[PATCH v1 2/7] drm/stm: ltdc: Cleanup signal polarity defines

[Benjamin Gaignard]

2017-07-18 12:20 GMT+02:00 Philippe CORNU <philippe.cornu at st.com>:
> The GCR_PCPOL/DEPOL/VSPOL/HSPOL defines are sufficient to
> describe the HS, VS, DE & PC signal polarities.
>
> Signed-off-by: Philippe CORNU <philippe.cornu at st.com>

Reviewed-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>

> ---
>  drivers/gpu/drm/stm/ltdc.c | 28 ++++++++++------------------
>  1 file changed, 10 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index e46b427..50e8a89 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -104,10 +104,10 @@
>
>  #define GCR_LTDCEN     BIT(0)          /* LTDC ENable */
>  #define GCR_DEN                BIT(16)         /* Dither ENable */
> -#define GCR_PCPOL      BIT(28)         /* Pixel Clock POLarity */
> -#define GCR_DEPOL      BIT(29)         /* Data Enable POLarity */
> -#define GCR_VSPOL      BIT(30)         /* Vertical Synchro POLarity */
> -#define GCR_HSPOL      BIT(31)         /* Horizontal Synchro POLarity */
> +#define GCR_PCPOL      BIT(28)         /* Pixel Clock POLarity-Inverted */
> +#define GCR_DEPOL      BIT(29)         /* Data Enable POLarity-High */
> +#define GCR_VSPOL      BIT(30)         /* Vertical Synchro POLarity-High */
> +#define GCR_HSPOL      BIT(31)         /* Horizontal Synchro POLarity-High */
>
>  #define GC1R_WBCH      GENMASK(3, 0)   /* Width of Blue CHannel output */
>  #define GC1R_WGCH      GENMASK(7, 4)   /* Width of Green Channel output */
> @@ -174,14 +174,6 @@
>
>  #define LXCFBLNR_CFBLN GENMASK(10, 0)   /* Color Frame Buffer Line Number */
>
> -#define HSPOL_AL   0           /* Horizontal Sync POLarity Active Low */
> -#define VSPOL_AL   0           /* Vertical Sync POLarity Active Low */
> -#define DEPOL_AL   0           /* Data Enable POLarity Active Low */
> -#define PCPOL_IPC  0           /* Input Pixel Clock */
> -#define HSPOL_AH   GCR_HSPOL   /* Horizontal Sync POLarity Active High */
> -#define VSPOL_AH   GCR_VSPOL   /* Vertical Sync POLarity Active High */
> -#define DEPOL_AH   GCR_DEPOL   /* Data Enable POLarity Active High */
> -#define PCPOL_IIPC GCR_PCPOL   /* Inverted Input Pixel Clock */
>  #define CONSTA_MAX 0xFF                /* CONSTant Alpha MAX= 1.0 */
>  #define BF1_PAXCA  0x600       /* Pixel Alpha x Constant Alpha */
>  #define BF1_CA     0x400       /* Constant Alpha */
> @@ -459,20 +451,20 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
>
>         clk_enable(ldev->pixel_clk);
>
> -       /* Configures the HS, VS, DE and PC polarities. */
> -       val = HSPOL_AL | VSPOL_AL | DEPOL_AL | PCPOL_IPC;
> +       /* Configures the HS, VS, DE and PC polarities. Default Active Low */
> +       val = 0;
>
>         if (vm.flags & DISPLAY_FLAGS_HSYNC_HIGH)
> -               val |= HSPOL_AH;
> +               val |= GCR_HSPOL;
>
>         if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
> -               val |= VSPOL_AH;
> +               val |= GCR_VSPOL;
>
>         if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
> -               val |= DEPOL_AH;
> +               val |= GCR_DEPOL;
>
>         if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
> -               val |= PCPOL_IIPC;
> +               val |= GCR_PCPOL;
>
>         reg_update_bits(ldev->regs, LTDC_GCR,
>                         GCR_HSPOL | GCR_VSPOL | GCR_DEPOL | GCR_PCPOL, val);
> --
> 1.9.1
>