[PATCH v8 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board

[hoegeun kwon]

On 01/11/2017 04:46 PM, Andrzej Hajda wrote:
> On 11.01.2017 07:33, Hoegeun Kwon wrote:
>> From: Hyungwon Hwang <human.hwang at samsung.com>
>>
>> This patch add the panel device tree node for S6E3HA2 display
>> controller to TM2 dts.
>>
>> Signed-off-by: Hyungwon Hwang <human.hwang at samsung.com>
>> Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
>> Signed-off-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
>> Tested-by: Chanwoo Choi <cw00.choi at samsung.com>
>> ---
>>   arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 12 ++++++++++++
>>   1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> index ddba2f8..6d362f9 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> @@ -18,6 +18,18 @@
>>   	compatible = "samsung,tm2", "samsung,exynos5433";
>>   };
>>   
>> +&dsi {
>> +	panel at 0 {
>> +		compatible = "samsung,s6e3ha2";
>> +		reg = <0>;
>> +		vdd3-supply = <&ldo27_reg>;
>> +		vci-supply = <&ldo28_reg>;
>> +		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
>> +		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
>> +		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
> The same here (as in 1st comment) , te-gpios should be dropper - decon
> uses hw-trigger.

Hi Andrzej,

Thanks for your quick review.

Reasonable to remove te-gpios property,
The Tizen public already has [1] your patch applied and te-gpios removed.
So I will add [1] to the V9 patch.

[1] 
https://review.tizen.org/gerrit/gitweb?p=platform/kernel/linux-exynos.git;a=commitdiff;h=468769bf6abbaaed2547b8c43e989ab5dc787900

Best Regards,
Hoegeun

>
> Regards
> Andrzej
>> +	};
>> +};
>> +
>>   &hsi2c_9 {
>>   	status = "okay";
>>   
>
>
>