[PATCH v1 1/7] dt-bindings: display: add STM32 LTDC driver
Yannick Fertre
yannick.fertre at st.com
Mon Jan 16 13:28:58 UTC 2017
Signed-off-by: Yannick Fertre <yannick.fertre at st.com>
---
.../devicetree/bindings/display/st,ltdc.txt | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/st,ltdc.txt
diff --git a/Documentation/devicetree/bindings/display/st,ltdc.txt b/Documentation/devicetree/bindings/display/st,ltdc.txt
new file mode 100644
index 0000000..20e89da
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,ltdc.txt
@@ -0,0 +1,57 @@
+* STMicroelectronics STM32 lcd-tft display controller
+
+- st-display-subsystem: Master device for DRM sub-components
+ This device must be the parent of all the sub-components and is responsible
+ of bind them.
+ Required properties:
+ - compatible: "st,display-subsystem"
+ - ranges: to allow probing of subdevices
+
+- ltdc_host: lcd-tft display controller host
+ must be a sub-node of st-display-subsystem
+ Required properties:
+ - compatible: "st,ltdc"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - resets: resets to be used by the device
+ See ../reset/reset.txt for details.
+ - reset-names: names of the resets listed in resets property in the same
+ order.
+ Required nodes:
+ - Video port for RGB output.
+
+Example:
+
+/ {
+ ...
+ soc {
+ ...
+ st-display-subsystem {
+ compatible = "st,display-subsystem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ dma-ranges;
+
+ ltdc_host: stm32-ltdc at 40016800 {
+ compatible = "st,ltdc";
+ reg = <0x40016800 0x200>;
+ interrupts = <88>, <89>;
+ resets = <&rcc 314>;
+ clocks = <&rcc 1 8>;
+ clock-names = "clk-lcd";
+ status = "disabled";
+
+ port {
+ ltdc_out_rgb: endpoint {
+ };
+ };
+ };
+ };
+ ...
+ };
+};
--
1.9.1
More information about the dri-devel
mailing list