[PATCH 06/10] drm/i915/psr: set CHICKEN_TRANS for psr2
vathsala nagaraju
vathsala.nagaraju at intel.com
Thu Jan 12 19:01:31 UTC 2017
As per bpsec, CHICKEN_TRANS_EDP bit 12 ,15 must be programmed in
psr2 enable sequence.
bit 12 : Program Transcoder EDP VSC DIP header with a valid setting for
PSR2 and Set CHICKEN_TRANS_EDP(0x420cc) bit 12 for programmable
header packet.
bit 15 : Set CHICKEN_TRANS_EDP(0x420cc) bit 15 if Y coordinate is supported
v2: (Rodrigo)
- move CHICKEN_TRANS_EDP bit set logic right after setup_vsc
v3:(Rodrigo)
- initialize chicken_trans to CHICKEN_TRANS_BIT12 instead of 0
v4:(chris wilson)
- use BIT(12), remove CHICKEN_TRANS_BIT12
- remove unnecessary comments
- update commit message
v5:
- rename bit 12 PSR2_VSC_ENABLE_PROG_HEADER
- rename bit 15 PSR2_ADD_VERTICAL_LINE_COUNT
v6:(Rodrigo)
- remove TRANS_EDP=3, use cpu_transcoder
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Cc: Jim Bride <jim.bride at linux.intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju at intel.com>
Signed-off-by: Patil Deepti <deepti.patil at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 6 ++++++
drivers/gpu/drm/i915/intel_psr.c | 7 +++++++
2 files changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7830e6e..c9c1ccd 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6449,6 +6449,12 @@ enum {
#define BDW_DPRS_MASK_VBLANK_SRD (1 << 0)
#define CHICKEN_PIPESL_1(pipe) _MMIO_PIPE(pipe, _CHICKEN_PIPESL_1_A, _CHICKEN_PIPESL_1_B)
+#define CHICKEN_TRANS_A 0x420c0
+#define CHICKEN_TRANS_B 0x420c4
+#define CHICKEN_TRANS(trans) _MMIO_TRANS(trans, CHICKEN_TRANS_A, CHICKEN_TRANS_B)
+#define PSR2_VSC_ENABLE_PROG_HEADER (1<<12)
+#define PSR2_ADD_VERTICAL_LINE_COUNT (1<<15)
+
#define DISP_ARB_CTL _MMIO(0x45000)
#define DISP_FBC_MEMORY_WAKE (1<<31)
#define DISP_TILE_SURFACE_SWIZZLING (1<<13)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 36c4045..935402e 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -480,6 +480,9 @@ void intel_psr_enable(struct intel_dp *intel_dp)
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+ enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
+ u32 chicken;
if (!HAS_PSR(dev_priv)) {
DRM_DEBUG_KMS("PSR not supported on this platform\n");
@@ -505,6 +508,10 @@ void intel_psr_enable(struct intel_dp *intel_dp)
if (HAS_DDI(dev_priv)) {
if (dev_priv->psr.psr2_support) {
skl_psr_setup_su_vsc(intel_dp);
+ chicken = PSR2_VSC_ENABLE_PROG_HEADER;
+ if (dev_priv->psr.y_cord_support)
+ chicken |= PSR2_ADD_VERTICAL_LINE_COUNT;
+ I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
} else {
/* set up vsc header for psr1 */
hsw_psr_setup_vsc(intel_dp);
--
1.9.1
More information about the dri-devel
mailing list