[PATCH v2 06/14] v4l: vsp1: Add pipe index argument to the VSP-DU API

[Laurent Pinchart]

Hi Kieran,

On Thursday 13 Jul 2017 14:16:03 Kieran Bingham wrote:
> On 26/06/17 19:12, Laurent Pinchart wrote:
> > In the H3 ES2.0 SoC the VSP2-DL instance has two connections to DU
> > channels that need to be configured independently. Extend the VSP-DU API
> > with a pipeline index to identify which pipeline the caller wants to
> > operate on.
> > 
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas at ideasonboard.com>
> 
> A bit of comment merge between this and the next patch but it's minor and
> not worth the effort to change that ... so I'll happily ignore it if you do
> :)
> 
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
> 
> > ---
> > 
> >  drivers/gpu/drm/rcar-du/rcar_du_vsp.c  | 12 ++++++------
> >  drivers/media/platform/vsp1/vsp1_drm.c | 32 +++++++++++++++++++--------
> >  include/media/vsp1.h                   | 10 ++++++----
> >  3 files changed, 34 insertions(+), 20 deletions(-)

[snip]

> > diff --git a/drivers/media/platform/vsp1/vsp1_drm.c
> > b/drivers/media/platform/vsp1/vsp1_drm.c index c72d021ff820..daaafe7885fa
> > 100644
> > --- a/drivers/media/platform/vsp1/vsp1_drm.c
> > +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> > @@ -58,21 +58,26 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
> >  /**
> >   * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
> >   * @dev: the VSP device
> > + * @pipe_index: the DRM pipeline index
> >   * @cfg: the LIF configuration
> >   *
> >   * Configure the output part of VSP DRM pipeline for the given frame
> >   @cfg.width
> > - * and @cfg.height. This sets up formats on the BRU source pad, the WPF0
> > sink
> > - * and source pads, and the LIF sink pad.
> > + * and @cfg.height. This sets up formats on the blend unit (BRU or BRS)
> > source
> > + * pad, the WPF sink and source pads, and the LIF sink pad.
> >   *
> > - * As the media bus code on the BRU source pad is conditioned by the
> > - * configuration of the BRU sink 0 pad, we also set up the formats on all
> > BRU
> > + * The @pipe_index argument selects which DRM pipeline to setup. The
> > number of
> > + * available pipelines depend on the VSP instance.
> > + *
> > + * As the media bus code on the blend unit source pad is conditioned by
> > the
> > + * configuration of its sink 0 pad, we also set up the formats on all
> > blend unit
> >   * sinks, even if the configuration will be overwritten later by
> > - * vsp1_du_setup_rpf(). This ensures that the BRU configuration is set to
> > a well
> > - * defined state.
> > + * vsp1_du_setup_rpf(). This ensures that the blend unit configuration is
> > set to
> > + * a well defined state.
> 
> I presume those comment updates for the BRU/ blend-unit configuration are
> actually for the next patch - but I don't think it matters here - and isn't
> worth the effort to move the hunks.

Too late, I've fixed it already :-) Thanks for pointing it out.

> It all reads OK.
> 
> >   *
> >   * Return 0 on success or a negative error code on failure.
> >   */
> > -int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config
> > *cfg)
> > +int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> > +		      const struct vsp1_du_lif_config *cfg)
> >  {
> >  	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
> >  	struct vsp1_pipeline *pipe = &vsp1->drm->pipe;

[snip]

-- 
Regards,

Laurent Pinchart