[PATCH v5 1/6] drm/vc4: Avoid using vrefresh==0 mode in DSI htotal math.

[Eric Anholt]

The incoming mode might have a missing vrefresh field if it came from
drmModeSetCrtc(), which the kernel is supposed to calculate using
drm_mode_vrefresh().  We could either use that or the adjusted_mode's
original vrefresh value.

However, we can maintain a more exact vrefresh value (not just the
integer approximation), by scaling by the ratio of our clocks.

v2: Use math suggested by Andrzej Hajda instead.

Signed-off-by: Eric Anholt <eric at anholt.net>
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index 629d372633e6..57213f4e3c72 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -866,7 +866,8 @@ static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
 	adjusted_mode->clock = pixel_clock_hz / 1000 + 1;
 
 	/* Given the new pixel clock, adjust HFP to keep vrefresh the same. */
-	adjusted_mode->htotal = pixel_clock_hz / (mode->vrefresh * mode->vtotal);
+	adjusted_mode->htotal = (pixel_clock_hz / 1000 * mode->htotal /
+				 mode->clock);
 	adjusted_mode->hsync_end += adjusted_mode->htotal - mode->htotal;
 	adjusted_mode->hsync_start += adjusted_mode->htotal - mode->htotal;
 
-- 
2.11.0