[PATCH] drm/bridge: dw_hdmi: add cec notifier support
Neil Armstrong
narmstrong at baylibre.com
Thu Jul 6 10:33:06 UTC 2017
From: Russell King <rmk+kernel at armlinux.org.uk>
Add CEC notifier support to the HDMI bridge driver, so that the CEC
part of the IP can receive its physical address.
Tested-by: Neil Armstrong <narmstrong at baylibre.com>
Acked-by: Neil Armstrong <narmstrong at baylibre.com>
Acked-by: Hans Verkuil <hans.verkuil at cisco.com>
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
Hi Archit, Hans,
This is repost of Russell's patch from his dw-hdmi CEC patchset.
Since his CEC implementation will be integrated in the bridge driver,
this notifier patch won't be re-posted.
But the Amlogic Platform needs a notifier since it uses a standalone CEC
controller.
Thanks,
Neil
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index ead1124..9c03846 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -33,6 +33,8 @@
#include <uapi/linux/media-bus-format.h>
#include <uapi/linux/videodev2.h>
+#include <media/cec-notifier.h>
+
#include "dw-hdmi.h"
#include "dw-hdmi-audio.h"
@@ -175,6 +177,8 @@ struct dw_hdmi {
struct regmap *regm;
void (*enable_audio)(struct dw_hdmi *hdmi);
void (*disable_audio)(struct dw_hdmi *hdmi);
+
+ struct cec_notifier *cec_notifier;
};
#define HDMI_IH_PHY_STAT0_RX_SENSE \
@@ -1896,6 +1900,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
drm_mode_connector_update_edid_property(connector, edid);
+ cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
ret = drm_add_edid_modes(connector, edid);
/* Store the ELD */
drm_edid_to_eld(connector, edid);
@@ -2077,6 +2082,10 @@ void __dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
dw_hdmi_update_phy_mask(hdmi);
}
mutex_unlock(&hdmi->mutex);
+
+ if (!rx_sense && !hpd)
+ cec_notifier_set_phys_addr(hdmi->cec_notifier,
+ CEC_PHYS_ADDR_INVALID);
}
void dw_hdmi_setup_rx_sense(struct device *dev, bool hpd, bool rx_sense)
@@ -2376,6 +2385,12 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
if (ret)
goto err_iahb;
+ hdmi->cec_notifier = cec_notifier_get(dev);
+ if (!hdmi->cec_notifier) {
+ ret = -ENOMEM;
+ goto err_iahb;
+ }
+
/*
* To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
* N and cts values before enabling phy
@@ -2452,6 +2467,9 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
hdmi->ddc = NULL;
}
+ if (hdmi->cec_notifier)
+ cec_notifier_put(hdmi->cec_notifier);
+
clk_disable_unprepare(hdmi->iahb_clk);
err_isfr:
clk_disable_unprepare(hdmi->isfr_clk);
--
1.9.1
More information about the dri-devel
mailing list