[PATCH 3/5] drm: zte: add function to configure vou_ctrl dividers

Sean Paul seanpaul at chromium.org
Mon Jan 23 15:47:09 UTC 2017


On Fri, Jan 20, 2017 at 12:24:58AM +0800, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo at linaro.org>
> 
> The clock control module (CRM) cannot always provide desired frequency
> for all VOU output devices.  That's why VOU integrates a few dividers
> to further divide the clocks from CRM.  Let's add an interface for
> configuring these dividers.
> 

Reviewed-by: Sean Paul <seanpaul at chromium.org>

> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> ---
>  drivers/gpu/drm/zte/zx_vou.c      | 79 +++++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/zte/zx_vou.h      | 25 +++++++++++++
>  drivers/gpu/drm/zte/zx_vou_regs.h | 16 ++++++++
>  3 files changed, 120 insertions(+)
> 
> diff --git a/drivers/gpu/drm/zte/zx_vou.c b/drivers/gpu/drm/zte/zx_vou.c
> index c48704b4425a..98f0f51f9748 100644
> --- a/drivers/gpu/drm/zte/zx_vou.c
> +++ b/drivers/gpu/drm/zte/zx_vou.c
> @@ -72,6 +72,13 @@ struct zx_crtc_bits {
>  	u32 sec_vactive_mask;
>  	u32 interlace_select;
>  	u32 pi_enable;
> +	u32 div_vga_shift;
> +	u32 div_pic_shift;
> +	u32 div_tvenc_shift;
> +	u32 div_hdmi_pnx_shift;
> +	u32 div_hdmi_shift;
> +	u32 div_inf_shift;
> +	u32 div_layer_shift;
>  };
>  
>  static const struct zx_crtc_bits main_crtc_bits = {
> @@ -83,6 +90,13 @@ struct zx_crtc_bits {
>  	.sec_vactive_mask = SEC_VACT_MAIN_MASK,
>  	.interlace_select = MAIN_INTERLACE_SEL,
>  	.pi_enable = MAIN_PI_EN,
> +	.div_vga_shift = VGA_MAIN_DIV_SHIFT,
> +	.div_pic_shift = PIC_MAIN_DIV_SHIFT,
> +	.div_tvenc_shift = TVENC_MAIN_DIV_SHIFT,
> +	.div_hdmi_pnx_shift = HDMI_MAIN_PNX_DIV_SHIFT,
> +	.div_hdmi_shift = HDMI_MAIN_DIV_SHIFT,
> +	.div_inf_shift = INF_MAIN_DIV_SHIFT,
> +	.div_layer_shift = LAYER_MAIN_DIV_SHIFT,
>  };
>  
>  static const struct zx_crtc_bits aux_crtc_bits = {
> @@ -94,6 +108,13 @@ struct zx_crtc_bits {
>  	.sec_vactive_mask = SEC_VACT_AUX_MASK,
>  	.interlace_select = AUX_INTERLACE_SEL,
>  	.pi_enable = AUX_PI_EN,
> +	.div_vga_shift = VGA_AUX_DIV_SHIFT,
> +	.div_pic_shift = PIC_AUX_DIV_SHIFT,
> +	.div_tvenc_shift = TVENC_AUX_DIV_SHIFT,
> +	.div_hdmi_pnx_shift = HDMI_AUX_PNX_DIV_SHIFT,
> +	.div_hdmi_shift = HDMI_AUX_DIV_SHIFT,
> +	.div_inf_shift = INF_AUX_DIV_SHIFT,
> +	.div_layer_shift = LAYER_AUX_DIV_SHIFT,
>  };
>  
>  struct zx_crtc {
> @@ -220,6 +241,64 @@ void vou_inf_disable(enum vou_inf_id id, struct drm_crtc *crtc)
>  	zx_writel_mask(vou->vouctl + VOU_CLK_EN, inf->clocks_en_bits, 0);
>  }
>  
> +void zx_vou_config_dividers(struct drm_crtc *crtc,
> +			    struct vou_div_config *configs, int num)
> +{
> +	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> +	struct zx_vou_hw *vou = zcrtc->vou;
> +	const struct zx_crtc_bits *bits = zcrtc->bits;
> +	int i;
> +
> +	/* Clear update flag bit */
> +	zx_writel_mask(vou->vouctl + VOU_DIV_PARA, DIV_PARA_UPDATE, 0);
> +
> +	for (i = 0; i < num; i++) {
> +		struct vou_div_config *cfg = configs + i;
> +		u32 reg, shift;
> +
> +		switch (cfg->id) {
> +		case VOU_DIV_VGA:
> +			reg = VOU_CLK_SEL;
> +			shift = bits->div_vga_shift;
> +			break;
> +		case VOU_DIV_PIC:
> +			reg = VOU_CLK_SEL;
> +			shift = bits->div_pic_shift;
> +			break;
> +		case VOU_DIV_TVENC:
> +			reg = VOU_DIV_PARA;
> +			shift = bits->div_tvenc_shift;
> +			break;
> +		case VOU_DIV_HDMI_PNX:
> +			reg = VOU_DIV_PARA;
> +			shift = bits->div_hdmi_pnx_shift;
> +			break;
> +		case VOU_DIV_HDMI:
> +			reg = VOU_DIV_PARA;
> +			shift = bits->div_hdmi_shift;
> +			break;
> +		case VOU_DIV_INF:
> +			reg = VOU_DIV_PARA;
> +			shift = bits->div_inf_shift;
> +			break;
> +		case VOU_DIV_LAYER:
> +			reg = VOU_DIV_PARA;
> +			shift = bits->div_layer_shift;
> +			break;
> +		default:
> +			continue;
> +		}
> +
> +		/* Each divider occupies 3 bits */
> +		zx_writel_mask(vou->vouctl + reg, 0x7 << shift,
> +			       cfg->val << shift);
> +	}
> +
> +	/* Set update flag bit to get dividers effected */
> +	zx_writel_mask(vou->vouctl + VOU_DIV_PARA, DIV_PARA_UPDATE,
> +		       DIV_PARA_UPDATE);
> +}
> +
>  static inline void vou_chn_set_update(struct zx_crtc *zcrtc)
>  {
>  	zx_writel(zcrtc->chnreg + CHN_UPDATE, 1);
> diff --git a/drivers/gpu/drm/zte/zx_vou.h b/drivers/gpu/drm/zte/zx_vou.h
> index a41a0ad49857..0dae4faefac4 100644
> --- a/drivers/gpu/drm/zte/zx_vou.h
> +++ b/drivers/gpu/drm/zte/zx_vou.h
> @@ -33,6 +33,31 @@ enum vou_inf_data_sel {
>  void vou_inf_enable(enum vou_inf_id id, struct drm_crtc *crtc);
>  void vou_inf_disable(enum vou_inf_id id, struct drm_crtc *crtc);
>  
> +enum vou_div_id {
> +	VOU_DIV_VGA,
> +	VOU_DIV_PIC,
> +	VOU_DIV_TVENC,
> +	VOU_DIV_HDMI_PNX,
> +	VOU_DIV_HDMI,
> +	VOU_DIV_INF,
> +	VOU_DIV_LAYER,
> +};
> +
> +enum vou_div_val {
> +	VOU_DIV_1 = 0,
> +	VOU_DIV_2 = 1,
> +	VOU_DIV_4 = 3,
> +	VOU_DIV_8 = 7,
> +};
> +
> +struct vou_div_config {
> +	enum vou_div_id id;
> +	enum vou_div_val val;
> +};
> +
> +void zx_vou_config_dividers(struct drm_crtc *crtc,
> +			    struct vou_div_config *configs, int num);
> +
>  int zx_vou_enable_vblank(struct drm_device *drm, unsigned int pipe);
>  void zx_vou_disable_vblank(struct drm_device *drm, unsigned int pipe);
>  
> diff --git a/drivers/gpu/drm/zte/zx_vou_regs.h b/drivers/gpu/drm/zte/zx_vou_regs.h
> index e6ed844e068a..552772137cf0 100644
> --- a/drivers/gpu/drm/zte/zx_vou_regs.h
> +++ b/drivers/gpu/drm/zte/zx_vou_regs.h
> @@ -176,11 +176,27 @@
>  #define VOU_INF_DATA_SEL		0x08
>  #define VOU_SOFT_RST			0x14
>  #define VOU_CLK_SEL			0x18
> +#define VGA_AUX_DIV_SHIFT		29
> +#define VGA_MAIN_DIV_SHIFT		26
> +#define PIC_MAIN_DIV_SHIFT		23
> +#define PIC_AUX_DIV_SHIFT		20
>  #define VOU_CLK_VL2_SEL			BIT(8)
>  #define VOU_CLK_VL1_SEL			BIT(7)
>  #define VOU_CLK_VL0_SEL			BIT(6)
>  #define VOU_CLK_GL1_SEL			BIT(5)
>  #define VOU_CLK_GL0_SEL			BIT(4)
> +#define VOU_DIV_PARA			0x1c
> +#define DIV_PARA_UPDATE			BIT(31)
> +#define TVENC_AUX_DIV_SHIFT		28
> +#define HDMI_AUX_PNX_DIV_SHIFT		25
> +#define HDMI_MAIN_PNX_DIV_SHIFT		22
> +#define HDMI_AUX_DIV_SHIFT		19
> +#define HDMI_MAIN_DIV_SHIFT		16
> +#define TVENC_MAIN_DIV_SHIFT		13
> +#define INF_AUX_DIV_SHIFT		9
> +#define INF_MAIN_DIV_SHIFT		6
> +#define LAYER_AUX_DIV_SHIFT		3
> +#define LAYER_MAIN_DIV_SHIFT		0
>  #define VOU_CLK_REQEN			0x20
>  #define VOU_CLK_EN			0x24
>  
> -- 
> 1.9.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Sean Paul, Software Engineer, Google / Chromium OS


More information about the dri-devel mailing list