[PATCH 1/2] drm/edid: Add helper to detect whether EDID changed

Paul Kocialkowski paul.kocialkowski at linux.intel.com
Tue Jul 25 07:58:55 UTC 2017


On Tue, 2017-07-25 at 09:34 +0200, Daniel Vetter wrote:
> On Tue, Jul 25, 2017 at 9:25 AM, Paul Kocialkowski
> <paul.kocialkowski at linux.intel.com> wrote:
> > On Tue, 2017-07-25 at 08:53 +0200, Daniel Vetter wrote:
> > > On Mon, Jul 24, 2017 at 05:54:46PM +0300, Paul Kocialkowski wrote:
> > > > This adds a common drm helper to detect whether the EDID changed
> > > > from
> > > > the last known cached one. This is useful help detect that a
> > > > monitor
> > > > was
> > > > changed during a suspend/resume cycle.
> > > > 
> > > > When that happens (a monitor is replaced by another one during
> > > > suspend),
> > > > no hotplug event will be triggered so the change will not be
> > > > caught
> > > > at
> > > > resume time. Detecting that the EDID changed allows detecting
> > > > it.
> > > > 
> > > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski at linux.intel.
> > > > com>
> > > 
> > > I can't find the older mails I've typed about this, but the plan
> > > we've
> > > discussed a while back was:
> > > - Add a generational counter to each connector, maybe even expose
> > > it
> > > to
> > >   userspace.
> > > 
> > > - Increment that counter every time something changed, e.g.
> > >   connector->status in the propbe helpers, or when attaching a new
> > > edid
> > >   with the set_edid helper.
> > > 
> > > - Tada, no changes needed to drivers, and easily extensible to
> > > other
> > >   things than edid!
> > 
> > I don't see how it solves the problem here though. After a
> > suspend/resume cycle, there is simply no indication that anything
> > has
> > changed when a monitor was replaced by another one, so I don't see
> > how
> > adding a counter in the mix would help.
> > 
> > Could you provide more details about the reasoning? I feel like I'm
> > missing something here.
> 
> Your bug doesn't just exist over s/r, it's just much easier to observe
> in s/r since users can take however long they want to with plugging in
> a different monitor. But the same issue exists e.g. when we go from
> hpd to polling because too much noise on the line.
> 
> Wrt the suspend/resume issue: What we need to do on resume is do a
> full reprobe of all outputs, in an async worker. Telling userspace to
> do this by sending an uevent was the cheapest way, but it'd be better
> if the kernel could do that asynchronously and inform userspace about
> the exact changes. And there's more to reprobe than just the edid, and
> we don't want to re-invent a separate reprobe path just for resume
> like you start in your patch series. So yeah my plan was missing:
> 
> - force a full async reprobe after resume (maybe we could reuse the
> poll worker for that as a one-shot).

First off, I definitely agree we need a way to tell userspace exactly
what has happened. I wanted to start a discussion about that in i-g-t
patch "Unrelated hotplug uevent masking out actual test result" but it
didn't get much traction. For testing purposes, it is unacceptable that
userspace only gets notified that "something happened".

Still, as far as I know, userspace is expected to ask for a full reprobe
when something has changed, and that is apparently part of the DRM spec,
so we can't expect that it could query for an update on "only the things
that changed".

However, one way to mitigate this is to make sure that the driver knows
what changed and only updates these things when a full reprobe is
requested. Is this the approach that you have in mind?

The methodology behind my series follows what is currently done: detect
change in whatever way necessary, inform userspace and let it trigger
full reprobe. If I'm understanding correctly, what you're suggesting is
instead to reprobe what is needed on the kernel side when an associated
change occurs instead of having userspace trigger it, and then let
userspace aware that something changed and return the "cached" updated
status when userspace asks for the subsequent reprobe. Is that correct?

Cheers,

Paul

> > > > ---
> > > >  drivers/gpu/drm/drm_edid.c | 45
> > > > +++++++++++++++++++++++++++++++++++++++++++++
> > > >  include/drm/drm_edid.h     |  3 +++
> > > >  2 files changed, 48 insertions(+)
> > > > 
> > > > diff --git a/drivers/gpu/drm/drm_edid.c
> > > > b/drivers/gpu/drm/drm_edid.c
> > > > index 6bb6337be920..f6ce8bc2907a 100644
> > > > --- a/drivers/gpu/drm/drm_edid.c
> > > > +++ b/drivers/gpu/drm/drm_edid.c
> > > > @@ -5036,3 +5036,48 @@ static void drm_get_displayid(struct
> > > > drm_connector *connector,
> > > >     }
> > > >     return;
> > > >  }
> > > > +
> > > > +/**
> > > > + * drm_check_edid_changed - Check whether the EDID changed
> > > > since
> > > > the last update
> > > > + * @connector: connector we're probing
> > > > + * @adapter: I2C adapter to use for DDC
> > > > + *
> > > > + * Check whether the EDID changed since the last time it was
> > > > updated in the
> > > > + * drm blob cache.
> > > > + *
> > > > + * Return: A boolean indicating whether a change happened or
> > > > not.
> > > > + */
> > > > +bool drm_check_edid_changed(struct drm_connector *connector,
> > > > +                       struct i2c_adapter *adapter)
> > > > +{
> > > > +   struct drm_property_blob *edid_blob;
> > > > +   struct edid *edid_stored;
> > > > +   struct edid *edid_read;
> > > > +   int ret = 0;
> > > > +
> > > > +   if (!connector->edid_blob_ptr)
> > > > +           return false;
> > > > +
> > > > +   edid_blob = drm_property_blob_get(connector-
> > > > > edid_blob_ptr);
> > > > 
> > > > +   if (!edid_blob)
> > > > +           return false;
> > > > +
> > > > +   if (!edid_blob->data || edid_blob->length != sizeof(struct
> > > > edid))
> > > > +           goto out;
> > > > +
> > > > +   edid_stored = (struct edid *) edid_blob->data;
> > > > +
> > > > +   edid_read = drm_get_edid(connector, adapter);
> > > > +   if (!edid_read)
> > > > +           goto out;
> > > > +
> > > > +   ret = memcmp(edid_stored, edid_read, sizeof(struct edid));
> > > > +
> > > > +   kfree(edid_read);
> > > > +
> > > > +out:
> > > > +   drm_property_blob_put(edid_blob);
> > > > +
> > > > +   return ret != 0;
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(drm_check_edid_changed);
> > > > diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> > > > index 1e1908a6b1d6..593a97b269c3 100644
> > > > --- a/include/drm/drm_edid.h
> > > > +++ b/include/drm/drm_edid.h
> > > > @@ -485,4 +485,7 @@ void drm_edid_get_monitor_name(struct edid
> > > > *edid, char *name,
> > > >  struct drm_display_mode *drm_mode_find_dmt(struct drm_device
> > > > *dev,
> > > >                                        int hsize, int vsize,
> > > > int fresh,
> > > >                                        bool rb);
> > > > +bool drm_check_edid_changed(struct drm_connector *connector,
> > > > +                       struct i2c_adapter *adapter);
> > > > +
> > > >  #endif /* __DRM_EDID_H__ */
> > > > --
> > > > 2.13.2
> > > > 
> > > > _______________________________________________
> > > > dri-devel mailing list
> > > > dri-devel at lists.freedesktop.org
> > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > > 
> > > 
> > 
> > --
> > Paul Kocialkowski <paul.kocialkowski at linux.intel.com>
> > Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo,
> > Finland
> 
> 
> 
-- 
Paul Kocialkowski <paul.kocialkowski at linux.intel.com>
Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo, Finland


More information about the dri-devel mailing list