[PATCH v8 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board

Hoegeun Kwon hoegeun.kwon at samsung.com
Wed Jan 11 06:33:59 UTC 2017


From: Hyungwon Hwang <human.hwang at samsung.com>

This patch add the panel device tree node for S6E3HA2 display
controller to TM2 dts.

Signed-off-by: Hyungwon Hwang <human.hwang at samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
Tested-by: Chanwoo Choi <cw00.choi at samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index ddba2f8..6d362f9 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -18,6 +18,18 @@
 	compatible = "samsung,tm2", "samsung,exynos5433";
 };
 
+&dsi {
+	panel at 0 {
+		compatible = "samsung,s6e3ha2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &hsi2c_9 {
 	status = "okay";
 
-- 
1.9.1



More information about the dri-devel mailing list