[PATCH 5/5] drm: zte: add tvenc driver support
Sean Paul
seanpaul at chromium.org
Mon Jan 23 16:10:34 UTC 2017
On Fri, Jan 20, 2017 at 12:25:00AM +0800, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo at linaro.org>
>
> It adds the TV Encoder driver to support video output in PAL and NTSC
> format. The driver uses syscon/regmap interface to configure register
> bit sitting in SYSCTRL module for DAC power control.
>
> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> ---
> drivers/gpu/drm/zte/Makefile | 1 +
> drivers/gpu/drm/zte/zx_drm_drv.c | 1 +
> drivers/gpu/drm/zte/zx_drm_drv.h | 1 +
> drivers/gpu/drm/zte/zx_tvenc.c | 416 ++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/zte/zx_tvenc_regs.h | 31 +++
> drivers/gpu/drm/zte/zx_vou.c | 5 +
> 6 files changed, 455 insertions(+)
> create mode 100644 drivers/gpu/drm/zte/zx_tvenc.c
> create mode 100644 drivers/gpu/drm/zte/zx_tvenc_regs.h
>
> diff --git a/drivers/gpu/drm/zte/Makefile b/drivers/gpu/drm/zte/Makefile
> index 699180bfd57c..01352b56c418 100644
> --- a/drivers/gpu/drm/zte/Makefile
> +++ b/drivers/gpu/drm/zte/Makefile
> @@ -2,6 +2,7 @@ zxdrm-y := \
> zx_drm_drv.o \
> zx_hdmi.o \
> zx_plane.o \
> + zx_tvenc.o \
> zx_vou.o
>
> obj-$(CONFIG_DRM_ZTE) += zxdrm.o
> diff --git a/drivers/gpu/drm/zte/zx_drm_drv.c b/drivers/gpu/drm/zte/zx_drm_drv.c
> index 3e76f72c92ff..13081fed902d 100644
> --- a/drivers/gpu/drm/zte/zx_drm_drv.c
> +++ b/drivers/gpu/drm/zte/zx_drm_drv.c
> @@ -247,6 +247,7 @@ static int zx_drm_remove(struct platform_device *pdev)
> static struct platform_driver *drivers[] = {
> &zx_crtc_driver,
> &zx_hdmi_driver,
> + &zx_tvenc_driver,
> &zx_drm_platform_driver,
> };
>
> diff --git a/drivers/gpu/drm/zte/zx_drm_drv.h b/drivers/gpu/drm/zte/zx_drm_drv.h
> index e65cd18a6cba..5ca035b079c7 100644
> --- a/drivers/gpu/drm/zte/zx_drm_drv.h
> +++ b/drivers/gpu/drm/zte/zx_drm_drv.h
> @@ -13,6 +13,7 @@
>
> extern struct platform_driver zx_crtc_driver;
> extern struct platform_driver zx_hdmi_driver;
> +extern struct platform_driver zx_tvenc_driver;
>
> static inline u32 zx_readl(void __iomem *reg)
> {
> diff --git a/drivers/gpu/drm/zte/zx_tvenc.c b/drivers/gpu/drm/zte/zx_tvenc.c
> new file mode 100644
> index 000000000000..5a6cff1ff8a8
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_tvenc.c
> @@ -0,0 +1,416 @@
> +/*
> + * Copyright 2017 Linaro Ltd.
> + * Copyright 2017 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drmP.h>
> +
> +#include "zx_drm_drv.h"
> +#include "zx_tvenc_regs.h"
> +#include "zx_vou.h"
> +
> +struct zx_tvenc_pwrctrl {
> + struct regmap *regmap;
> + u32 reg;
> + u32 mask;
> +};
> +
> +struct zx_tvenc {
> + struct drm_connector connector;
> + struct drm_encoder encoder;
> + struct device *dev;
> + void __iomem *mmio;
> + const struct vou_inf *inf;
> + struct zx_tvenc_pwrctrl pwrctrl;
> +};
> +
> +#define to_zx_tvenc(x) container_of(x, struct zx_tvenc, x)
> +
> +struct zx_tvenc_mode {
> + char *name;
> + u32 hdisplay;
> + u32 vdisplay;
> + u32 hfp;
> + u32 hbp;
> + u32 hsw;
> + u32 vfp;
> + u32 vbp;
> + u32 vsw;
Let's not duplicate these fields and do conversions. I think you should embed a
drm_display_mode struct here instead and just return it in get_modes. Check out
panel_desc in drivers/gpu/drm/panel/panel-simple.c, I think you can do something
similar here.
> + u32 video_info;
> + u32 video_res;
> + u32 field1_param;
> + u32 field2_param;
> + u32 burst_line_odd1;
> + u32 burst_line_even1;
> + u32 burst_line_odd2;
> + u32 burst_line_even2;
> + u32 line_timing_param;
> + u32 weight_value;
> + u32 blank_black_level;
> + u32 burst_level;
> + u32 control_param;
> + u32 sub_carrier_phase1;
> + u32 phase_line_incr_cvbs;
> +};
> +
> +static const struct zx_tvenc_mode tvenc_modes[] = {
> + {
> + .name = "PAL",
> + .hdisplay = 720,
> + .vdisplay = 576,
> + .hfp = 12,
> + .hbp = 130,
> + .hsw = 2,
> + .vfp = 2,
> + .vbp = 20,
> + .vsw = 2,
> + .video_info = 0x00040040,
> + .video_res = 0x05a9c760,
> + .field1_param = 0x0004d416,
> + .field2_param = 0x0009b94f,
> + .burst_line_odd1 = 0x0004d406,
> + .burst_line_even1 = 0x0009b53e,
> + .burst_line_odd2 = 0x0004d805,
> + .burst_line_even2 = 0x0009b93f,
> + .line_timing_param = 0x06a96fdf,
> + .weight_value = 0x00c188a0,
> + .blank_black_level = 0x0000fcfc,
> + .burst_level = 0x00001595,
> + .control_param = 0x00000001,
> + .sub_carrier_phase1 = 0x1504c566,
> + .phase_line_incr_cvbs = 0xc068db8c,
I don't suppose you can derive these magic values from the mode?
> + }, {
> + .name = "NTSC",
> + .hdisplay = 720,
> + .vdisplay = 480,
> + .hfp = 16,
> + .hbp = 120,
> + .hsw = 2,
> + .vfp = 3,
> + .vbp = 17,
> + .vsw = 2,
> + .video_info = 0x00040080,
> + .video_res = 0x05a8375a,
> + .field1_param = 0x00041817,
> + .field2_param = 0x0008351e,
> + .burst_line_odd1 = 0x00041006,
> + .burst_line_even1 = 0x0008290d,
> + .burst_line_odd2 = 0x00000000,
> + .burst_line_even2 = 0x00000000,
> + .line_timing_param = 0x06a8ef9e,
> + .weight_value = 0x00b68197,
> + .blank_black_level = 0x0000f0f0,
> + .burst_level = 0x0000009c,
> + .control_param = 0x00000001,
> + .sub_carrier_phase1 = 0x10f83e10,
> + .phase_line_incr_cvbs = 0x80000000,
> + },
> +};
> +
> +static const struct zx_tvenc_mode *
> +zx_tvenc_find_zmode(struct drm_display_mode *mode)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(tvenc_modes); i++) {
> + const struct zx_tvenc_mode *zmode = &tvenc_modes[i];
> +
> + if (!strcmp(mode->name, zmode->name))
drm_mode_equal() is your friend
> + return zmode;
> + }
> +
> + return NULL;
> +}
> +
> +static void zx_tvenc_encoder_mode_set(struct drm_encoder *encoder,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adj_mode)
> +{
> + struct zx_tvenc *tvenc = to_zx_tvenc(encoder);
> + const struct zx_tvenc_mode *zmode;
> + struct vou_div_config configs[] = {
> + { VOU_DIV_INF, VOU_DIV_4 },
> + { VOU_DIV_TVENC, VOU_DIV_1 },
> + { VOU_DIV_LAYER, VOU_DIV_2 },
> + };
> +
> + zx_vou_config_dividers(encoder->crtc, configs, ARRAY_SIZE(configs));
> +
> + zmode = zx_tvenc_find_zmode(mode);
> + if (!zmode) {
> + DRM_DEV_ERROR(tvenc->dev, "failed to find zmode\n");
> + return;
> + }
> +
> + zx_writel(tvenc->mmio + VENC_VIDEO_INFO, zmode->video_info);
> + zx_writel(tvenc->mmio + VENC_VIDEO_RES, zmode->video_res);
> + zx_writel(tvenc->mmio + VENC_FIELD1_PARAM, zmode->field1_param);
> + zx_writel(tvenc->mmio + VENC_FIELD2_PARAM, zmode->field2_param);
> + zx_writel(tvenc->mmio + VENC_LINE_O_1, zmode->burst_line_odd1);
> + zx_writel(tvenc->mmio + VENC_LINE_E_1, zmode->burst_line_even1);
> + zx_writel(tvenc->mmio + VENC_LINE_O_2, zmode->burst_line_odd2);
> + zx_writel(tvenc->mmio + VENC_LINE_E_2, zmode->burst_line_even2);
> + zx_writel(tvenc->mmio + VENC_LINE_TIMING_PARAM,
> + zmode->line_timing_param);
> + zx_writel(tvenc->mmio + VENC_WEIGHT_VALUE, zmode->weight_value);
> + zx_writel(tvenc->mmio + VENC_BLANK_BLACK_LEVEL,
> + zmode->blank_black_level);
> + zx_writel(tvenc->mmio + VENC_BURST_LEVEL, zmode->burst_level);
> + zx_writel(tvenc->mmio + VENC_CONTROL_PARAM, zmode->control_param);
> + zx_writel(tvenc->mmio + VENC_SUB_CARRIER_PHASE1,
> + zmode->sub_carrier_phase1);
> + zx_writel(tvenc->mmio + VENC_PHASE_LINE_INCR_CVBS,
> + zmode->phase_line_incr_cvbs);
> +}
> +
> +static void zx_tvenc_encoder_enable(struct drm_encoder *encoder)
> +{
> + struct zx_tvenc *tvenc = to_zx_tvenc(encoder);
> + struct zx_tvenc_pwrctrl *pwrctrl = &tvenc->pwrctrl;
> +
> + /* Set bit to power up TVENC DAC */
> + regmap_update_bits(pwrctrl->regmap, pwrctrl->reg, pwrctrl->mask,
> + pwrctrl->mask);
> +
> + vou_inf_enable(VOU_TV_ENC, encoder->crtc);
> +
> + zx_writel(tvenc->mmio + VENC_ENABLE, 1);
> +}
> +
> +static void zx_tvenc_encoder_disable(struct drm_encoder *encoder)
> +{
> + struct zx_tvenc *tvenc = to_zx_tvenc(encoder);
> + struct zx_tvenc_pwrctrl *pwrctrl = &tvenc->pwrctrl;
> +
> + zx_writel(tvenc->mmio + VENC_ENABLE, 0);
> +
> + vou_inf_disable(VOU_TV_ENC, encoder->crtc);
> +
> + /* Clear bit to power down TVENC DAC */
> + regmap_update_bits(pwrctrl->regmap, pwrctrl->reg, pwrctrl->mask, 0);
> +}
> +
> +static const struct drm_encoder_helper_funcs zx_tvenc_encoder_helper_funcs = {
> + .enable = zx_tvenc_encoder_enable,
> + .disable = zx_tvenc_encoder_disable,
> + .mode_set = zx_tvenc_encoder_mode_set,
> +};
> +
> +static const struct drm_encoder_funcs zx_tvenc_encoder_funcs = {
> + .destroy = drm_encoder_cleanup,
> +};
> +
> +static void zx_tvenc_mode_to_drm_mode(const struct zx_tvenc_mode *zmode,
> + struct drm_display_mode *mode)
> +{
> + strcpy(mode->name, zmode->name);
Consider drm_mode_set_name() instead of rolling your own names
> +
> + mode->type = DRM_MODE_TYPE_DRIVER;
> + mode->flags = DRM_MODE_FLAG_INTERLACE;
> + mode->flags |= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC;
> +
> + /*
> + * The CRM cannot directly provide such a low rate, and we have to
> + * ask a multiflied rate from CRM and use the divider in VOU to get
s/multified/multiplied/
> + * the disired one.
s/disired/desired/
> + */
> + mode->clock = 13500 * 4;
I don't think this should be hardcoded at runtime, stick it in the modes above
> +
> + mode->hdisplay = zmode->hdisplay;
> + mode->hsync_start = mode->hdisplay + zmode->hfp;
> + mode->hsync_end = mode->hsync_start + zmode->hsw;
> + mode->htotal = mode->hsync_end + zmode->hbp;
> +
> + mode->vdisplay = zmode->vdisplay;
> + mode->vsync_start = mode->vdisplay + zmode->vfp;
> + mode->vsync_end = mode->vsync_start + zmode->vsw;
> + mode->vtotal = mode->vsync_end + zmode->vbp;
> +}
> +
> +static int zx_tvenc_connector_get_modes(struct drm_connector *connector)
> +{
> + struct zx_tvenc *tvenc = to_zx_tvenc(connector);
> + struct device *dev = tvenc->dev;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(tvenc_modes); i++) {
> + struct drm_display_mode *mode;
> + const struct zx_tvenc_mode *zmode = &tvenc_modes[i];
> +
> + mode = drm_mode_create(connector->dev);
> + if (!mode) {
> + DRM_DEV_ERROR(dev, "failed to create drm mode\n");
> + return 0;
> + }
> +
> + zx_tvenc_mode_to_drm_mode(zmode, mode);
> + drm_mode_probed_add(connector, mode);
> + }
> +
> + return i;
> +}
> +
> +static enum drm_mode_status
> +zx_tvenc_connector_mode_valid(struct drm_connector *connector,
> + struct drm_display_mode *mode)
> +{
You probably want to do a sanity check to ensure the mode is in your list above
(and not user-submitted).
> + return MODE_OK;
> +}
> +
> +static struct drm_connector_helper_funcs zx_tvenc_connector_helper_funcs = {
> + .get_modes = zx_tvenc_connector_get_modes,
> + .mode_valid = zx_tvenc_connector_mode_valid,
> +};
> +
> +static const struct drm_connector_funcs zx_tvenc_connector_funcs = {
> + .dpms = drm_atomic_helper_connector_dpms,
> + .fill_modes = drm_helper_probe_single_connector_modes,
> + .destroy = drm_connector_cleanup,
> + .reset = drm_atomic_helper_connector_reset,
> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int zx_tvenc_register(struct drm_device *drm, struct zx_tvenc *tvenc)
> +{
> + struct drm_encoder *encoder = &tvenc->encoder;
> + struct drm_connector *connector = &tvenc->connector;
> +
> + /*
> + * The tvenc is designed to use aux channel, as there is a deflicker
> + * block for the channel.
> + */
> + encoder->possible_crtcs = BIT(1);
> +
> + drm_encoder_init(drm, encoder, &zx_tvenc_encoder_funcs,
> + DRM_MODE_ENCODER_TVDAC, NULL);
> + drm_encoder_helper_add(encoder, &zx_tvenc_encoder_helper_funcs);
> +
> + connector->interlace_allowed = true;
> +
> + drm_connector_init(drm, connector, &zx_tvenc_connector_funcs,
> + DRM_MODE_CONNECTOR_Composite);
> + drm_connector_helper_add(connector, &zx_tvenc_connector_helper_funcs);
> +
> + drm_mode_connector_attach_encoder(connector, encoder);
> +
> + return 0;
> +}
> +
> +static int zx_tvenc_pwrctrl_init(struct zx_tvenc *tvenc)
> +{
> + struct zx_tvenc_pwrctrl *pwrctrl = &tvenc->pwrctrl;
> + struct device *dev = tvenc->dev;
> + struct of_phandle_args out_args;
> + struct regmap *regmap;
> + int ret;
> +
> + ret = of_parse_phandle_with_fixed_args(dev->of_node,
> + "zte,tvenc-power-control", 2, 0, &out_args);
> + if (ret)
> + return ret;
> +
> + regmap = syscon_node_to_regmap(out_args.np);
> + if (IS_ERR(regmap)) {
> + ret = PTR_ERR(regmap);
> + goto out;
> + }
> +
> + pwrctrl->regmap = regmap;
> + pwrctrl->reg = out_args.args[0];
> + pwrctrl->mask = out_args.args[1];
> +
> +out:
> + of_node_put(out_args.np);
> + return ret;
> +}
> +
> +static int zx_tvenc_bind(struct device *dev, struct device *master, void *data)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct drm_device *drm = data;
> + struct resource *res;
> + struct zx_tvenc *tvenc;
> + int ret;
> +
> + tvenc = devm_kzalloc(dev, sizeof(*tvenc), GFP_KERNEL);
> + if (!tvenc)
> + return -ENOMEM;
> +
> + tvenc->dev = dev;
> + dev_set_drvdata(dev, tvenc);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + tvenc->mmio = devm_ioremap_resource(dev, res);
> + if (IS_ERR(tvenc->mmio)) {
> + ret = PTR_ERR(tvenc->mmio);
> + DRM_DEV_ERROR(dev, "failed to remap tvenc region: %d\n", ret);
> + return ret;
> + }
> +
> + ret = zx_tvenc_pwrctrl_init(tvenc);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "failed to init power control: %d\n", ret);
> + return ret;
> + }
> +
> + ret = zx_tvenc_register(drm, tvenc);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "failed to register tvenc: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void zx_tvenc_unbind(struct device *dev, struct device *master,
> + void *data)
> +{
> + struct zx_tvenc *tvenc = dev_get_drvdata(dev);
> +
> + tvenc->connector.funcs->destroy(&tvenc->connector);
> + tvenc->encoder.funcs->destroy(&tvenc->encoder);
I think drm_mode_config_cleanup() should take care of calling these
> +}
> +
> +static const struct component_ops zx_tvenc_component_ops = {
> + .bind = zx_tvenc_bind,
> + .unbind = zx_tvenc_unbind,
> +};
> +
> +static int zx_tvenc_probe(struct platform_device *pdev)
> +{
> + return component_add(&pdev->dev, &zx_tvenc_component_ops);
> +}
> +
> +static int zx_tvenc_remove(struct platform_device *pdev)
> +{
> + component_del(&pdev->dev, &zx_tvenc_component_ops);
> + return 0;
> +}
> +
> +static const struct of_device_id zx_tvenc_of_match[] = {
> + { .compatible = "zte,zx296718-tvenc", },
> + { /* end */ },
> +};
> +MODULE_DEVICE_TABLE(of, zx_tvenc_of_match);
> +
> +struct platform_driver zx_tvenc_driver = {
> + .probe = zx_tvenc_probe,
> + .remove = zx_tvenc_remove,
> + .driver = {
> + .name = "zx-tvenc",
> + .of_match_table = zx_tvenc_of_match,
> + },
> +};
> diff --git a/drivers/gpu/drm/zte/zx_tvenc_regs.h b/drivers/gpu/drm/zte/zx_tvenc_regs.h
> new file mode 100644
> index 000000000000..bd91f5dcc1f3
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_tvenc_regs.h
> @@ -0,0 +1,31 @@
> +/*
> + * Copyright 2017 Linaro Ltd.
> + * Copyright 2017 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __ZX_TVENC_REGS_H__
> +#define __ZX_TVENC_REGS_H__
> +
> +#define VENC_VIDEO_INFO 0x04
> +#define VENC_VIDEO_RES 0x08
> +#define VENC_FIELD1_PARAM 0x10
> +#define VENC_FIELD2_PARAM 0x14
> +#define VENC_LINE_O_1 0x18
> +#define VENC_LINE_E_1 0x1c
> +#define VENC_LINE_O_2 0x20
> +#define VENC_LINE_E_2 0x24
> +#define VENC_LINE_TIMING_PARAM 0x28
> +#define VENC_WEIGHT_VALUE 0x2c
> +#define VENC_BLANK_BLACK_LEVEL 0x30
> +#define VENC_BURST_LEVEL 0x34
> +#define VENC_CONTROL_PARAM 0x3c
> +#define VENC_SUB_CARRIER_PHASE1 0x40
> +#define VENC_PHASE_LINE_INCR_CVBS 0x48
> +#define VENC_ENABLE 0xa8
> +
> +#endif /* __ZX_TVENC_REGS_H__ */
> diff --git a/drivers/gpu/drm/zte/zx_vou.c b/drivers/gpu/drm/zte/zx_vou.c
> index 98f0f51f9748..61d4ff709d83 100644
> --- a/drivers/gpu/drm/zte/zx_vou.c
> +++ b/drivers/gpu/drm/zte/zx_vou.c
> @@ -192,6 +192,11 @@ struct vou_inf {
> .clocks_en_bits = BIT(24) | BIT(18) | BIT(6),
> .clocks_sel_bits = BIT(13) | BIT(2),
> },
> + [VOU_TV_ENC] = {
> + .data_sel = VOU_YUV444,
> + .clocks_en_bits = BIT(15),
> + .clocks_sel_bits = BIT(11) | BIT(0),
> + },
> };
>
> static inline struct zx_vou_hw *crtc_to_vou(struct drm_crtc *crtc)
> --
> 1.9.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Sean Paul, Software Engineer, Google / Chromium OS
More information about the dri-devel
mailing list