[Nouveau] [PATCH 5/6] drm: Delete "mandatory" stereographic modes

Ilia Mirkin imirkin at alum.mit.edu
Wed Jan 18 16:27:16 UTC 2017


On Wed, Jan 18, 2017 at 6:45 AM, Damien Lespiau
<damien.lespiau at intel.com> wrote:
> On Wed, Jan 18, 2017 at 12:10:56AM -0500, Ilia Mirkin wrote:
>> On Tue, Jan 17, 2017 at 5:42 PM, Alastair Bridgewater
>> <alastair.bridgewater at gmail.com> wrote:
>> > HDMI specification 1.4a, table 8-15 is very explicitly a "must
>> > support at least one of" table, not a "must support all of" table.
>> > It is not hard to find hardware that does not support some of the
>> > so-called "mandatory" modes.
>> >
>> > More seriously, this code generates invalid display modes for both
>> > of the 3D-capable panels that I have (a 42-inch LG TV and a Sony
>> > PlayStation 3D Display).
>> >
>> > If we want to be persnickety, one option would be to check the
>> > final list of modes against the table and give some message if
>> > none of them are valid, but it's a whole lot easier just to delete
>> > the code in question.
>>
>> Damien added this in commit c858cfcae6d some 3 years ago.
>>
>> Damien, do you remember why you added these "required" modes? Did you
>> have a monitor that only advertised 3D support without the actual
>> modes?
>
> Another quick glance at the specs leads me to believe c858cfcae6d is
> correct.
>
> 8-15 does say that a sink supporting 3D must at lesst support one of the
> modes listed in that table. But that's just the very start of the story
> and we are really talking about the 3D_present bit in the HMDI VSDB and
> the associated "mandatory" modes (the term comes from the spec).
>
> HDMI 1.4a Page 155:
>
> "3D_present [1bit] This bit indicates 3D support by the HDMI Sink,
> including the mandatory formats. If set (=1), an HDMI Sink supports the
> 3D video formats that are mandatory formats,"
>
> Continuing page 157:
>
> "If 3D_present is set (=1), an HDMI Sink shall support 3D video formats
> per the following requirements.
> ・An HDMI Sink which supports at least one 59.94 / 60Hz 2D video format
> shall support *all* of <list of mandatory formats>"
> ・An HDMI Sink which supports at least one 50Hz 2D video format shall
> support *all* of <list of mandatory formats>"
>
> The 3D pdf extraction from the spec is available would one want to
> triple check the above:
>
>    http://www.hdmi.org/manufacturer/specification.aspx
>
> I have even dug up a direct link that someone made available:
>
>   https://etmriwi.home.xs4all.nl/forum/hdmi_spec1.4a_3dextraction.pdf
>
> Look for 3D_present, p. 15 and 17.
>
> If the above is indeed correct, there may still be an issue in the way
> we derive the mandatory modes - that part isn't really clear. Or, it
> could be that people don't follow standards!

OK, so the text definitely makes it seem like you're right.

Damien - did you ever test these mandatory modes on an actual
commercial 3D TV or similar device?

Alastair - I think this warrants some more attempts at getting those
"extra" modes to work. I'd be especially curious whether the blob
shows support for these modes, or what Windows shows with any
hardware.


More information about the dri-devel mailing list