[PATCH 6/6] drm/bridge: tc358767: fix 1-lane behavior
Andrey Gusakov
andrey.gusakov at cogentembedded.com
Thu Jul 27 12:47:36 UTC 2017
Use drm_dp_channel_eq_ok helper
Signed-off-by: Andrey Gusakov <andrey.gusakov at cogentembedded.com>
---
drivers/gpu/drm/bridge/tc358767.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 84b0b0fff854..24abffae6edb 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -819,8 +819,6 @@ static int tc_main_link_setup(struct tc_data *tc)
unsigned int rate;
u32 dp_phy_ctrl;
int timeout;
- bool aligned;
- bool ready;
u32 value;
int ret;
u8 tmp[8];
@@ -965,16 +963,15 @@ static int tc_main_link_setup(struct tc_data *tc)
ret = drm_dp_dpcd_read_link_status(aux, tmp + 2);
if (ret < 0)
goto err_dpcd_read;
- ready = (tmp[2] == ((DP_CHANNEL_EQ_BITS << 4) | /* Lane1 */
- DP_CHANNEL_EQ_BITS)); /* Lane0 */
- aligned = tmp[4] & DP_INTERLANE_ALIGN_DONE;
- } while ((--timeout) && !(ready && aligned));
+ } while ((--timeout) &&
+ !(drm_dp_channel_eq_ok(tmp + 2, tc->link.base.num_lanes)));
if (timeout == 0) {
/* Read DPCD 0x200-0x201 */
ret = drm_dp_dpcd_read(aux, DP_SINK_COUNT, tmp, 2);
if (ret < 0)
goto err_dpcd_read;
+ dev_err(dev, "channel(s) EQ not ok\n");
dev_info(dev, "0x0200 SINK_COUNT: 0x%02x\n", tmp[0]);
dev_info(dev, "0x0201 DEVICE_SERVICE_IRQ_VECTOR: 0x%02x\n",
tmp[1]);
@@ -985,10 +982,6 @@ static int tc_main_link_setup(struct tc_data *tc)
dev_info(dev, "0x0206 ADJUST_REQUEST_LANE0_1: 0x%02x\n",
tmp[6]);
- if (!ready)
- dev_err(dev, "Lane0/1 not ready\n");
- if (!aligned)
- dev_err(dev, "Lane0/1 not aligned\n");
return -EAGAIN;
}
--
2.13.0
More information about the dri-devel
mailing list