[PATCH v11 2/3] drm/i915: Add heuristic to determine better way to adjust brightness
Puthikorn Voravootivat
puthik at chromium.org
Sat Jun 3 02:04:57 UTC 2017
Add heuristic to decide that AUX or PWM pin should use for
backlight brightness adjustment and modify i915 param description
to have auto, force disable, and force enable.
The heuristic to determine that using AUX pin is better than using
PWM pin is that the panel support any of the feature list here.
- Regional backlight brightness adjustment
- Backlight PWM frequency set
- More than 8 bits resolution of brightness level
- Backlight enablement via AUX and not by BL_ENABLE pin
Change-Id: If8376b09fbf83398c40037a04ddba1035c6b71fc
Signed-off-by: Puthikorn Voravootivat <puthik at chromium.org>
---
drivers/gpu/drm/i915/i915_params.c | 7 +--
drivers/gpu/drm/i915/i915_params.h | 2 +-
drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 61 +++++++++++++++++++++++++--
3 files changed, 63 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index b6a7e363d076..3758ae1f11b4 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -63,7 +63,7 @@ struct i915_params i915 __read_mostly = {
.huc_firmware_path = NULL,
.enable_dp_mst = true,
.inject_load_failure = 0,
- .enable_dpcd_backlight = false,
+ .enable_dpcd_backlight = -1,
.enable_gvt = false,
};
@@ -246,9 +246,10 @@ MODULE_PARM_DESC(enable_dp_mst,
module_param_named_unsafe(inject_load_failure, i915.inject_load_failure, uint, 0400);
MODULE_PARM_DESC(inject_load_failure,
"Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)");
-module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, bool, 0600);
+module_param_named_unsafe(enable_dpcd_backlight, i915.enable_dpcd_backlight, int, 0600);
MODULE_PARM_DESC(enable_dpcd_backlight,
- "Enable support for DPCD backlight control (default:false)");
+ "Enable support for DPCD backlight control "
+ "(-1:auto (default), 0:force disable, 1:force enabled if supported");
module_param_named(enable_gvt, i915.enable_gvt, bool, 0400);
MODULE_PARM_DESC(enable_gvt,
diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h
index 34148cc8637c..643dfaf41c1f 100644
--- a/drivers/gpu/drm/i915/i915_params.h
+++ b/drivers/gpu/drm/i915/i915_params.h
@@ -52,6 +52,7 @@
func(int, mmio_debug); \
func(int, edp_vswing); \
func(unsigned int, inject_load_failure); \
+ func(int, enable_dpcd_backlight); \
/* leave bools at the end to not create holes */ \
func(bool, alpha_support); \
func(bool, enable_cmd_parser); \
@@ -66,7 +67,6 @@
func(bool, verbose_state_checks); \
func(bool, nuclear_pageflip); \
func(bool, enable_dp_mst); \
- func(bool, enable_dpcd_backlight); \
func(bool, enable_gvt)
#define MEMBER(T, member) T member
diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
index 6c64e1f75c4e..b73b3d431a82 100644
--- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
@@ -250,15 +250,66 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector)
/* Check the eDP Display control capabilities registers to determine if
* the panel can support backlight control over the aux channel
*/
- if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
- (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) &&
- !(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) {
+ if ((intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) &&
+ (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) {
DRM_DEBUG_KMS("AUX Backlight Control Supported!\n");
return true;
}
return false;
}
+/*
+ * Heuristic function whether we should use AUX for backlight adjustment or not.
+ *
+ * We should use AUX for backlight brightness adjustment if panel doesn't this
+ * via PWM pin or using AUX is better than using PWM pin.
+ *
+ * The heuristic to determine that using AUX pin is better than using PWM pin is
+ * that the panel support any of the feature list here.
+ * - Regional backlight brightness adjustment
+ * - Backlight PWM frequency set
+ * - More than 8 bits resolution of brightness level
+ * - Backlight enablement via AUX and not by BL_ENABLE pin
+ *
+ * If all above are not true, assume that using PWM pin is better.
+ */
+static bool
+intel_dp_aux_display_control_heuristic(struct intel_connector *connector)
+{
+ struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
+ uint8_t reg_val;
+
+ /* Panel doesn't support adjusting backlight brightness via PWN pin */
+ if (!(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP))
+ return true;
+
+ /* Panel supports regional backlight brightness adjustment */
+ if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_GENERAL_CAP_3,
+ ®_val) != 1) {
+ DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
+ DP_EDP_GENERAL_CAP_3);
+ return false;
+ }
+ if (reg_val > 0)
+ return true;
+
+ /* Panel supports backlight PWM frequency set */
+ if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP)
+ return true;
+
+ /* Panel supports more than 8 bits resolution of brightness level */
+ if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
+ return true;
+
+ /* Panel supports enabling backlight via AUX but not by BL_ENABLE pin */
+ if ((intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP) &&
+ !(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_PIN_ENABLE_CAP))
+ return true;
+
+ return false;
+
+}
+
int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
{
struct intel_panel *panel = &intel_connector->panel;
@@ -269,6 +320,10 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
if (!intel_dp_aux_display_control_capable(intel_connector))
return -ENODEV;
+ if (i915.enable_dpcd_backlight == -1 &&
+ !intel_dp_aux_display_control_heuristic(intel_connector))
+ return -ENODEV;
+
panel->backlight.setup = intel_dp_aux_setup_backlight;
panel->backlight.enable = intel_dp_aux_enable_backlight;
panel->backlight.disable = intel_dp_aux_disable_backlight;
--
2.13.0.506.g27d5fe0cd-goog
More information about the dri-devel
mailing list