCTL(pipe));
>  



More information about the dri-devel mailing list