[PATCH v5 0/2] drm: atmel-hlcdc: clut support

[Nicolas Ferre]

On 22/06/2017 at 07:03, Peter Rosin wrote:
> Hi!
> 
> This series adds support for an 8-bit clut mode in the atmel-hlcdc
> driver.
> 
> Changes since v4:
> 
> - Added .clut_offset for overlay2 at 0xe00 for sama5d4 (unconfirmed if 0xe00
>   is the correct offset, but I'll eat my hat if it's not there).

You hat is safe and so you are: I confirm that overlay2 clut is at 0xe00
based on an older datasheet.

Regards,

>   The sama5d4
>   overlay2 is indeed there, it is just AWOL in the current datasheet.
> - Added Acked-by from Daniel on patch 2/2.
> 
> Changes since v3:
> 
> - Dropped ugly code (patches 2/3 and 3/3) for legacy fbdev interaction.
> - Slit out the .set_property change to a patch of its own.
> 
> Changes since v2:
> 
> - Fix mapping to the clut registers.
> 
> Changes since v1:
> 
> - Move the clut update from atmel_hlcdc_crtc_mode_valid to
>   atmel_hlcdc_plane_atomic_update.
> - Add default .gamma_set helper (drm_atomic_helper_legacy_gamma_set).
> - Don't keep a spare copy of the clut, reuse gamma_store instead.
> - Don't try to synchronize the legacy fb clut with the drm clut.
> 
> Cheers,
> peda
> 
> Peter Rosin (2):
>   drm: atmel-hlcdc: add missing .set_property helper to the crtc
>   drm: atmel-hlcdc: add support for 8-bit color lookup table mode
> 
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c  |  5 +++++
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c    | 14 ++++++++++++
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h    | 16 ++++++++++++++
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 29 +++++++++++++++++++++++++
>  4 files changed, 64 insertions(+)
> 


-- 
Nicolas Ferre