[PATCH 1/2] drm/fsl-dcu: implement irq_preinstall/uninstall callbacks
Stefan Agner
stefan at agner.ch
Thu Jun 8 21:57:40 UTC 2017
On 2017-06-01 20:00, Stefan Agner wrote:
> Make use of the irq_preinstall/uninstall callback to clear and
> mask all interrupts. Use write 1 to clear as documented by the
> data sheet (writing a 0 seems to have cleared interrupt status
> too). Remove fsl_dcu_drm_irq_init and call drm_irq_install
> directly from fsl_dcu_load makes error handling a bit simpler.
> Do not set irq_enabled since drm_irq_install is taking care of
> it.
>
> Signed-off-by: Stefan Agner <stefan at agner.ch>
Applied to my fsl-dcu branch for 4.13.
--
Stefan
> ---
> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 20 ++++++++------------
> 1 file changed, 8 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> index 6e00f4b..d86f35c 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> @@ -51,19 +51,12 @@ static const struct regmap_config fsl_dcu_regmap_config = {
> .volatile_reg = fsl_dcu_drm_is_volatile_reg,
> };
>
> -static int fsl_dcu_drm_irq_init(struct drm_device *dev)
> +static void fsl_dcu_irq_uninstall(struct drm_device *dev)
> {
> struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> - int ret;
> -
> - ret = drm_irq_install(dev, fsl_dev->irq);
> - if (ret < 0)
> - dev_err(dev->dev, "failed to install IRQ handler\n");
>
> - regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0);
> + regmap_write(fsl_dev->regmap, DCU_INT_STATUS, ~0);
> regmap_write(fsl_dev->regmap, DCU_INT_MASK, ~0);
> -
> - return ret;
> }
>
> static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
> @@ -83,10 +76,11 @@ static int fsl_dcu_load(struct drm_device *dev,
> unsigned long flags)
> goto done;
> }
>
> - ret = fsl_dcu_drm_irq_init(dev);
> - if (ret < 0)
> + ret = drm_irq_install(dev, fsl_dev->irq);
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to install IRQ handler\n");
> goto done;
> - dev->irq_enabled = true;
> + }
>
> if (legacyfb_depth != 16 && legacyfb_depth != 24 &&
> legacyfb_depth != 32) {
> @@ -170,6 +164,8 @@ static struct drm_driver fsl_dcu_drm_driver = {
> .load = fsl_dcu_load,
> .unload = fsl_dcu_unload,
> .irq_handler = fsl_dcu_drm_irq,
> + .irq_preinstall = fsl_dcu_irq_uninstall,
> + .irq_uninstall = fsl_dcu_irq_uninstall,
> .gem_free_object_unlocked = drm_gem_cma_free_object,
> .gem_vm_ops = &drm_gem_cma_vm_ops,
> .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
>
> base-commit: 2a1720376adda5ecf8e636fbfb05339c7dad1c55
More information about the dri-devel
mailing list