[PATCH v2 25/26] drm/rockchip: dw-mipi-dsi: add reset control

John Keeping john at metanate.com
Sat Jan 21 16:31:27 UTC 2017


In order to fully reset the state of the MIPI controller we must assert
this reset.

This is slightly more complicated than it could be in order to maintain
compatibility with device trees that do not specify the reset property.

Signed-off-by: John Keeping <john at metanate.com>
---
Unchanged in v2
---
 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index 881bb0c62ca5..f780401e8b5e 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/regmap.h>
+#include <linux/reset.h>
 #include <linux/mfd/syscon.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
@@ -1121,6 +1122,7 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
 			of_match_device(dw_mipi_dsi_dt_ids, dev);
 	const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
 	struct platform_device *pdev = to_platform_device(dev);
+	struct reset_control *apb_rst;
 	struct drm_device *drm = data;
 	struct dw_mipi_dsi *dsi;
 	struct resource *res;
@@ -1159,6 +1161,34 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	/*
+	 * Note that the reset was not defined in the initial device tree, so
+	 * we have to be prepared for it not being found.
+	 */
+	apb_rst = devm_reset_control_get(dev, "apb");
+	if (IS_ERR(apb_rst)) {
+		if (PTR_ERR(apb_rst) == -ENODEV) {
+			apb_rst = NULL;
+		} else {
+			dev_err(dev, "Unable to get reset control: %d\n", ret);
+			return PTR_ERR(apb_rst);
+		}
+	}
+
+	if (apb_rst) {
+		ret = clk_prepare_enable(dsi->pclk);
+		if (ret) {
+			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
+			return ret;
+		}
+
+		reset_control_assert(apb_rst);
+		usleep_range(10, 20);
+		reset_control_deassert(apb_rst);
+
+		clk_disable_unprepare(dsi->pclk);
+	}
+
 	ret = clk_prepare_enable(dsi->pllref_clk);
 	if (ret) {
 		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
-- 
2.11.0.197.gb556de5.dirty



More information about the dri-devel mailing list