[PATCH v2 1/4] drm/bridge: dw-hdmi: add cec notifier support
Neil Armstrong
narmstrong at baylibre.com
Mon Jul 31 14:33:09 UTC 2017
On 07/31/2017 04:29 PM, Russell King wrote:
> Add CEC notifier support to the HDMI bridge driver, so that the CEC
> part of the IP can receive its physical address.
>
> Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
> ---
> drivers/gpu/drm/bridge/synopsys/Kconfig | 1 +
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 22 +++++++++++++++++++++-
> 2 files changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
> index 53e78d092d18..351db000599a 100644
> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig
> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
> @@ -2,6 +2,7 @@ config DRM_DW_HDMI
> tristate
> select DRM_KMS_HELPER
> select REGMAP_MMIO
> + select CEC_CORE if CEC_NOTIFIER
>
> config DRM_DW_HDMI_AHB_AUDIO
> tristate "Synopsys Designware AHB Audio interface"
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index ead11242c4b9..82e55ee8e4fa 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -36,7 +36,10 @@
> #include "dw-hdmi.h"
> #include "dw-hdmi-audio.h"
>
> +#include <media/cec-notifier.h>
> +
> #define DDC_SEGMENT_ADDR 0x30
> +
> #define HDMI_EDID_LEN 512
>
> enum hdmi_datamap {
> @@ -175,6 +178,8 @@ struct dw_hdmi {
> struct regmap *regm;
> void (*enable_audio)(struct dw_hdmi *hdmi);
> void (*disable_audio)(struct dw_hdmi *hdmi);
> +
> + struct cec_notifier *cec_notifier;
> };
>
> #define HDMI_IH_PHY_STAT0_RX_SENSE \
> @@ -1896,6 +1901,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
> hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
> hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
> drm_mode_connector_update_edid_property(connector, edid);
> + cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
> ret = drm_add_edid_modes(connector, edid);
> /* Store the ELD */
> drm_edid_to_eld(connector, edid);
> @@ -2119,11 +2125,16 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
> * ask the source to re-read the EDID.
> */
> if (intr_stat &
> - (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD))
> + (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) {
> __dw_hdmi_setup_rx_sense(hdmi,
> phy_stat & HDMI_PHY_HPD,
> phy_stat & HDMI_PHY_RX_SENSE);
>
> + if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0)
> + cec_notifier_set_phys_addr(hdmi->cec_notifier,
> + CEC_PHYS_ADDR_INVALID);
> + }
> +
> if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
> dev_dbg(hdmi->dev, "EVENT=%s\n",
> phy_int_pol & HDMI_PHY_HPD ? "plugin" : "plugout");
> @@ -2376,6 +2387,12 @@ __dw_hdmi_probe(struct platform_device *pdev,
> if (ret)
> goto err_iahb;
>
> + hdmi->cec_notifier = cec_notifier_get(dev);
> + if (!hdmi->cec_notifier) {
> + ret = -ENOMEM;
> + goto err_iahb;
> + }
> +
> /*
> * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
> * N and cts values before enabling phy
> @@ -2452,6 +2469,9 @@ __dw_hdmi_probe(struct platform_device *pdev,
> hdmi->ddc = NULL;
> }
>
> + if (hdmi->cec_notifier)
> + cec_notifier_put(hdmi->cec_notifier);
> +
> clk_disable_unprepare(hdmi->iahb_clk);
> err_isfr:
> clk_disable_unprepare(hdmi->isfr_clk);
>
Tested-by: Neil Armstrong <narmstrong at baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>
More information about the dri-devel
mailing list