[PATCH 10/20] drm/i915: add config function for YCBCR420 outputs
Sharma, Shashank
shashank.sharma at intel.com
Thu Jul 13 13:01:25 UTC 2017
Regards
Shashank
On 7/13/2017 6:23 PM, Ville Syrjälä wrote:
> On Thu, Jul 13, 2017 at 10:56:06AM +0530, Sharma, Shashank wrote:
>> Regards
>>
>> Shashank
>>
>>
>> On 7/12/2017 10:47 PM, Ville Syrjälä wrote:
>>> On Mon, Jul 10, 2017 at 04:48:38PM +0530, Shashank Sharma wrote:
>>>> This patch checks encoder level support for YCBCR420 outputs.
>>>> The logic goes as simple as this:
>>>> If the input mode is YCBCR420-only mode: prepare HDMI for
>>>> YCBCR420 output, else continue with RGB output mode.
>>>>
>>>> It checks if the mode is YCBCR420 and source can support this
>>>> output then it marks the ycbcr_420 output indicator into crtc
>>>> state, for further staging in driver.
>>>>
>>>> V2: Split the patch into two, kept helper functions in DRM layer.
>>>> V3: Changed the compute_config function based on new DRM API.
>>>> V4: Rebase
>>>> V5: Rebase
>>>> V6: Check and handle YCBCR420-only modes, discard the property
>>>> based approach (Ville)
>>>>
>>>> Signed-off-by: Shashank Sharma <shashank.sharma at intel.com>
>>>> ---
>>>> drivers/gpu/drm/i915/intel_display.c | 1 +
>>>> drivers/gpu/drm/i915/intel_drv.h | 3 +++
>>>> drivers/gpu/drm/i915/intel_hdmi.c | 42 +++++++++++++++++++++++++++++++++---
>>>> 3 files changed, 43 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>>>> index 4e03ca6..01900e1 100644
>>>> --- a/drivers/gpu/drm/i915/intel_display.c
>>>> +++ b/drivers/gpu/drm/i915/intel_display.c
>>>> @@ -11930,6 +11930,7 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
>>>> PIPE_CONF_CHECK_I(hdmi_scrambling);
>>>> PIPE_CONF_CHECK_I(hdmi_high_tmds_clock_ratio);
>>>> PIPE_CONF_CHECK_I(has_infoframe);
>>>> + PIPE_CONF_CHECK_I(ycbcr420);
>>>>
>>>> PIPE_CONF_CHECK_I(has_audio);
>>>>
>>>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>>>> index d17a324..592243b 100644
>>>> --- a/drivers/gpu/drm/i915/intel_drv.h
>>>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>>>> @@ -780,6 +780,9 @@ struct intel_crtc_state {
>>>>
>>>> /* HDMI High TMDS char rate ratio */
>>>> bool hdmi_high_tmds_clock_ratio;
>>>> +
>>>> + /* HDMI output type */
>>>> + bool ycbcr420;
>>>> };
>>>>
>>>> struct intel_crtc {
>>>> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
>>>> index cc0d100..276d916 100644
>>>> --- a/drivers/gpu/drm/i915/intel_hdmi.c
>>>> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
>>>> @@ -1305,7 +1305,8 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
>>>> return status;
>>>> }
>>>>
>>>> -static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
>>>> +static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state,
>>>> + bool output_ycbcr420)
>>> You alreayd have the crtc state, so no need to pass that stuff
>>> separately.
>> Ah, this was dumb, thanks !
>>>> {
>>>> struct drm_i915_private *dev_priv =
>>>> to_i915(crtc_state->base.crtc->dev);
>>>> @@ -1330,6 +1331,13 @@ static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
>>>> if (connector_state->crtc != crtc_state->base.crtc)
>>>> continue;
>>>>
>>>> + if (output_ycbcr420) {
>>>> + const struct drm_hdmi_info *hdmi = &info->hdmi;
>>>> +
>>>> + if (!(hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_36))
>>>> + return false;
>>>> + }
>>>> +
>>> else?
>> Oops, needs an else { break;}
> I was thinking 'else if ...'
Do we need else if for 12 BPC case, I was thinking of:
if (!hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_36)
/* 12 BPC Y420 not possible */
return false;
else
/* output is going to be 420, and 12BPC is possible, so break the
loop */
break;
This will also allow the code to go through the WAR Added below.
- Shashank
>
>> - Shashank
>>>> if ((info->edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_36) == 0)
>>>> return false;
>>>> }
>>>> @@ -1342,6 +1350,25 @@ static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
>>>> return true;
>>>> }
>>>>
>>>> +static bool
>>>> +intel_hdmi_ycbcr420_config(struct drm_connector *connector,
>>>> + struct intel_crtc_state *config,
>>>> + int *clock_12bpc, int *clock_8bpc)
>>>> +{
>>>> +
>>>> + if (!connector->ycbcr_420_allowed) {
>>>> + DRM_ERROR("Platform doesn't support YCBCR420 output\n");
>>>> + return false;
>>>> + }
>>>> +
>>>> + /* YCBCR420 TMDS rate requirement is half the pixel clock */
>>>> + config->port_clock /= 2;
>>>> + *clock_12bpc /= 2;
>>>> + *clock_8bpc /= 2;
>>>> + config->ycbcr420 = true;
>>>> + return true;
>>>> +}
>>>> +
>>>> bool intel_hdmi_compute_config(struct intel_encoder *encoder,
>>>> struct intel_crtc_state *pipe_config,
>>>> struct drm_connector_state *conn_state)
>>>> @@ -1349,7 +1376,8 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
>>>> struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
>>>> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>>>> struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
>>>> - struct drm_scdc *scdc = &conn_state->connector->display_info.hdmi.scdc;
>>>> + struct drm_connector *connector = conn_state->connector;
>>>> + struct drm_scdc *scdc = &connector->display_info.hdmi.scdc;
>>>> struct intel_digital_connector_state *intel_conn_state =
>>>> to_intel_digital_connector_state(conn_state);
>>>> int clock_8bpc = pipe_config->base.adjusted_mode.crtc_clock;
>>>> @@ -1379,6 +1407,14 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
>>>> clock_12bpc *= 2;
>>>> }
>>>>
>>>> + if (drm_mode_is_420_only(&connector->display_info, adjusted_mode)) {
>>>> + if (!intel_hdmi_ycbcr420_config(connector, pipe_config,
>>>> + &clock_12bpc, &clock_8bpc)) {
>>>> + DRM_ERROR("Can't support YCBCR420 output\n");
>>>> + return false;
>>>> + }
>>>> + }
>>>> +
>>>> if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv))
>>>> pipe_config->has_pch_encoder = true;
>>>>
>>>> @@ -1398,7 +1434,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
>>>> */
>>>> if (pipe_config->pipe_bpp > 8*3 && pipe_config->has_hdmi_sink && !force_dvi &&
>>>> hdmi_port_clock_valid(intel_hdmi, clock_12bpc, true, force_dvi) == MODE_OK &&
>>>> - hdmi_12bpc_possible(pipe_config)) {
>>>> + hdmi_12bpc_possible(pipe_config, pipe_config->ycbcr420)) {
>>>> DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
>>>> desired_bpp = 12*3;
>>>>
>>>> --
>>>> 2.7.4
>>>>
>>>> _______________________________________________
>>>> dri-devel mailing list
>>>> dri-devel at lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the dri-devel
mailing list