[PATCH] drm: arcpgu: Allow some clock deviation in crtc->mode_valid() callback

[Jose Abreu]

Currently we expect that clock driver produces the exact same value
as we are requiring. There can, and will, be some deviation however
so we need to take into account that instead of rejecting the mode.

According to HDMI spec we have a max of +-0.5% for the pixel clock
frequency variation. Lets take that into an advantage and use it
to calculate how much deviation we can support.

This patch was based on today's drm-misc-next.

Signed-off-by: Jose Abreu <joabreu at synopsys.com>
Cc: Carlos Palminha <palminha at synopsys.com>
Cc: Alexey Brodkin <abrodkin at synopsys.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Dave Airlie <airlied at linux.ie>
---
 drivers/gpu/drm/arc/arcpgu_crtc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/arc/arcpgu_crtc.c b/drivers/gpu/drm/arc/arcpgu_crtc.c
index 611af74..20528ba 100644
--- a/drivers/gpu/drm/arc/arcpgu_crtc.c
+++ b/drivers/gpu/drm/arc/arcpgu_crtc.c
@@ -69,12 +69,13 @@ static enum drm_mode_status arc_pgu_crtc_mode_valid(struct drm_crtc *crtc,
 {
 	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
 	long rate, clk_rate = mode->clock * 1000;
+	long diff = clk_rate / 200; /* +-0.5% allowed by HDMI spec*/
 
 	rate = clk_round_rate(arcpgu->clk, clk_rate);
-	if (rate != clk_rate)
-		return MODE_NOCLOCK;
+	if ((max(rate, clk_rate) - min(rate, clk_rate)) < diff)
+		return MODE_OK;
 
-	return MODE_OK;
+	return MODE_NOCLOCK;
 }
 
 static void arc_pgu_crtc_mode_set_nofb(struct drm_crtc *crtc)
-- 
1.9.1