[linux-sunxi] Re: [PATCH v2 01/11] dt-bindings: update the binding for Allwinner H3 TVE support

[Maxime Ripard]

On Sat, Jun 10, 2017 at 12:51:02AM +0800, Icenowy Zheng wrote:
> 
> 
> 于 2017年6月10日 GMT+08:00 上午12:49:15, Maxime Ripard <maxime.ripard at free-electrons.com> 写到:
> >On Wed, Jun 07, 2017 at 04:48:50PM +0800, Icenowy Zheng wrote:
> >> >> @@ -189,6 +211,8 @@ supported.
> >> >>  Required properties:
> >> >>    - compatible: value must be one of:
> >> >>      * allwinner,sun8i-v3s-de2-mixer
> >> >> +    * allwinner,sun8i-h3-de2-mixer0
> >> >> +    * allwinner,sun8i-h3-de2-mixer1
> >> >
> >> >Again, please explain why we need to have different compatibles
> >> >here. If it's only about the number of planes, this should be dealt
> >> >with a property, not a compatible.
> >> 
> >> Only mixer0 has "VEP" and write-back support, at least on H3.
> >
> >What is that VEP? writeback support can also be expressed by a
> >property.
> 
> I don't know what VEP is...

Ok. Let's forget about it at the moment then, especially if it's
optional, we can add support for it later.

> But we are really facing different cores, like sun50i-a64-mmc
> and sun50i-a64-emmc.

Not really. The eMMC and MMC controllers are *very* different. They
behave (slightly) differently, the eMMC controller has more signals
(8-bit bus, data strobe), can run at a higher frequency. You cannot
have exactly the same driver (or rather code path) to handle
both. Therefore the need for some other compatible.

This is not the case for the mixer here. The thing that differs
between instances is not behaviour but data. And we provide most of
the data through DT.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20170613/d698086e/attachment-0001.sig>