[PATCH v2 0/4] dw-hdmi CEC support

[Russell King - ARM Linux]

Hi,

This series adds dw-hdmi CEC support.  This is done in four stages:

1. Add cec-notifier support
2. Fix up the clkdis register support, as this register contains a
   clock disable bit for the CEC module.
3. Add the driver.
4. Remove definitions that are not required from dw-hdmi.h

The CEC driver has been updated to use the register accessors in the
main driver - it would be nice if it was possible to use the regmap
support directly, but there's some knowledge private to the main
driver that's required to correctly access the registers.  (I don't
understand why the register stride isn't part of regmap.)

 drivers/gpu/drm/bridge/synopsys/Kconfig       |  10 +
 drivers/gpu/drm/bridge/synopsys/Makefile      |   1 +
 drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c | 326 ++++++++++++++++++++++++++
 drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.h |  19 ++
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c     |  93 +++++++-
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.h     |  46 +---
 6 files changed, 437 insertions(+), 58 deletions(-)

v2 - fix selection of CEC_NOTIFIER in Kconfig

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.