[PATCH v2 2/3] dt-bindings: display: panel: Add support for Orise Tech otm8009a dsi panel

[Philippe CORNU]

The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
a MIPI-DSI video interface. Its backlight is managed through the DSI link.

Signed-off-by: Philippe CORNU <philippe.cornu at st.com>
---
 .../bindings/display/panel/orisetech,otm8009a.txt   | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt

diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
new file mode 100644
index 0000000..6862028
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
@@ -0,0 +1,21 @@
+Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+
+Required properties:
+  - compatible: "orisetech,otm8009a"
+  - reg: the virtual channel number of a DSI peripheral
+
+Optional properties:
+  - reset-gpios: a GPIO spec for the reset pin (active low).
+
+Example:
+&dsi {
+	...
+	panel at 0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+	};
+};
-- 
1.9.1