[PATCH v3 0/3] Add support for the otm8009a dsi panel

[Philippe CORNU]

Hi Thierry,

The 2 dt-bindings patches have been "acked" by Rob.
The driver itself has been "reviewed" two times by Andrzej.

Do not hesitate to send me any comments so I can take them into account 
before my holidays (end of next week)...

Many thanks for your support,

Philippe :-)


On 07/17/2017 03:19 PM, Philippe CORNU wrote:
> Version 3:
> - panel-orisetech-otm8009a.c: Remove a FIXME (Andrzej Hajda)
> - panel/Makefile & Kconfig: Alphabetical order (Andrzej Hajda)
> 
> Version 2:
> - panel-orisetech-otm8009a.c: Add Manufacturer Command Set defines,
>    add new macro for handling address shifting, improve reset
>    sequence, use more mipi dcs helpers (Andrzej Hajda)
> - dt-bindings/display/panel/orisetech,otm8009a.txt: Fix reset gpio
>    active level in the example (Andrzej Hajda), Add an "Optional
>    Properties" section (Rob Herring).
> 
> Version 1:
> - Initial commit
> 
> The purpose of this patch is to add support for the Orise Tech
> otm8009a 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode).
> This LCD panel is used in several STM32 boards.
> 
> Philippe CORNU (3):
>    dt-bindings: Add vendor prefix for Orise Technology
>    dt-bindings: display: panel: Add support for Orise Tech otm8009a dsi
>      panel
>    drm/panel: Add support for otm8009a panel driver
> 
>   .../bindings/display/panel/orisetech,otm8009a.txt  |  21 +
>   .../devicetree/bindings/vendor-prefixes.txt        |   1 +
>   drivers/gpu/drm/panel/Kconfig                      |   9 +
>   drivers/gpu/drm/panel/Makefile                     |   1 +
>   drivers/gpu/drm/panel/panel-orisetech-otm8009a.c   | 491 +++++++++++++++++++++
>   5 files changed, 523 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
>   create mode 100755 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
>