[PATCHv1 12/14] drm/omap: panel-dsi-cm: switch to gpiod

[Sebastian Reichel]

Use the new descriptor based GPIO API instead of
the legacy one, which results in cleaner code
with less lines of code.

Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.co.uk>
---
 drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 74 +++++++++----------------
 1 file changed, 27 insertions(+), 47 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index 1eeb8b0d10c2..8f7463392047 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -22,7 +22,6 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/regulator/consumer.h>
 
 #include <video/mipi_display.h>
@@ -59,8 +58,8 @@ struct panel_drv_data {
 	unsigned long	hw_guard_wait;	/* max guard time in jiffies */
 
 	/* panel HW configuration from DT or platform data */
-	int reset_gpio;
-	int ext_te_gpio;
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *ext_te_gpio;
 
 	struct regulator *vpnl;
 	struct regulator *vddi;
@@ -288,8 +287,8 @@ static int dsicm_enter_ulps(struct panel_drv_data *ddata)
 	if (r)
 		goto err;
 
-	if (gpio_is_valid(ddata->ext_te_gpio))
-		disable_irq(gpio_to_irq(ddata->ext_te_gpio));
+	if (ddata->ext_te_gpio)
+		disable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 
 	in->ops.dsi->disable(in, false, true);
 
@@ -330,8 +329,8 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 		goto err2;
 	}
 
-	if (gpio_is_valid(ddata->ext_te_gpio))
-		enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+	if (ddata->ext_te_gpio)
+		enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 
 	dsicm_queue_ulps_work(ddata);
 
@@ -344,8 +343,8 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 
 	r = dsicm_panel_reset(ddata);
 	if (!r) {
-		if (gpio_is_valid(ddata->ext_te_gpio))
-			enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+		if (ddata->ext_te_gpio)
+			enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 		ddata->ulps_enabled = false;
 	}
 err1:
@@ -591,16 +590,13 @@ static struct attribute_group dsicm_attr_group = {
 
 static void dsicm_hw_reset(struct panel_drv_data *ddata)
 {
-	if (!gpio_is_valid(ddata->reset_gpio))
-		return;
-
-	gpio_set_value(ddata->reset_gpio, 1);
+	gpiod_set_value(ddata->reset_gpio, 1);
 	udelay(10);
 	/* reset the panel */
-	gpio_set_value(ddata->reset_gpio, 0);
+	gpiod_set_value(ddata->reset_gpio, 0);
 	/* assert reset */
 	udelay(10);
-	gpio_set_value(ddata->reset_gpio, 1);
+	gpiod_set_value(ddata->reset_gpio, 1);
 	/* wait after releasing reset */
 	usleep_range(5000, 10000);
 }
@@ -954,7 +950,7 @@ static int dsicm_update(struct omap_dss_device *dssdev,
 	if (r)
 		goto err;
 
-	if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) {
+	if (ddata->te_enabled && ddata->ext_te_gpio) {
 		schedule_delayed_work(&ddata->te_timeout_work,
 				msecs_to_jiffies(250));
 		atomic_set(&ddata->do_update, 1);
@@ -1001,7 +997,7 @@ static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
 	else
 		r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF);
 
-	if (!gpio_is_valid(ddata->ext_te_gpio))
+	if (!ddata->ext_te_gpio)
 		in->ops.dsi->enable_te(in, enable);
 
 	/* possible panel bug */
@@ -1229,21 +1225,21 @@ static int dsicm_probe_of(struct platform_device *pdev)
 	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
 	struct omap_dss_device *in;
 	struct display_timing timing;
-	int gpio, err;
+	int err;
 
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&pdev->dev, "failed to parse reset gpio\n");
-		return gpio;
+	ddata->reset_gpio = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ddata->reset_gpio)) {
+		err = PTR_ERR(ddata->reset_gpio);
+		dev_err(&pdev->dev, "reset gpio request failed: %d", err);
+		return err;
 	}
-	ddata->reset_gpio = gpio;
 
-	gpio = of_get_named_gpio(node, "te-gpios", 0);
-	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
-		ddata->ext_te_gpio = gpio;
-	} else {
-		dev_err(&pdev->dev, "failed to parse TE gpio\n");
-		return gpio;
+	ddata->ext_te_gpio = devm_gpiod_get_optional(&pdev->dev, "te",
+						     GPIOD_IN);
+	if (IS_ERR(ddata->ext_te_gpio)) {
+		err = PTR_ERR(ddata->ext_te_gpio);
+		dev_err(&pdev->dev, "TE gpio request failed: %d", err);
+		return err;
 	}
 
 	err = of_get_display_timing(node, "panel-timing", &timing);
@@ -1353,24 +1349,8 @@ static int dsicm_probe(struct platform_device *pdev)
 
 	atomic_set(&ddata->do_update, 0);
 
-	if (gpio_is_valid(ddata->reset_gpio)) {
-		r = devm_gpio_request_one(dev, ddata->reset_gpio,
-				GPIOF_OUT_INIT_LOW, "taal rst");
-		if (r) {
-			dev_err(dev, "failed to request reset gpio\n");
-			goto err_reg;
-		}
-	}
-
-	if (gpio_is_valid(ddata->ext_te_gpio)) {
-		r = devm_gpio_request_one(dev, ddata->ext_te_gpio,
-				GPIOF_IN, "taal irq");
-		if (r) {
-			dev_err(dev, "GPIO request failed\n");
-			goto err_reg;
-		}
-
-		r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio),
+	if (ddata->ext_te_gpio) {
+		r = devm_request_irq(dev, gpiod_to_irq(ddata->ext_te_gpio),
 				dsicm_te_isr,
 				IRQF_TRIGGER_RISING,
 				"taal vsync", ddata);
-- 
2.13.2