[PATCH 07/18] drm/sun4i: tcon: Don't rely on encoders to set the TCON mode
Maxime Ripard
maxime.ripard at free-electrons.com
Thu Jul 20 13:34:48 UTC 2017
On Fri, Jul 14, 2017 at 11:56:18AM +0800, Chen-Yu Tsai wrote:
> On Thu, Jul 13, 2017 at 10:13 PM, Maxime Ripard
> <maxime.ripard at free-electrons.com> wrote:
> > Just like we did for the TCON enable and disable, for historical reasons we
> > used to rely on the encoders calling the TCON mode_set function, while the
> > CRTC has a callback for that.
> >
> > Let's implement it in order to reduce the boilerplate code.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> > ---
> > drivers/gpu/drm/sun4i/sun4i_crtc.c | 11 ++++-
> > drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c | 1 +-
> > drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 7 +---
> > drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c | 1 +-
> > drivers/gpu/drm/sun4i/sun4i_rgb.c | 15 +------
> > drivers/gpu/drm/sun4i/sun4i_tcon.c | 56 ++++++++++------------
> > drivers/gpu/drm/sun4i/sun4i_tcon.h | 10 +----
> > drivers/gpu/drm/sun4i/sun4i_tv.c | 6 +--
> > 8 files changed, 40 insertions(+), 67 deletions(-)
> >
>
> [...]
>
> > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > index dc70bc2a42a5..c4407910dfaf 100644
> > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > @@ -106,29 +106,6 @@ void sun4i_tcon_enable_vblank(struct sun4i_tcon *tcon, bool enable)
> > }
> > EXPORT_SYMBOL(sun4i_tcon_enable_vblank);
> >
> > -void sun4i_tcon_set_mux(struct sun4i_tcon *tcon, int channel,
> > - struct drm_encoder *encoder)
> > -{
> > - u32 val;
> > -
> > - if (!tcon->quirks->has_unknown_mux)
> > - return;
> > -
> > - if (channel != 1)
> > - return;
> > -
> > - if (encoder->encoder_type == DRM_MODE_ENCODER_TVDAC)
> > - val = 1;
> > - else
> > - val = 0;
> > -
> > - /*
> > - * FIXME: Undocumented bits
> > - */
> > - regmap_write(tcon->regs, SUN4I_TCON_MUX_CTRL_REG, val);
> > -}
> > -EXPORT_SYMBOL(sun4i_tcon_set_mux);
> > -
> > static int sun4i_tcon_get_clk_delay(struct drm_display_mode *mode,
> > int channel)
> > {
> > @@ -147,8 +124,8 @@ static int sun4i_tcon_get_clk_delay(struct drm_display_mode *mode,
> > return delay;
> > }
> >
> > -void sun4i_tcon0_mode_set(struct sun4i_tcon *tcon,
> > - struct drm_display_mode *mode)
> > +static void sun4i_tcon0_mode_set(struct sun4i_tcon *tcon,
> > + struct drm_display_mode *mode)
>
> Nit on the side: maybe we could mark mode as constant?
> Since the function doesn't change it. Same applies to the
> other mode_set functions. But this could be left to another
> patch.
We totally should. I'll do it.
> > {
> > unsigned int bp, hsync, vsync;
> > u8 clk_delay;
> > @@ -221,10 +198,9 @@ void sun4i_tcon0_mode_set(struct sun4i_tcon *tcon,
> > /* Enable the output on the pins */
> > regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0);
> > }
> > -EXPORT_SYMBOL(sun4i_tcon0_mode_set);
> >
> > -void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
> > - struct drm_display_mode *mode)
> > +static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
> > + struct drm_display_mode *mode)
> > {
> > unsigned int bp, hsync, vsync, vtotal;
> > u8 clk_delay;
> > @@ -312,7 +288,29 @@ void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
> > SUN4I_TCON_GCTL_IOMAP_MASK,
> > SUN4I_TCON_GCTL_IOMAP_TCON1);
> > }
> > -EXPORT_SYMBOL(sun4i_tcon1_mode_set);
> > +
> > +void sun4i_tcon_mode_set(struct sun4i_tcon *tcon, struct drm_encoder *encoder,
> > + struct drm_display_mode *mode)
>
> (also mark encoder as const?)
Yep.
> > +{
> > + switch (encoder->encoder_type) {
> > + case DRM_MODE_ENCODER_NONE:
> > + sun4i_tcon0_mode_set(tcon, mode);
> > + break;
> > + case DRM_MODE_ENCODER_TVDAC:
> > + /*
> > + * FIXME: Undocumented bits
> > + */
> > + if (tcon->quirks->has_unknown_mux)
> > + regmap_write(tcon->regs, SUN4I_TCON_MUX_CTRL_REG, 1);
> > + /* Fallthrough */
> > + case DRM_MODE_ENCODER_TMDS:
> > + sun4i_tcon1_mode_set(tcon, mode);
>
> IIRC you need to clear the mux bit here. So ...
>
> > + break;
> > + default:
> > + DRM_DEBUG_DRIVER("Unknown encoder type, doing nothing...\n");
> > + }
>
> I think keeping the muxing in a separate function would be cleaner.
> The above is already slightly messy if you add the bit clearing part.
> With all the other muxing possibilities in the other SoC this is
> going to get really messy.
Ok.
> > +}
> > +EXPORT_SYMBOL(sun4i_tcon_mode_set);
> >
> > static void sun4i_tcon_finish_page_flip(struct drm_device *dev,
> > struct sun4i_crtc *scrtc)
>
> [...]
>
> Thanks for working on this. Now we've decoupled the TCON/CRTC code
> from all the encoders.
Yeah, I still have mixed feelings about this, but it was the sensible
thing I guess.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20170720/32a179b5/attachment.sig>
More information about the dri-devel
mailing list