[PATCH i-g-t v2 7/7] kms_writeback: Add tests using a cloned output

Liviu Dudau liviu.dudau at arm.com
Fri Jul 14 15:18:56 UTC 2017


From: Brian Starkey <brian.starkey at arm.com>

Update the connector search to also optionally attempt to find a
non-writeback connector to clone to.

Add a subtest which is the same as writeback-check-output, but also
clones to the second connector.

Signed-off-by: Brian Starkey <brian.starkey at arm.com>
---
 tests/kms_writeback.c | 63 ++++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 55 insertions(+), 8 deletions(-)

diff --git a/tests/kms_writeback.c b/tests/kms_writeback.c
index 8201a81c..9a34bca0 100644
--- a/tests/kms_writeback.c
+++ b/tests/kms_writeback.c
@@ -81,7 +81,8 @@ static uint32_t pick_writeback_format(igt_output_t *output)
 	return format;
 }
 
-static bool check_writeback_config(igt_display_t *display, igt_output_t *output)
+static bool check_writeback_config(igt_display_t *display, igt_output_t *output,
+				   int pipe, igt_output_t **clone)
 {
 	igt_fb_t input_fb, output_fb;
 	igt_plane_t *plane;
@@ -123,6 +124,27 @@ static bool check_writeback_config(igt_display_t *display, igt_output_t *output)
 
 	ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
 					    DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+	if (!ret && clone) {
+		/* Try and find a clone */
+		int i, newret;
+		*clone = NULL;
+
+		for (i = 0; i < display->n_outputs; i++) {
+			igt_output_t *second_output = &display->outputs[i];
+			if (output != second_output &&
+			    igt_pipe_connector_valid(pipe, second_output)) {
+
+				igt_output_clone_pipe(second_output, pipe);
+				newret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
+								    DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+				igt_output_set_pipe(second_output, PIPE_NONE);
+				if (!newret) {
+					*clone = second_output;
+					break;
+				}
+			}
+		}
+	}
 	igt_plane_set_fb(plane, NULL);
 	igt_remove_fb(display->drm_fd, &input_fb);
 	igt_remove_fb(display->drm_fd, &output_fb);
@@ -130,7 +152,8 @@ static bool check_writeback_config(igt_display_t *display, igt_output_t *output)
 	return !ret;
 }
 
-static igt_output_t *kms_writeback_get_output(igt_display_t *display)
+static igt_output_t *kms_writeback_get_output(igt_display_t *display, enum pipe *pipe,
+					      igt_output_t **clone)
 {
 	int i;
 
@@ -146,10 +169,16 @@ static igt_output_t *kms_writeback_get_output(igt_display_t *display)
 		for (j = 0; j < igt_display_get_n_pipes(display); j++) {
 			igt_output_set_pipe(output, j);
 
-			if (check_writeback_config(display, output)) {
+			if (check_writeback_config(display, output, j, clone)) {
 				igt_debug("Using connector %u:%s on pipe %d\n",
 					  output->config.connector->connector_id,
 					  output->name, j);
+				if (clone && *clone)
+					igt_debug("Cloning to connector %u:%s\n",
+						  (*clone)->config.connector->connector_id,
+						  (*clone)->name);
+				if (pipe)
+					*pipe = j;
 				return output;
 			}
 		}
@@ -190,9 +219,6 @@ static int do_writeback_test(igt_output_t *output, uint32_t flags,
 		igt_pipe_t *pipe_obj = &display->pipes[pipe];
 		igt_plane_t *plane;
 
-		/*
-		 * Add CRTC Properties to the property set
-		 */
 		igt_atomic_prepare_crtc_commit(pipe_obj, req);
 
 		for_each_plane_on_pipe(display, pipe, plane) {
@@ -391,10 +417,11 @@ static void writeback_check_output(igt_output_t *output, igt_plane_t *plane,
 igt_main
 {
 	igt_display_t display;
-	igt_output_t *output;
+	igt_output_t *output, *clone;
 	igt_plane_t *plane;
 	igt_fb_t input_fb;
 	drmModeModeInfo mode;
+	enum pipe pipe;
 	int ret;
 
 	memset(&display, 0, sizeof(display));
@@ -409,7 +436,7 @@ igt_main
 
 		igt_require(display.is_atomic);
 
-		output = kms_writeback_get_output(&display);
+		output = kms_writeback_get_output(&display, &pipe, &clone);
 		igt_require(output);
 
 		if (output->use_override_mode)
@@ -487,6 +514,26 @@ igt_main
 		igt_remove_fb(display.drm_fd, &output_fb);
 	}
 
+	igt_subtest("writeback-check-output-clone") {
+		igt_fb_t output_fb;
+
+		igt_require(clone);
+
+		ret = igt_create_fb(display.drm_fd, mode.hdisplay, mode.vdisplay,
+				    DRM_FORMAT_XRGB8888,
+				    igt_fb_mod_to_tiling(0),
+				    &output_fb);
+		igt_require(ret > 0);
+
+		igt_output_clone_pipe(clone, pipe);
+
+		writeback_check_output(output, plane, &input_fb, &output_fb);
+
+		igt_output_set_pipe(clone, PIPE_NONE);
+
+		igt_remove_fb(display.drm_fd, &output_fb);
+	}
+
 	igt_fixture {
 		igt_remove_fb(display.drm_fd, &input_fb);
 		igt_display_fini(&display);
-- 
2.13.2



More information about the dri-devel mailing list