[PATCH 1/1] drm/mgag200: Fix to always set HiPri for G200e4

[mathieu.larouche at matrox.com]

From: Mathieu Larouche <mathieu.larouche at matrox.com>

  - Changed the HiPri value for G200e4 to always be 0.
  - Added Bandwith limitation to block resolution above 1920x1200x60Hz
---
 drivers/gpu/drm/mgag200/mgag200_mode.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index 6b21cb2..292e8eb 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1133,7 +1133,10 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
 
 
 	if (IS_G200_SE(mdev)) {
-		if (mdev->unique_rev_id >= 0x02) {
+		if  (mdev->unique_rev_id >= 0x04) {
+			WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
+			WREG8(MGAREG_CRTCEXT_DATA, 0);
+		} else if (mdev->unique_rev_id >= 0x02) {
 			u8 hi_pri_lvl;
 			u32 bpp;
 			u32 mb;
@@ -1598,6 +1601,10 @@ static int mga_vga_mode_valid(struct drm_connector *connector,
 			if (mga_vga_calculate_mode_bandwidth(mode, bpp)
 				> (30100 * 1024))
 				return MODE_BANDWIDTH;
+		} else {
+			if (mga_vga_calculate_mode_bandwidth(mode, bpp) 
+				> (55000 * 1024)) 
+				return MODE_BANDWIDTH;
 		}
 	} else if (mdev->type == G200_WB) {
 		if (mode->hdisplay > 1280)
-- 
1.8.3.1