[PATCH v4 6/6] drm/stm: Add STM32 DSI host driver

Archit Taneja architt at codeaurora.org
Wed Jun 28 06:48:05 UTC 2017



On 06/19/2017 09:58 PM, Philippe CORNU wrote:
> Add the STM32 DSI host driver that uses the Synopsys DesignWare
> MIPI DSI DRM bridge.
> 
> Signed-off-by: Philippe CORNU <philippe.cornu at st.com>
> Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>

Reviewed-by: Archit Taneja <architt at codeaurora.org>

> ---
>   drivers/gpu/drm/stm/Kconfig           |   7 +
>   drivers/gpu/drm/stm/Makefile          |   2 +
>   drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 352 ++++++++++++++++++++++++++++++++++
>   3 files changed, 361 insertions(+)
>   create mode 100644 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> 
> diff --git a/drivers/gpu/drm/stm/Kconfig b/drivers/gpu/drm/stm/Kconfig
> index 4b88223..f9462bc 100644
> --- a/drivers/gpu/drm/stm/Kconfig
> +++ b/drivers/gpu/drm/stm/Kconfig
> @@ -14,3 +14,10 @@ config DRM_STM
>   	  STMicroelectronics STM32 MCUs.
>   	  To compile this driver as a module, choose M here: the module
>   	  will be called stm-drm.
> +
> +config DRM_STM_DSI
> +	tristate "STMicroelectronics specific extensions for Synopsys MIPI DSI"
> +	depends on DRM_STM
> +	select DRM_DW_MIPI_DSI
> +	help
> +	  Choose this option for MIPI DSI support on STMicroelectronics SoC.
> diff --git a/drivers/gpu/drm/stm/Makefile b/drivers/gpu/drm/stm/Makefile
> index a09ecf4..d883adc 100644
> --- a/drivers/gpu/drm/stm/Makefile
> +++ b/drivers/gpu/drm/stm/Makefile
> @@ -2,4 +2,6 @@ stm-drm-y := \
>   	drv.o \
>   	ltdc.o
>   
> +obj-$(CONFIG_DRM_STM_DSI) += dw_mipi_dsi-stm.o
> +
>   obj-$(CONFIG_DRM_STM) += stm-drm.o
> diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> new file mode 100644
> index 0000000..16ae00e
> --- /dev/null
> +++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> @@ -0,0 +1,352 @@
> +/*
> + * Copyright (C) STMicroelectronics SA 2017
> + *
> + * Authors: Philippe Cornu <philippe.cornu at st.com>
> + *          Yannick Fertre <yannick.fertre at st.com>
> + *
> + * License terms:  GNU General Public License (GPL), version 2
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/bridge/dw_mipi_dsi.h>
> +#include <video/mipi_display.h>
> +
> +/* DSI wrapper register & bit definitions */
> +/* Note: registers are named as in the Reference Manual */
> +#define DSI_WCFGR	0x0400		/* Wrapper ConFiGuration Reg */
> +#define WCFGR_DSIM	BIT(0)		/* DSI Mode */
> +#define WCFGR_COLMUX	GENMASK(3, 1)	/* COLor MUltipleXing */
> +
> +#define DSI_WCR		0x0404		/* Wrapper Control Reg */
> +#define WCR_DSIEN	BIT(3)		/* DSI ENable */
> +
> +#define DSI_WISR	0x040C		/* Wrapper Interrupt and Status Reg */
> +#define WISR_PLLLS	BIT(8)		/* PLL Lock Status */
> +#define WISR_RRS	BIT(12)		/* Regulator Ready Status */
> +
> +#define DSI_WPCR0	0x0418		/* Wrapper Phy Conf Reg 0 */
> +#define WPCR0_UIX4	GENMASK(5, 0)	/* Unit Interval X 4 */
> +#define WPCR0_TDDL	BIT(16)		/* Turn Disable Data Lanes */
> +
> +#define DSI_WRPCR	0x0430		/* Wrapper Regulator & Pll Ctrl Reg */
> +#define WRPCR_PLLEN	BIT(0)		/* PLL ENable */
> +#define WRPCR_NDIV	GENMASK(8, 2)	/* pll loop DIVision Factor */
> +#define WRPCR_IDF	GENMASK(14, 11)	/* pll Input Division Factor */
> +#define WRPCR_ODF	GENMASK(17, 16)	/* pll Output Division Factor */
> +#define WRPCR_REGEN	BIT(24)		/* REGulator ENable */
> +#define WRPCR_BGREN	BIT(28)		/* BandGap Reference ENable */
> +#define IDF_MIN		1
> +#define IDF_MAX		7
> +#define NDIV_MIN	10
> +#define NDIV_MAX	125
> +#define ODF_MIN		1
> +#define ODF_MAX		8
> +
> +/* dsi color format coding according to the datasheet */
> +enum dsi_color {
> +	DSI_RGB565_CONF1,
> +	DSI_RGB565_CONF2,
> +	DSI_RGB565_CONF3,
> +	DSI_RGB666_CONF1,
> +	DSI_RGB666_CONF2,
> +	DSI_RGB888,
> +};
> +
> +#define LANE_MIN_KBPS	31250
> +#define LANE_MAX_KBPS	500000
> +
> +/* Sleep & timeout for regulator on/off, pll lock/unlock & fifo empty */
> +#define SLEEP_US	1000
> +#define TIMEOUT_US	200000
> +
> +struct dw_mipi_dsi_stm {
> +	void __iomem *base;
> +	struct clk *pllref_clk;
> +};
> +
> +static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
> +{
> +	writel(val, dsi->base + reg);
> +}
> +
> +static inline u32 dsi_read(struct dw_mipi_dsi_stm *dsi, u32 reg)
> +{
> +	return readl(dsi->base + reg);
> +}
> +
> +static inline void dsi_set(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
> +{
> +	dsi_write(dsi, reg, dsi_read(dsi, reg) | mask);
> +}
> +
> +static inline void dsi_clear(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
> +{
> +	dsi_write(dsi, reg, dsi_read(dsi, reg) & ~mask);
> +}
> +
> +static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
> +				   u32 mask, u32 val)
> +{
> +	dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
> +}
> +
> +static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
> +{
> +	switch (fmt) {
> +	case MIPI_DSI_FMT_RGB888:
> +		return DSI_RGB888;
> +	case MIPI_DSI_FMT_RGB666:
> +		return DSI_RGB666_CONF2;
> +	case MIPI_DSI_FMT_RGB666_PACKED:
> +		return DSI_RGB666_CONF1;
> +	case MIPI_DSI_FMT_RGB565:
> +		return DSI_RGB565_CONF1;
> +	default:
> +		DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
> +	}
> +	return DSI_RGB888;
> +}
> +
> +static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
> +{
> +	/* prevent from division by 0 */
> +	if (idf * odf)
> +		return DIV_ROUND_CLOSEST(clkin_khz * ndiv, idf * odf);
> +
> +	return 0;
> +}
> +
> +static int dsi_pll_get_params(int clkin_khz, int clkout_khz,
> +			      int *idf, int *ndiv, int *odf)
> +{
> +	int i, o, n, n_min, n_max;
> +	int fvco_min, fvco_max, delta, best_delta; /* all in khz */
> +
> +	/* Early checks preventing division by 0 & odd results */
> +	if ((clkin_khz <= 0) || (clkout_khz <= 0))
> +		return -EINVAL;
> +
> +	fvco_min = LANE_MIN_KBPS * 2 * ODF_MAX;
> +	fvco_max = LANE_MAX_KBPS * 2 * ODF_MIN;
> +
> +	best_delta = 1000000; /* big started value (1000000khz) */
> +
> +	for (i = IDF_MIN; i <= IDF_MAX; i++) {
> +		/* Compute ndiv range according to Fvco */
> +		n_min = ((fvco_min * i) / (2 * clkin_khz)) + 1;
> +		n_max = (fvco_max * i) / (2 * clkin_khz);
> +
> +		/* No need to continue idf loop if we reach ndiv max */
> +		if (n_min >= NDIV_MAX)
> +			break;
> +
> +		/* Clamp ndiv to valid values */
> +		if (n_min < NDIV_MIN)
> +			n_min = NDIV_MIN;
> +		if (n_max > NDIV_MAX)
> +			n_max = NDIV_MAX;
> +
> +		for (o = ODF_MIN; o <= ODF_MAX; o *= 2) {
> +			n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz);
> +			/* Check ndiv according to vco range */
> +			if ((n < n_min) || (n > n_max))
> +				continue;
> +			/* Check if new delta is better & saves parameters */
> +			delta = dsi_pll_get_clkout_khz(clkin_khz, i, n, o) -
> +				clkout_khz;
> +			if (delta < 0)
> +				delta = -delta;
> +			if (delta < best_delta) {
> +				*idf = i;
> +				*ndiv = n;
> +				*odf = o;
> +				best_delta = delta;
> +			}
> +			/* fast return in case of "perfect result" */
> +			if (!delta)
> +				return 0;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int dw_mipi_dsi_phy_init(void *priv_data)
> +{
> +	struct dw_mipi_dsi_stm *dsi = priv_data;
> +	u32 val;
> +	int ret;
> +
> +	/* Enable the regulator */
> +	dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN);
> +	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
> +				 SLEEP_US, TIMEOUT_US);
> +	if (ret)
> +		DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
> +
> +	/* Enable the DSI PLL & wait for its lock */
> +	dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
> +	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
> +				 SLEEP_US, TIMEOUT_US);
> +	if (ret)
> +		DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
> +
> +	/* Enable the DSI wrapper */
> +	dsi_set(dsi, DSI_WCR, WCR_DSIEN);
> +
> +	return 0;
> +}
> +
> +static int
> +dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
> +			  unsigned long mode_flags, u32 lanes, u32 format,
> +			  unsigned int *lane_mbps)
> +{
> +	struct dw_mipi_dsi_stm *dsi = priv_data;
> +	unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
> +	int ret, bpp;
> +	u32 val;
> +
> +	pll_in_khz = (unsigned int)(clk_get_rate(dsi->pllref_clk) / 1000);
> +
> +	/* Compute requested pll out */
> +	bpp = mipi_dsi_pixel_format_to_bpp(format);
> +	pll_out_khz = mode->clock * bpp / lanes;
> +	/* Add 20% to pll out to be higher than pixel bw (burst mode only) */
> +	pll_out_khz = (pll_out_khz * 12) / 10;
> +	if (pll_out_khz > LANE_MAX_KBPS) {
> +		pll_out_khz = LANE_MAX_KBPS;
> +		DRM_WARN("Warning max phy mbps is used\n");
> +	}
> +	if (pll_out_khz < LANE_MIN_KBPS) {
> +		pll_out_khz = LANE_MIN_KBPS;
> +		DRM_WARN("Warning min phy mbps is used\n");
> +	}
> +
> +	/* Compute best pll parameters */
> +	idf = 0;
> +	ndiv = 0;
> +	odf = 0;
> +	ret = dsi_pll_get_params(pll_in_khz, pll_out_khz, &idf, &ndiv, &odf);
> +	if (ret)
> +		DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
> +
> +	/* Get the adjusted pll out value */
> +	pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
> +
> +	/* Set the PLL division factors */
> +	dsi_update_bits(dsi, DSI_WRPCR,	WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF,
> +			(ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16));
> +
> +	/* Compute uix4 & set the bit period in high-speed mode */
> +	val = 4000000 / pll_out_khz;
> +	dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val);
> +
> +	/* Select video mode by resetting DSIM bit */
> +	dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
> +
> +	/* Select the color coding */
> +	dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
> +			dsi_color_from_mipi(format) << 1);
> +
> +	*lane_mbps = pll_out_khz / 1000;
> +
> +	DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
> +			 pll_in_khz, pll_out_khz, *lane_mbps);
> +
> +	return 0;
> +}
> +
> +static struct dw_mipi_dsi_phy_ops dw_mipi_dsi_stm_phy_ops = {
> +	.init = dw_mipi_dsi_phy_init,
> +	.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
> +};
> +
> +static struct dw_mipi_dsi_plat_data dw_mipi_dsi_stm_plat_data = {
> +	.max_data_lanes = 2,
> +	.phy_ops = &dw_mipi_dsi_stm_phy_ops,
> +};
> +
> +static const struct of_device_id dw_mipi_dsi_stm_dt_ids[] = {
> +	{ .compatible = "st,stm32-dsi", .data = &dw_mipi_dsi_stm_plat_data, },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, dw_mipi_dsi_stm_dt_ids);
> +
> +static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct dw_mipi_dsi_stm *dsi;
> +	struct resource *res;
> +	int ret;
> +
> +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> +	if (!dsi)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		DRM_ERROR("Unable to get resource\n");
> +		return -ENODEV;
> +	}
> +
> +	dsi->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(dsi->base)) {
> +		DRM_ERROR("Unable to get dsi registers\n");
> +		return PTR_ERR(dsi->base);
> +	}
> +
> +	dsi->pllref_clk = devm_clk_get(dev, "ref");
> +	if (IS_ERR(dsi->pllref_clk)) {
> +		ret = PTR_ERR(dsi->pllref_clk);
> +		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(dsi->pllref_clk);
> +	if (ret) {
> +		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
> +		return ret;
> +	}
> +
> +	dw_mipi_dsi_stm_plat_data.base = dsi->base;
> +	dw_mipi_dsi_stm_plat_data.priv_data = dsi;
> +
> +	ret = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
> +	if (ret) {
> +		DRM_ERROR("Failed to initialize mipi dsi host\n");
> +		clk_disable_unprepare(dsi->pllref_clk);
> +	}
> +
> +	return ret;
> +}
> +
> +static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
> +{
> +	struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
> +
> +	clk_disable_unprepare(dsi->pllref_clk);
> +	dw_mipi_dsi_remove(pdev);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver dw_mipi_dsi_stm_driver = {
> +	.probe		= dw_mipi_dsi_stm_probe,
> +	.remove		= dw_mipi_dsi_stm_remove,
> +	.driver		= {
> +		.of_match_table = dw_mipi_dsi_stm_dt_ids,
> +		.name	= "dw_mipi_dsi-stm",
> +	},
> +};
> +
> +module_platform_driver(dw_mipi_dsi_stm_driver);
> +
> +MODULE_AUTHOR("Philippe Cornu <philippe.cornu at st.com>");
> +MODULE_AUTHOR("Yannick Fertre <yannick.fertre at st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics DW MIPI DSI host controller driver");
> +MODULE_LICENSE("GPL v2");
> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project


More information about the dri-devel mailing list