[PATCH v3] drm/sun4i: hdmi: Implement I2C adapter for A10s DDC bus

Maxime Ripard maxime.ripard at free-electrons.com
Wed Jun 21 08:51:59 UTC 2017


On Thu, Jun 15, 2017 at 01:29:33AM +1000, Jonathan Liu wrote:
> The documentation for drm_do_get_edid in drivers/gpu/drm/drm_edid.c states:
> "As in the general case the DDC bus is accessible by the kernel at the I2C
> level, drivers must make all reasonable efforts to expose it as an I2C
> adapter and use drm_get_edid() instead of abusing this function."
> 
> Exposing the DDC bus as an I2C adapter is more beneficial as it can be used
> for purposes other than reading the EDID such as modifying the EDID or
> using the HDMI DDC pins as an I2C bus through the I2C dev interface from
> userspace (e.g. i2c-tools).
> 
> Implement this for A10s.
> 
> Signed-off-by: Jonathan Liu <net147 at gmail.com>
> ---
> Changes for v3:
>  - Explain why drm_do_get_edid should be used and why it's better to expose it
>    as an I2C adapter in commit message
>  - Reorder bit defines in descending order for consistency
>  - Keep old unused macros instead of removing them
>  - The v2 algorithm split large transfers into 16 byte transfers but this may
>    cause a large single write to be treated as multiple writes causing data
>    corruption. The algorithm has been reworked to not split larger transfers
>    and make more use of the FIFO to avoid this.
>  - Moved the creation of the DDC clock from sun4i_hdmi_enc.c to
>    sun4i_hdmi_i2c.c
>  - Reformatted code
>  - Instead of masking bits that we don't want to check for errors, explicitly
>    check the error bits
>  - Clear error bits at start of transfer in case of error from previous transfer
>  - Poll for completion of FIFO clear after setting FIFO clear bit
> 
> Changes for v2:
>  - Rebased against Maxime's sunxi-drm/for-next branch
>  - Fix up error paths in sun4i_hdmi_bind so that the I2C adapter is deleted if
>    any of the calls after the I2C adapter is created fails
>  - Remove unnecessary includes in sun4i_hdmi_i2c.c
> 
>  drivers/gpu/drm/sun4i/Makefile         |   1 +
>  drivers/gpu/drm/sun4i/sun4i_hdmi.h     |  21 ++++
>  drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 101 ++-------------
>  drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c | 220 +++++++++++++++++++++++++++++++++
>  4 files changed, 253 insertions(+), 90 deletions(-)
>  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c
> 
> diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
> index e29fd3a2ba9c..43c753cafc88 100644
> --- a/drivers/gpu/drm/sun4i/Makefile
> +++ b/drivers/gpu/drm/sun4i/Makefile
> @@ -2,6 +2,7 @@ sun4i-drm-y += sun4i_drv.o
>  sun4i-drm-y += sun4i_framebuffer.o
>  
>  sun4i-drm-hdmi-y += sun4i_hdmi_enc.o
> +sun4i-drm-hdmi-y += sun4i_hdmi_i2c.o
>  sun4i-drm-hdmi-y += sun4i_hdmi_ddc_clk.o
>  sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o
>  
> diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
> index 2f2f2ff1ea63..018af9cbb593 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_hdmi.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
> @@ -96,6 +96,7 @@
>  #define SUN4I_HDMI_DDC_CTRL_ENABLE		BIT(31)
>  #define SUN4I_HDMI_DDC_CTRL_START_CMD		BIT(30)
>  #define SUN4I_HDMI_DDC_CTRL_FIFO_DIR_MASK	BIT(8)
> +#define SUN4I_HDMI_DDC_CTRL_FIFO_DIR_WRITE	(1 << 8)
>  #define SUN4I_HDMI_DDC_CTRL_FIFO_DIR_READ	(0 << 8)
>  #define SUN4I_HDMI_DDC_CTRL_RESET		BIT(0)
>  
> @@ -105,14 +106,30 @@
>  #define SUN4I_HDMI_DDC_ADDR_OFFSET(off)		(((off) & 0xff) << 8)
>  #define SUN4I_HDMI_DDC_ADDR_SLAVE(addr)		((addr) & 0xff)
>  
> +#define SUN4I_HDMI_DDC_INT_STATUS_REG	0x50c
> +#define SUN4I_HDMI_DDC_INT_STATUS_ILLEGAL_FIFO_OPERATION	BIT(7)
> +#define SUN4I_HDMI_DDC_INT_STATUS_DDC_RX_FIFO_UNDERFLOW	BIT(6)
> +#define SUN4I_HDMI_DDC_INT_STATUS_DDC_TX_FIFO_UNDERFLOW	BIT(5)
> +#define SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST	BIT(4)
> +#define SUN4I_HDMI_DDC_INT_STATUS_ARBITRATION_ERROR	BIT(3)
> +#define SUN4I_HDMI_DDC_INT_STATUS_ACK_ERROR	BIT(2)
> +#define SUN4I_HDMI_DDC_INT_STATUS_BUS_ERROR	BIT(1)
> +#define SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE	BIT(0)
> +
>  #define SUN4I_HDMI_DDC_FIFO_CTRL_REG	0x510
>  #define SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR		BIT(31)
>  
> +#define SUN4I_HDMI_DDC_FIFO_STATUS_REG	0x514
> +#define SUN4I_HDMI_DDC_FIFO_STATUS_FULL	BIT(6)
> +#define SUN4I_HDMI_DDC_FIFO_STATUS_EMPTY	BIT(5)
> +

The indentation of those bits and the ones above are weird, please
check them.

>  #define SUN4I_HDMI_DDC_FIFO_DATA_REG	0x518
>  #define SUN4I_HDMI_DDC_BYTE_COUNT_REG	0x51c
>  
>  #define SUN4I_HDMI_DDC_CMD_REG		0x520
>  #define SUN4I_HDMI_DDC_CMD_EXPLICIT_EDDC_READ	6
> +#define SUN4I_HDMI_DDC_CMD_IMPLICIT_READ	5
> +#define SUN4I_HDMI_DDC_CMD_IMPLICIT_WRITE	3
>  
>  #define SUN4I_HDMI_DDC_CLK_REG		0x528
>  #define SUN4I_HDMI_DDC_CLK_M(m)			(((m) & 0x7) << 3)
> @@ -123,6 +140,7 @@
>  #define SUN4I_HDMI_DDC_LINE_CTRL_SCL_ENABLE	BIT(8)
>  
>  #define SUN4I_HDMI_DDC_FIFO_SIZE	16
> +#define SUN4I_HDMI_DDC_MAX_TRANSFER_SIZE   1023

Where is that limit mentionned ?

>  
>  enum sun4i_hdmi_pkt_type {
>  	SUN4I_HDMI_PKT_AVI = 2,
> @@ -146,6 +164,8 @@ struct sun4i_hdmi {
>  	struct clk		*ddc_clk;
>  	struct clk		*tmds_clk;
>  
> +	struct i2c_adapter	*i2c;
> +
>  	struct sun4i_drv	*drv;
>  
>  	bool			hdmi_monitor;
> @@ -153,5 +173,6 @@ struct sun4i_hdmi {
>  
>  int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *clk);
>  int sun4i_tmds_create(struct sun4i_hdmi *hdmi);
> +int sun4i_hdmi_i2c_create(struct sun4i_hdmi *hdmi);
>  
>  #endif /* _SUN4I_HDMI_H_ */
> diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> index d3398f6250ef..57a9a7a13e02 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> @@ -29,8 +29,6 @@
>  #include "sun4i_hdmi.h"
>  #include "sun4i_tcon.h"
>  
> -#define DDC_SEGMENT_ADDR	0x30
> -
>  static inline struct sun4i_hdmi *
>  drm_encoder_to_sun4i_hdmi(struct drm_encoder *encoder)
>  {
> @@ -184,93 +182,13 @@ static const struct drm_encoder_funcs sun4i_hdmi_funcs = {
>  	.destroy	= drm_encoder_cleanup,
>  };
>  
> -static int sun4i_hdmi_read_sub_block(struct sun4i_hdmi *hdmi,
> -				     unsigned int blk, unsigned int offset,
> -				     u8 *buf, unsigned int count)
> -{
> -	unsigned long reg;
> -	int i;
> -
> -	reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> -	reg &= ~SUN4I_HDMI_DDC_CTRL_FIFO_DIR_MASK;
> -	writel(reg | SUN4I_HDMI_DDC_CTRL_FIFO_DIR_READ,
> -	       hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> -
> -	writel(SUN4I_HDMI_DDC_ADDR_SEGMENT(offset >> 8) |
> -	       SUN4I_HDMI_DDC_ADDR_EDDC(DDC_SEGMENT_ADDR << 1) |
> -	       SUN4I_HDMI_DDC_ADDR_OFFSET(offset) |
> -	       SUN4I_HDMI_DDC_ADDR_SLAVE(DDC_ADDR),
> -	       hdmi->base + SUN4I_HDMI_DDC_ADDR_REG);
> -
> -	reg = readl(hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
> -	writel(reg | SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR,
> -	       hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
> -
> -	writel(count, hdmi->base + SUN4I_HDMI_DDC_BYTE_COUNT_REG);
> -	writel(SUN4I_HDMI_DDC_CMD_EXPLICIT_EDDC_READ,
> -	       hdmi->base + SUN4I_HDMI_DDC_CMD_REG);
> -
> -	reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> -	writel(reg | SUN4I_HDMI_DDC_CTRL_START_CMD,
> -	       hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> -
> -	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG, reg,
> -			       !(reg & SUN4I_HDMI_DDC_CTRL_START_CMD),
> -			       100, 100000))
> -		return -EIO;
> -
> -	for (i = 0; i < count; i++)
> -		buf[i] = readb(hdmi->base + SUN4I_HDMI_DDC_FIFO_DATA_REG);
> -
> -	return 0;
> -}
> -
> -static int sun4i_hdmi_read_edid_block(void *data, u8 *buf, unsigned int blk,
> -				      size_t length)
> -{
> -	struct sun4i_hdmi *hdmi = data;
> -	int retry = 2, i;
> -
> -	do {
> -		for (i = 0; i < length; i += SUN4I_HDMI_DDC_FIFO_SIZE) {
> -			unsigned char offset = blk * EDID_LENGTH + i;
> -			unsigned int count = min((unsigned int)SUN4I_HDMI_DDC_FIFO_SIZE,
> -						 length - i);
> -			int ret;
> -
> -			ret = sun4i_hdmi_read_sub_block(hdmi, blk, offset,
> -							buf + i, count);
> -			if (ret)
> -				return ret;
> -		}
> -	} while (!drm_edid_block_valid(buf, blk, true, NULL) && (retry--));
> -
> -	return 0;
> -}
> -
>  static int sun4i_hdmi_get_modes(struct drm_connector *connector)
>  {
>  	struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
> -	unsigned long reg;
>  	struct edid *edid;
>  	int ret;
>  
> -	/* Reset i2c controller */
> -	writel(SUN4I_HDMI_DDC_CTRL_ENABLE | SUN4I_HDMI_DDC_CTRL_RESET,
> -	       hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> -	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG, reg,
> -			       !(reg & SUN4I_HDMI_DDC_CTRL_RESET),
> -			       100, 2000))
> -		return -EIO;
> -
> -	writel(SUN4I_HDMI_DDC_LINE_CTRL_SDA_ENABLE |
> -	       SUN4I_HDMI_DDC_LINE_CTRL_SCL_ENABLE,
> -	       hdmi->base + SUN4I_HDMI_DDC_LINE_CTRL_REG);
> -
> -	clk_prepare_enable(hdmi->ddc_clk);
> -	clk_set_rate(hdmi->ddc_clk, 100000);
> -
> -	edid = drm_do_get_edid(connector, sun4i_hdmi_read_edid_block, hdmi);
> +	edid = drm_get_edid(connector, hdmi->i2c);
>  	if (!edid)
>  		return 0;
>  
> @@ -282,8 +200,6 @@ static int sun4i_hdmi_get_modes(struct drm_connector *connector)
>  	ret = drm_add_edid_modes(connector, edid);
>  	kfree(edid);
>  
> -	clk_disable_unprepare(hdmi->ddc_clk);
> -
>  	return ret;
>  }
>  
> @@ -407,9 +323,9 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
>  		SUN4I_HDMI_PLL_CTRL_PLL_EN;
>  	writel(reg, hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
>  
> -	ret = sun4i_ddc_create(hdmi, hdmi->tmds_clk);
> +	ret = sun4i_hdmi_i2c_create(hdmi);
>  	if (ret) {
> -		dev_err(dev, "Couldn't create the DDC clock\n");
> +		dev_err(dev, "Couldn't create the HDMI I2C adapter\n");
>  		return ret;
>  	}
>  
> @@ -422,13 +338,15 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
>  			       NULL);
>  	if (ret) {
>  		dev_err(dev, "Couldn't initialise the HDMI encoder\n");
> -		return ret;
> +		goto err_del_i2c_adapter;
>  	}
>  
>  	hdmi->encoder.possible_crtcs = drm_of_find_possible_crtcs(drm,
>  								  dev->of_node);
> -	if (!hdmi->encoder.possible_crtcs)
> -		return -EPROBE_DEFER;
> +	if (!hdmi->encoder.possible_crtcs) {
> +		ret = -EPROBE_DEFER;
> +		goto err_del_i2c_adapter;
> +	}
>  
>  	drm_connector_helper_add(&hdmi->connector,
>  				 &sun4i_hdmi_connector_helper_funcs);
> @@ -451,6 +369,8 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
>  
>  err_cleanup_connector:
>  	drm_encoder_cleanup(&hdmi->encoder);
> +err_del_i2c_adapter:
> +	i2c_del_adapter(hdmi->i2c);
>  	return ret;
>  }
>  
> @@ -461,6 +381,7 @@ static void sun4i_hdmi_unbind(struct device *dev, struct device *master,
>  
>  	drm_connector_cleanup(&hdmi->connector);
>  	drm_encoder_cleanup(&hdmi->encoder);
> +	i2c_del_adapter(hdmi->i2c);
>  }
>  
>  static const struct component_ops sun4i_hdmi_ops = {
> diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c
> new file mode 100644
> index 000000000000..e82fa8a55165
> --- /dev/null
> +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c
> @@ -0,0 +1,220 @@
> +/*
> + * Copyright (C) 2017 Jonathan Liu
> + *
> + * Jonathan Liu <net147 at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/i2c.h>
> +#include <linux/iopoll.h>
> +#include <linux/ktime.h>
> +
> +#include "sun4i_hdmi.h"
> +
> +#define SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK ( \
> +	SUN4I_HDMI_DDC_INT_STATUS_ILLEGAL_FIFO_OPERATION | \
> +	SUN4I_HDMI_DDC_INT_STATUS_DDC_RX_FIFO_UNDERFLOW | \
> +	SUN4I_HDMI_DDC_INT_STATUS_DDC_TX_FIFO_UNDERFLOW | \
> +	SUN4I_HDMI_DDC_INT_STATUS_ARBITRATION_ERROR | \
> +	SUN4I_HDMI_DDC_INT_STATUS_ACK_ERROR | \
> +	SUN4I_HDMI_DDC_INT_STATUS_BUS_ERROR \
> +)
> +
> +static int wait_fifo_flag_unset(struct sun4i_hdmi *hdmi, u32 flag)
> +{
> +	/* 1 byte takes 9 clock cycles (8 bits + 1 ack) */
> +	unsigned long byte_time = DIV_ROUND_UP(USEC_PER_SEC,
> +					       clk_get_rate(hdmi->ddc_clk)) * 9;
> +	ktime_t wait_timeout = ktime_add_us(ktime_get(), 100000);
> +	u32 reg;
> +
> +	for (;;) {
> +		/* Check for errors */
> +		reg = readl(hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
> +		if (reg & SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK) {
> +			writel(reg, hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
> +			return -EIO;
> +		}
> +
> +		/* Check if requested FIFO flag is unset */
> +		reg = readl(hdmi->base + SUN4I_HDMI_DDC_FIFO_STATUS_REG);
> +		if (!(reg & flag))
> +			return 0;
> +
> +		/* Timeout */
> +		if (ktime_compare(ktime_get(), wait_timeout) > 0)
> +			return -EIO;
> +
> +		/* Wait for 1-2 bytes to transfer */
> +		usleep_range(byte_time, 2 * byte_time);
> +	}
> +
> +	return -EIO;
> +}
> +
> +static int wait_fifo_read_ready(struct sun4i_hdmi *hdmi)
> +{
> +	return wait_fifo_flag_unset(hdmi, SUN4I_HDMI_DDC_FIFO_STATUS_EMPTY);
> +}
> +
> +static int wait_fifo_write_ready(struct sun4i_hdmi *hdmi)
> +{
> +	return wait_fifo_flag_unset(hdmi, SUN4I_HDMI_DDC_FIFO_STATUS_FULL);
> +}

Both of these can use readl_poll_timeout, and I'm not sure you need to
be that aggressive in your timings.

> +
> +static int xfer_msg(struct sun4i_hdmi *hdmi, struct i2c_msg *msg)
> +{
> +	u32 reg;
> +	int i;
> +
> +	reg = readl(hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
> +	reg &= ~SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK;
> +	writel(reg, hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
> +
> +	reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> +	reg &= ~SUN4I_HDMI_DDC_CTRL_FIFO_DIR_MASK;
> +	reg |= (msg->flags & I2C_M_RD) ?
> +	       SUN4I_HDMI_DDC_CTRL_FIFO_DIR_READ :
> +	       SUN4I_HDMI_DDC_CTRL_FIFO_DIR_WRITE;
> +	writel(reg, hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> +
> +	writel(SUN4I_HDMI_DDC_ADDR_SLAVE(msg->addr),
> +	       hdmi->base + SUN4I_HDMI_DDC_ADDR_REG);
> +
> +	reg = readl(hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
> +	writel(reg | SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR,
> +	       hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
> +
> +	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG,
> +			       reg,
> +			       !(reg & SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR),
> +			       100, 100000))
> +		return -EIO;
> +
> +	writel(msg->len, hdmi->base + SUN4I_HDMI_DDC_BYTE_COUNT_REG);
> +	writel(msg->flags & I2C_M_RD ?
> +	       SUN4I_HDMI_DDC_CMD_IMPLICIT_READ :
> +	       SUN4I_HDMI_DDC_CMD_IMPLICIT_WRITE,
> +	       hdmi->base + SUN4I_HDMI_DDC_CMD_REG);
> +
> +	reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> +	writel(reg | SUN4I_HDMI_DDC_CTRL_START_CMD,
> +	       hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> +
> +	if (msg->flags & I2C_M_RD) {
> +		for (i = 0; i < msg->len; i++) {
> +			if (wait_fifo_read_ready(hdmi))
> +				return -EIO;

it seems weird that a function called read_ready would return 1 if
there's an error.

> +
> +			*msg->buf++ = readb(hdmi->base +
> +					    SUN4I_HDMI_DDC_FIFO_DATA_REG);

Don't you have an hardware FIFO you can rely on intead of reading
everything byte per byte?

> +		}
> +	} else {
> +		for (i = 0; i < msg->len; i++) {
> +			if (wait_fifo_write_ready(hdmi))
> +				return -EIO;
> +
> +			writeb(*msg->buf++, hdmi->base +
> +			       SUN4I_HDMI_DDC_FIFO_DATA_REG);
> +		}
> +	}
> +
> +	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG,
> +			       reg,
> +			       !(reg & SUN4I_HDMI_DDC_CTRL_START_CMD),
> +			       100, 100000))
> +		return -EIO;
> +
> +	reg = readl(hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
> +
> +	/* Check for errors */
> +	if ((reg & SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK) ||
> +	    !(reg & SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE)) {
> +		writel(reg, hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static int sun4i_hdmi_i2c_xfer(struct i2c_adapter *adap,
> +			       struct i2c_msg *msgs, int num)
> +{
> +	struct sun4i_hdmi *hdmi = i2c_get_adapdata(adap);
> +	u32 reg;
> +	int err, i, ret = num;
> +
> +	for (i = 0; i < num; i++) {
> +		if (!msgs[i].len)
> +			return -EINVAL;
> +		if (msgs[i].len > SUN4I_HDMI_DDC_MAX_TRANSFER_SIZE)
> +			return -EINVAL;
> +	}
> +
> +	/* Reset I2C controller */
> +	writel(SUN4I_HDMI_DDC_CTRL_ENABLE | SUN4I_HDMI_DDC_CTRL_RESET,
> +	       hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> +	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG, reg,
> +			       !(reg & SUN4I_HDMI_DDC_CTRL_RESET),
> +			       100, 2000))
> +		return -EIO;
> +
> +	writel(SUN4I_HDMI_DDC_LINE_CTRL_SDA_ENABLE |
> +	       SUN4I_HDMI_DDC_LINE_CTRL_SCL_ENABLE,
> +	       hdmi->base + SUN4I_HDMI_DDC_LINE_CTRL_REG);
> +
> +	clk_prepare_enable(hdmi->ddc_clk);
> +	clk_set_rate(hdmi->ddc_clk, 100000);
> +
> +	for (i = 0; i < num; i++) {
> +		err = xfer_msg(hdmi, &msgs[i]);
> +		if (err) {
> +			ret = err;
> +			break;
> +		}
> +	}
> +
> +	clk_disable_unprepare(hdmi->ddc_clk);
> +	return ret;
> +}
> +
> +static u32 sun4i_hdmi_i2c_func(struct i2c_adapter *adap)
> +{
> +	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> +}
> +
> +static const struct i2c_algorithm sun4i_hdmi_i2c_algorithm = {
> +	.master_xfer	= sun4i_hdmi_i2c_xfer,
> +	.functionality	= sun4i_hdmi_i2c_func,
> +};
> +
> +static struct i2c_adapter sun4i_hdmi_i2c_adapter = {
> +	.owner	= THIS_MODULE,
> +	.class	= I2C_CLASS_DDC,
> +	.algo	= &sun4i_hdmi_i2c_algorithm,
> +	.name	= "sun4i_hdmi_i2c adapter",
> +};

const?

(plus the changes mentionned in the v2 I just replied to, if they
still apply).

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20170621/d32cf3ec/attachment-0001.sig>


More information about the dri-devel mailing list