[PATCH 15/15] drm: Update kerneldoc for drm_crtc.[hc]

Eric Engestrom eric.engestrom at imgtec.com
Wed Jan 25 14:26:09 UTC 2017


On Wednesday, 2017-01-25 07:26:57 +0100, Daniel Vetter wrote:
> After going through all the trouble of splitting out parts from
> drm_crtc.[hc] and then properly documenting each I've entirely
> forgotten to show the same TLC for CRTCs themselves!
> 
> Let's make amends asap.
> 
> Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
> ---
>  Documentation/gpu/drm-kms.rst |  6 ++++++
>  drivers/gpu/drm/drm_crtc.c    | 21 +++++++++++++++++++++
>  include/drm/drm_crtc.h        | 25 +++++++++++++++++++------
>  3 files changed, 46 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
> index 35c41cf84a1b..979cee853bb1 100644
> --- a/Documentation/gpu/drm-kms.rst
> +++ b/Documentation/gpu/drm-kms.rst
> @@ -284,6 +284,12 @@ Atomic Mode Setting Function Reference
>  CRTC Abstraction
>  ================
>  
> +.. kernel-doc:: drivers/gpu/drm/drm_crtc.c
> +   :doc: overview
> +
> +CRTC Functions Reference
> +--------------------------------
> +
>  .. kernel-doc:: include/drm/drm_crtc.h
>     :internal:
>  
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 5f28e3a5a3e0..6915f897bd8e 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -47,6 +47,27 @@
>  #include "drm_internal.h"
>  
>  /**
> + * DOC: overview
> + *
> + * A CRTC represents the overall display pipeline. It receives pixel data from
> + * &drm_plane and blends them together. The &drm_display_mode is also attached
> + * to the CRTC, specifying display timings. On the output side the data is fed
> + * to one or more &drm_encoder, which are then each connected to one
> + * &drm_connector.
> + *
> + * To create a CRTC, a KMS drivers allocates and zeroes an instances of
> + * &struct drm_crtc (possibly as part of a larger structure) and registers it
> + * with a call to drm_crtc_init_with_planes().
> + *
> + * The CRTC is also the entry point for legacy modeset operations, see
> + * &drm_crtc_funcs.set_config, legacy plane operations, see
> + * &drm_crtc_funcs.page_flip and &drm_crtc_funcs.cursor_set2, and other legacy
> + * operations like &drm_crtc_funcs.gamma_set. For atomic drivers all these
> + * features are controlled through &drm_property and
> + * &drm_mode_config_funcs.atomic_check and &drm_mode_config_funcs.atomic_check.
> + */
> +
> +/**
>   * drm_crtc_from_index - find the registered CRTC at an index
>   * @dev: DRM device
>   * @idx: index of registered CRTC to find for
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 816edab054e6..d788c624f67a 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -641,7 +641,7 @@ struct drm_crtc {
>  	 *
>  	 * This provides a read lock for the overall crtc state (mode, dpms
>  	 * state, ...) and a write lock for everything which can be update
> -	 * without a full modeset (fb, cursor data, crtc properties ...). Full
> +	 * without a full modeset (fb, cursor data, crtc properties ...). A full
>  	 * modeset also need to grab &drm_mode_config.connection_mutex.
>  	 */
>  	struct drm_modeset_lock mutex;
> @@ -774,10 +774,8 @@ struct drm_crtc {
>   * @connectors: array of connectors to drive with this CRTC if possible
>   * @num_connectors: size of @connectors array
>   *
> - * Represents a single crtc the connectors that it drives with what mode
> - * and from which framebuffer it scans out from.
> - *
> - * This is used to set modes.
> + * This represents a modeset configuration for the legacy SETCRTC ioctl and is
> + * also used internally. Atomic drivers instead use &drm_atomic_state.
>   */
>  struct drm_mode_set {
>  	struct drm_framebuffer *fb;
> @@ -832,7 +830,15 @@ int drm_crtc_force_disable_all(struct drm_device *dev);
>  int drm_mode_set_config_internal(struct drm_mode_set *set);
>  struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx);
>  
> -/* Helpers */
> +/**
> + * drm_crtc_find - look up a CRTC object from its ID
> + * @dev: DRM device
> + * @id: &drm_mode_object ID
> + *
> + * This can be used to look up a CRTC from its userspace ID. Only used by
> + * drivers for legacy IOCTLs and interface, nowadays extensions to the KMS
> + * userspace interface should be done using &drm_property.
> + */
>  static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
>  	uint32_t id)
>  {
> @@ -841,6 +847,13 @@ static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
>  	return mo ? obj_to_crtc(mo) : NULL;
>  }
>  
> +/**
> + * drm_for_each_crtc - iterate over all encoders

s/encoder/crtc/ :)

Other than that, this and #3 (btw I know you didn't introduce any of the
typos in #3, but you can fix them :P) are:
Reviewed-by: Eric Engestrom <eric.engestrom at imgtec.com>

> + * @crtc: a &struct drm_crtc as the loop cursor
> + * @dev: the &struct drm_device
> + *
> + * Iterate over all CRTCs of @dev.
> + */
>  #define drm_for_each_crtc(crtc, dev) \
>  	list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
>  
> -- 
> 2.11.0
> 


More information about the dri-devel mailing list