[PATCH v2 9/9] drm/i915: Add render decompression support
Ben Widawsky
ben at bwidawsk.net
Wed Mar 1 17:50:56 UTC 2017
On 17-03-01 12:51:17, Ville Syrjälä wrote:
>On Tue, Feb 28, 2017 at 03:20:38PM -0800, Ben Widawsky wrote:
>> On 17-02-28 12:18:39, Jason Ekstrand wrote:
><snip>
>> >I've said it before but reading through Ben's patches again make me want to
>> >be peskier about it. I would really like the UABI to treat the CCS as if
>> >it's Y-tiled with a tile size of 128B x 32 rows. Why? Because this is
>> >what all the docs say it is. From the display docs for "Color Control
>> >Surface":
>> >
>> >"The Color Control Surface (CCS) contains the compression status of the
>> >cache-line pairs. The
>> >compression state of the cache-line pair is specified by 2 bits in the CCS.
>> >Each CCS cache-line represents
>> >an area on the main surface of 16 x16 sets of 128 byte Y-tiled
>> >cache-line-pairs. CCS is always Y tiled."
>> >
>> >This contains 95% of the information needed to know the relation between
>> >the CCS and the main surface. The other 5% (which is badly documented) is
>> >that cache line pairs are horizontally adjacent. This gives a relationship
>> >of one cache line in the CCS maps to 32x64 cache lines in the main surface.
>> >
>> >But it's not actually Y-tiled? Of course not. I've worked out the exact
>> >tiling and it looks something like Y but isn't quite the same. However,
>> >this isn't unique to CCS. Stencil (W-tiled), HiZ, and gen7-8
>> >single-sampled MCS also each have their own tiling (Haswell MCS is
>> >especially exotic) but the docs call all of them Y-tiled and I think the
>> >hardware internally treats them as Y-tiled with the cache lines shuffled
>> >around a bit.
>> >
>> >Given the fact that they seem to like to change the MCS/CCS tiling around
>> >on every hardware generation, I'm reluctant to base UABI on the fact that
>> >the CCS appears to have 64x64 "pixels" per tile with each "pixel"
>> >corresponding to 16x8 pixels in the color surface. That's not what we had
>> >on any previous gen and may change on gen10 for no aparent reason. I'd
>> >much rather base it on Y-tiling and a relationship between cache lines
>> >which, even if they change the exact swizzle on gen10, will probably remain
>> >the same. (For the gen7-8 analogue of CCS, they changed the tiling every
>> >generation but the relationship of one MCS cache line maps to 32x128 color
>> >cache lines remained the same).
>> >
>> >Ok, I've said my peice. If we have to divide by 2 in userspace, we won't
>> >die, but I'd like to get the UABI right before we chissel it in stone.
>> >
>> >--Jason
>> >
>> >
>>
>> I vote we make the stride in units of tiles when we have the CCS modifier.
>
>That won't fly with the KMS API. I suppose I could make the tile 128 bytes
>wide by swapping the "1 byte == 16x8 pixels" notion with a
>"1 byte == 8x16 pixels" notion. Doesn't match the actual truth anymore,
>but I guess no one really cares.
>
KMS API goes right out the window with modifiers. Isn't that really the whole
point of modifiers?
>>
>> >> + /* fall through */
>> >> case I915_FORMAT_MOD_Yf_TILED:
>> >> /*
>> >> * Bspec seems to suggest that the Yf tile width would
>> >> @@ -2156,7 +2164,7 @@ static unsigned int intel_surf_alignment(const
>> >> struct drm_framebuffer *fb,
>> >> struct drm_i915_private *dev_priv = to_i915(fb->dev);
>> >>
>> >> /* AUX_DIST needs only 4K alignment */
>> >> - if (fb->format->format == DRM_FORMAT_NV12 && plane == 1)
>> >> + if (plane == 1)
>> >> return 4096;
>> >>
>> >> switch (fb->modifier) {
>> >> @@ -2166,6 +2174,8 @@ static unsigned int intel_surf_alignment(const
>> >> struct drm_framebuffer *fb,
>> >> if (INTEL_GEN(dev_priv) >= 9)
>> >> return 256 * 1024;
>> >> return 0;
>> >> + case I915_FORMAT_MOD_Y_TILED_CCS:
>> >> + case I915_FORMAT_MOD_Yf_TILED_CCS:
>> >> case I915_FORMAT_MOD_Y_TILED:
>> >> case I915_FORMAT_MOD_Yf_TILED:
>> >> return 1 * 1024 * 1024;
>> >> @@ -2472,6 +2482,7 @@ static unsigned int intel_fb_modifier_to_tiling(uint64_t
>> >> fb_modifier)
>> >> case I915_FORMAT_MOD_X_TILED:
>> >> return I915_TILING_X;
>> >> case I915_FORMAT_MOD_Y_TILED:
>> >> + case I915_FORMAT_MOD_Y_TILED_CCS:
>> >> return I915_TILING_Y;
>> >> default:
>> >> return I915_TILING_NONE;
>> >> @@ -2536,6 +2547,35 @@ intel_fill_fb_info(struct drm_i915_private
>> >> *dev_priv,
>> >>
>> >> intel_fb_offset_to_xy(&x, &y, fb, i);
>> >>
>> >> + if ((fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
>> >> + fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS) && i ==
>> >> 1) {
>> >> + int main_x, main_y;
>> >> + int ccs_x, ccs_y;
>> >> +
>> >> + /*
>> >> + * Each byte of CCS corresponds to a 16x8 area of
>> >> the main surface, and
>> >> + * each CCS tile is 64x64 bytes.
>> >> + */
>> >> + ccs_x = (x * 16) % (64 * 16);
>> >> + ccs_y = (y * 8) % (64 * 8);
>> >> + main_x = intel_fb->normal[0].x % (64 * 16);
>> >> + main_y = intel_fb->normal[0].y % (64 * 8);
>> >> +
>> >> + /*
>> >> + * CCS doesn't have its own x/y offset register,
>> >> so the intra CCS tile
>> >> + * x/y offsets must match between CCS and the main
>> >> surface.
>> >> + */
>> >> + if (main_x != ccs_x || main_y != ccs_y) {
>> >> + DRM_DEBUG_KMS("Bad CCS x/y (main %d,%d ccs
>> >> %d,%d) full (main %d,%d ccs %d,%d)\n",
>> >> + main_x, main_y,
>> >> + ccs_x, ccs_y,
>> >> + intel_fb->normal[0].x,
>> >> + intel_fb->normal[0].y,
>> >> + x, y);
>> >> + return -EINVAL;
>> >> + }
>> >> + }
>> >> +
>> >> /*
>> >> * The fence (if used) is aligned to the start of the
>> >> object
>> >> * so having the framebuffer wrap around across the edge
>> >> of the
>> >> @@ -2873,6 +2913,9 @@ static int skl_max_plane_width(const struct
>> >> drm_framebuffer *fb, int plane,
>> >> break;
>> >> }
>> >> break;
>> >> + case I915_FORMAT_MOD_Y_TILED_CCS:
>> >> + case I915_FORMAT_MOD_Yf_TILED_CCS:
>> >> + /* FIXME AUX plane? */
>> >> case I915_FORMAT_MOD_Y_TILED:
>> >> case I915_FORMAT_MOD_Yf_TILED:
>> >> switch (cpp) {
>> >> @@ -2895,6 +2938,42 @@ static int skl_max_plane_width(const struct
>> >> drm_framebuffer *fb, int plane,
>> >> return 2048;
>> >> }
>> >>
>> >> +static bool skl_check_main_ccs_coordinates(struct intel_plane_state
>> >> *plane_state,
>> >> + int main_x, int main_y, u32
>> >> main_offset)
>> >> +{
>> >> + const struct drm_framebuffer *fb = plane_state->base.fb;
>> >> + int aux_x = plane_state->aux.x;
>> >> + int aux_y = plane_state->aux.y;
>> >> + u32 aux_offset = plane_state->aux.offset;
>> >> + u32 alignment = intel_surf_alignment(fb, 1);
>> >> +
>> >> + while (aux_offset >= main_offset && aux_y <= main_y) {
>> >> + int x, y;
>> >> +
>> >> + if (aux_x == main_x && aux_y == main_y)
>> >> + break;
>> >> +
>> >> + if (aux_offset == 0)
>> >> + break;
>> >> +
>> >> + x = aux_x / 16;
>> >> + y = aux_y / 8;
>> >> + aux_offset = intel_adjust_tile_offset(&x, &y, plane_state,
>> >> 1,
>> >> + aux_offset,
>> >> aux_offset - alignment);
>> >> + aux_x = x * 16 + aux_x % 16;
>> >> + aux_y = y * 8 + aux_y % 8;
>> >> + }
>> >> +
>> >> + if (aux_x != main_x || aux_y != main_y)
>> >> + return false;
>> >> +
>> >> + plane_state->aux.offset = aux_offset;
>> >> + plane_state->aux.x = aux_x;
>> >> + plane_state->aux.y = aux_y;
>> >> +
>> >> + return true;
>> >> +}
>> >> +
>> >> static int skl_check_main_surface(struct intel_plane_state *plane_state)
>> >> {
>> >> const struct drm_framebuffer *fb = plane_state->base.fb;
>> >> @@ -2937,7 +3016,7 @@ static int skl_check_main_surface(struct
>> >> intel_plane_state *plane_state)
>> >>
>> >> while ((x + w) * cpp > fb->pitches[0]) {
>> >> if (offset == 0) {
>> >> - DRM_DEBUG_KMS("Unable to find suitable
>> >> display surface offset\n");
>> >> + DRM_DEBUG_KMS("Unable to find suitable
>> >> display surface offset due to X-tiling\n");
>> >> return -EINVAL;
>> >> }
>> >>
>> >> @@ -2946,6 +3025,26 @@ static int skl_check_main_surface(struct
>> >> intel_plane_state *plane_state)
>> >> }
>> >> }
>> >>
>> >> + /*
>> >> + * CCS AUX surface doesn't have its own x/y offsets, we must make
>> >> sure
>> >> + * they match with the main surface x/y offsets.
>> >> + */
>> >> + if (fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
>> >> + fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS) {
>> >> + while (!skl_check_main_ccs_coordinates(plane_state, x, y,
>> >> offset)) {
>> >> + if (offset == 0)
>> >> + break;
>> >> +
>> >> + offset = intel_adjust_tile_offset(&x, &y,
>> >> plane_state, 0,
>> >> + offset, offset -
>> >> alignment);
>> >> + }
>> >> +
>> >> + if (x != plane_state->aux.x || y != plane_state->aux.y) {
>> >> + DRM_DEBUG_KMS("Unable to find suitable display
>> >> surface offset due to CCS\n");
>> >> + return -EINVAL;
>> >> + }
>> >> + }
>> >> +
>> >> plane_state->main.offset = offset;
>> >> plane_state->main.x = x;
>> >> plane_state->main.y = y;
>> >> @@ -2982,6 +3081,47 @@ static int skl_check_nv12_aux_surface(struct
>> >> intel_plane_state *plane_state)
>> >> return 0;
>> >> }
>> >>
>> >> +static int skl_check_ccs_aux_surface(struct intel_plane_state
>> >> *plane_state)
>> >> +{
>> >> + struct intel_plane *plane = to_intel_plane(plane_state->
>> >> base.plane);
>> >> + struct intel_crtc *crtc = to_intel_crtc(plane_state->base.crtc);
>> >> + int src_x = plane_state->base.src.x1 >> 16;
>> >> + int src_y = plane_state->base.src.y1 >> 16;
>> >> + int x = src_x / 16;
>> >> + int y = src_y / 8;
>> >> + u32 offset;
>> >> +
>> >> + switch (plane->id) {
>> >> + case PLANE_PRIMARY:
>> >> + case PLANE_SPRITE0:
>> >> + break;
>> >> + default:
>> >> + DRM_DEBUG_KMS("RC support only on plane 1 and 2\n");
>> >> + return -EINVAL;
>> >> + }
>> >> +
>> >> + if (crtc->pipe == PIPE_C) {
>> >> + DRM_DEBUG_KMS("No RC support on pipe C\n");
>> >> + return -EINVAL;
>> >> + }
>> >> +
>> >> + if (plane_state->base.rotation &&
>> >> + plane_state->base.rotation & ~(DRM_ROTATE_0 | DRM_ROTATE_180))
>> >> {
>> >> + DRM_DEBUG_KMS("RC support only with 0/180 degree rotation
>> >> %x\n",
>> >> + plane_state->base.rotation);
>> >> + return -EINVAL;
>> >> + }
>> >> +
>> >> + intel_add_fb_offsets(&x, &y, plane_state, 1);
>> >> + offset = intel_compute_tile_offset(&x, &y, plane_state, 1);
>> >> +
>> >> + plane_state->aux.offset = offset;
>> >> + plane_state->aux.x = x * 16 + src_x % 16;
>> >> + plane_state->aux.y = y * 8 + src_y % 8;
>> >> +
>> >> + return 0;
>> >> +}
>> >> +
>> >> int skl_check_plane_surface(struct intel_plane_state *plane_state)
>> >> {
>> >> const struct drm_framebuffer *fb = plane_state->base.fb;
>> >> @@ -3002,6 +3142,11 @@ int skl_check_plane_surface(struct
>> >> intel_plane_state *plane_state)
>> >> ret = skl_check_nv12_aux_surface(plane_state);
>> >> if (ret)
>> >> return ret;
>> >> + } else if (fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
>> >> + fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS) {
>> >> + ret = skl_check_ccs_aux_surface(plane_state);
>> >> + if (ret)
>> >> + return ret;
>> >> } else {
>> >> plane_state->aux.offset = ~0xfff;
>> >> plane_state->aux.x = 0;
>> >> @@ -3357,8 +3502,12 @@ u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
>> >> return PLANE_CTL_TILED_X;
>> >> case I915_FORMAT_MOD_Y_TILED:
>> >> return PLANE_CTL_TILED_Y;
>> >> + case I915_FORMAT_MOD_Y_TILED_CCS:
>> >> + return PLANE_CTL_TILED_Y | PLANE_CTL_DECOMPRESSION_ENABLE;
>> >> case I915_FORMAT_MOD_Yf_TILED:
>> >> return PLANE_CTL_TILED_YF;
>> >> + case I915_FORMAT_MOD_Yf_TILED_CCS:
>> >> + return PLANE_CTL_TILED_YF | PLANE_CTL_DECOMPRESSION_
>> >> ENABLE;
>> >> default:
>> >> MISSING_CASE(fb_modifier);
>> >> }
>> >> @@ -3401,6 +3550,7 @@ static void skylake_update_primary_plane(struct
>> >> drm_plane *plane,
>> >> u32 plane_ctl;
>> >> unsigned int rotation = plane_state->base.rotation;
>> >> u32 stride = skl_plane_stride(fb, 0, rotation);
>> >> + u32 aux_stride = skl_plane_stride(fb, 1, rotation);
>> >> u32 surf_addr = plane_state->main.offset;
>> >> int scaler_id = plane_state->scaler_id;
>> >> int src_x = plane_state->main.x;
>> >> @@ -3436,6 +3586,10 @@ static void skylake_update_primary_plane(struct
>> >> drm_plane *plane,
>> >> I915_WRITE(PLANE_OFFSET(pipe, plane_id), (src_y << 16) | src_x);
>> >> I915_WRITE(PLANE_STRIDE(pipe, plane_id), stride);
>> >> I915_WRITE(PLANE_SIZE(pipe, plane_id), (src_h << 16) | src_w);
>> >> + I915_WRITE(PLANE_AUX_DIST(pipe, plane_id),
>> >> + (plane_state->aux.offset - surf_addr) | aux_stride);
>> >> + I915_WRITE(PLANE_AUX_OFFSET(pipe, plane_id),
>> >> + (plane_state->aux.y << 16) | plane_state->aux.x);
>> >>
>> >> if (scaler_id >= 0) {
>> >> uint32_t ps_ctrl = 0;
>> >> @@ -9807,10 +9961,16 @@ skylake_get_initial_plane_config(struct
>> >> intel_crtc *crtc,
>> >> fb->modifier = I915_FORMAT_MOD_X_TILED;
>> >> break;
>> >> case PLANE_CTL_TILED_Y:
>> >> - fb->modifier = I915_FORMAT_MOD_Y_TILED;
>> >> + if (val & PLANE_CTL_DECOMPRESSION_ENABLE)
>> >> + fb->modifier = I915_FORMAT_MOD_Y_TILED_CCS;
>> >> + else
>> >> + fb->modifier = I915_FORMAT_MOD_Y_TILED;
>> >> break;
>> >> case PLANE_CTL_TILED_YF:
>> >> - fb->modifier = I915_FORMAT_MOD_Yf_TILED;
>> >> + if (val & PLANE_CTL_DECOMPRESSION_ENABLE)
>> >> + fb->modifier = I915_FORMAT_MOD_Yf_TILED_CCS;
>> >> + else
>> >> + fb->modifier = I915_FORMAT_MOD_Yf_TILED;
>> >> break;
>> >> default:
>> >> MISSING_CASE(tiling);
>> >> @@ -12014,7 +12174,7 @@ static void skl_do_mmio_flip(struct intel_crtc
>> >> *intel_crtc,
>> >> u32 ctl, stride = skl_plane_stride(fb, 0, rotation);
>> >>
>> >> ctl = I915_READ(PLANE_CTL(pipe, 0));
>> >> - ctl &= ~PLANE_CTL_TILED_MASK;
>> >> + ctl &= ~(PLANE_CTL_TILED_MASK | PLANE_CTL_DECOMPRESSION_ENABLE);
>> >> switch (fb->modifier) {
>> >> case DRM_FORMAT_MOD_NONE:
>> >> break;
>> >> @@ -12024,9 +12184,15 @@ static void skl_do_mmio_flip(struct intel_crtc
>> >> *intel_crtc,
>> >> case I915_FORMAT_MOD_Y_TILED:
>> >> ctl |= PLANE_CTL_TILED_Y;
>> >> break;
>> >> + case I915_FORMAT_MOD_Y_TILED_CCS:
>> >> + ctl |= PLANE_CTL_TILED_Y | PLANE_CTL_DECOMPRESSION_ENABLE;
>> >> + break;
>> >> case I915_FORMAT_MOD_Yf_TILED:
>> >> ctl |= PLANE_CTL_TILED_YF;
>> >> break;
>> >> + case I915_FORMAT_MOD_Yf_TILED_CCS:
>> >> + ctl |= PLANE_CTL_TILED_YF | PLANE_CTL_DECOMPRESSION_
>> >> ENABLE;
>> >> + break;
>> >> default:
>> >> MISSING_CASE(fb->modifier);
>> >> }
>> >> @@ -15925,9 +16091,10 @@ static int intel_framebuffer_init(struct
>> >> drm_device *dev,
>> >> struct drm_i915_gem_object *obj)
>> >> {
>> >> struct drm_i915_private *dev_priv = to_i915(dev);
>> >> + struct drm_framebuffer *fb = &intel_fb->base;
>> >> unsigned int tiling = i915_gem_object_get_tiling(obj);
>> >> - int ret;
>> >> - u32 pitch_limit, stride_alignment;
>> >> + int ret, i;
>> >> + u32 pitch_limit;
>> >> struct drm_format_name_buf format_name;
>> >>
>> >> WARN_ON(!mutex_is_locked(&dev->struct_mutex));
>> >> @@ -15953,6 +16120,19 @@ static int intel_framebuffer_init(struct
>> >> drm_device *dev,
>> >>
>> >> /* Passed in modifier sanity checking. */
>> >> switch (mode_cmd->modifier[0]) {
>> >> + case I915_FORMAT_MOD_Y_TILED_CCS:
>> >> + case I915_FORMAT_MOD_Yf_TILED_CCS:
>> >> + switch (mode_cmd->pixel_format) {
>> >> + case DRM_FORMAT_XBGR8888:
>> >> + case DRM_FORMAT_ABGR8888:
>> >> + case DRM_FORMAT_XRGB8888:
>> >> + case DRM_FORMAT_ARGB8888:
>> >> + break;
>> >> + default:
>> >> + DRM_DEBUG_KMS("RC supported only with RGB8888
>> >> formats\n");
>> >> + return -EINVAL;
>> >> + }
>> >> + /* fall through */
>> >> case I915_FORMAT_MOD_Y_TILED:
>> >> case I915_FORMAT_MOD_Yf_TILED:
>> >> if (INTEL_GEN(dev_priv) < 9) {
>> >> @@ -16059,22 +16239,46 @@ static int intel_framebuffer_init(struct
>> >> drm_device *dev,
>> >> if (mode_cmd->offsets[0] != 0)
>> >> return -EINVAL;
>> >>
>> >> - drm_helper_mode_fill_fb_struct(dev, &intel_fb->base, mode_cmd);
>> >> + drm_helper_mode_fill_fb_struct(dev, fb, mode_cmd);
>> >>
>> >> - stride_alignment = intel_fb_stride_alignment(&intel_fb->base, 0);
>> >> - if (mode_cmd->pitches[0] & (stride_alignment - 1)) {
>> >> - DRM_DEBUG_KMS("pitch (%d) must be at least %u byte
>> >> aligned\n",
>> >> - mode_cmd->pitches[0], stride_alignment);
>> >> - return -EINVAL;
>> >> + for (i = 0; i < fb->format->num_planes; i++) {
>> >> + u32 stride_alignment;
>> >> +
>> >> + if (mode_cmd->handles[i] != mode_cmd->handles[0]) {
>> >> + DRM_DEBUG_KMS("bad plane %d handle\n", i);
>> >> + return -EINVAL;
>> >> + }
>> >> +
>> >> + stride_alignment = intel_fb_stride_alignment(fb, i);
>> >> +
>> >> + /*
>> >> + * Display WA #0531: skl,bxt,kbl,glk
>> >> + *
>> >> + * Render decompression and plane width > 3840
>> >> + * combined with horizontal panning requires the
>> >> + * plane stride to be a multiple of 4. We'll just
>> >> + * require the entire fb to accommodate that to avoid
>> >> + * potential runtime errors at plane configuration time.
>> >>
>> >
>> >Note to Ben: Userspace needs to know about this too. In this case, I
>> >believe "multiple of 4" means "multiple of 4 tiles". You've never hit this
>> >because the standard 1920x1080 is 60 tiles wide which is a multiple of 4.
>> >
>> >
>> >> + */
>> >> + if (IS_GEN9(dev_priv) && i == 0 && fb->width > 3840 &&
>> >> + (fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
>> >> + fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS))
>> >> + stride_alignment *= 4;
>> >> +
>> >> + if (fb->pitches[i] & (stride_alignment - 1)) {
>> >> + DRM_DEBUG_KMS("plane %d pitch (%d) must be at
>> >> least %u byte aligned\n",
>> >> + i, fb->pitches[i], stride_alignment);
>> >> + return -EINVAL;
>> >> + }
>> >> }
>> >>
>> >> intel_fb->obj = obj;
>> >>
>> >> - ret = intel_fill_fb_info(dev_priv, &intel_fb->base);
>> >> + ret = intel_fill_fb_info(dev_priv, fb);
>> >> if (ret)
>> >> return ret;
>> >>
>> >> - ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
>> >> + ret = drm_framebuffer_init(dev, fb, &intel_fb_funcs);
>> >> if (ret) {
>> >> DRM_ERROR("framebuffer init failed %d\n", ret);
>> >> return ret;
>> >> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_
>> >> pm.c
>> >> index 249623d45be0..25782cd174c0 100644
>> >> --- a/drivers/gpu/drm/i915/intel_pm.c
>> >> +++ b/drivers/gpu/drm/i915/intel_pm.c
>> >> @@ -62,6 +62,20 @@ static void gen9_init_clock_gating(struct
>> >> drm_i915_private *dev_priv)
>> >> I915_WRITE(CHICKEN_PAR1_1,
>> >> I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP);
>> >>
>> >> + /*
>> >> + * Display WA#0390: skl,bxt,kbl,glk
>> >> + *
>> >> + * Must match Sampler, Pixel Back End, and Media
>> >> + * (0xE194 bit 8, 0x7014 bit 13, 0x4DDC bits 27 and 31).
>> >> + *
>> >> + * Including bits outside the page in the hash would
>> >> + * require 2 (or 4?) MiB alignment of resources. Just
>> >> + * assume the defaul hashing mode which only uses bits
>> >> + * within the page.
>> >> + */
>> >> + I915_WRITE(CHICKEN_PAR1_1,
>> >> + I915_READ(CHICKEN_PAR1_1) & ~SKL_RC_HASH_OUTSIDE);
>> >> +
>> >> I915_WRITE(GEN8_CONFIG0,
>> >> I915_READ(GEN8_CONFIG0) | GEN9_DEFAULT_FIXES);
>> >>
>> >> @@ -3314,7 +3328,9 @@ skl_ddb_min_alloc(const struct drm_plane_state
>> >> *pstate,
>> >>
>> >> /* For Non Y-tile return 8-blocks */
>> >> if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
>> >> - fb->modifier != I915_FORMAT_MOD_Yf_TILED)
>> >> + fb->modifier != I915_FORMAT_MOD_Yf_TILED &&
>> >> + fb->modifier != I915_FORMAT_MOD_Y_TILED_CCS &&
>> >> + fb->modifier != I915_FORMAT_MOD_Yf_TILED_CCS)
>> >> return 8;
>> >>
>> >> src_w = drm_rect_width(&intel_pstate->base.src) >> 16;
>> >> @@ -3590,7 +3606,9 @@ static int skl_compute_plane_wm(const struct
>> >> drm_i915_private *dev_priv,
>> >> }
>> >>
>> >> y_tiled = fb->modifier == I915_FORMAT_MOD_Y_TILED ||
>> >> - fb->modifier == I915_FORMAT_MOD_Yf_TILED;
>> >> + fb->modifier == I915_FORMAT_MOD_Yf_TILED ||
>> >> + fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
>> >> + fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
>> >> x_tiled = fb->modifier == I915_FORMAT_MOD_X_TILED;
>> >>
>> >> /* Display WA #1141: kbl. */
>> >> @@ -3675,6 +3693,13 @@ static int skl_compute_plane_wm(const struct
>> >> drm_i915_private *dev_priv,
>> >> res_lines = DIV_ROUND_UP(selected_result.val,
>> >> plane_blocks_per_line.val);
>> >>
>> >> + /* Display WA #1125: skl,bxt,kbl,glk */
>> >> + if (level == 0 &&
>> >> + (fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
>> >> + fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS))
>> >> + res_blocks += fixed_16_16_to_u32_round_up(y_tile_minimum);
>> >> +
>> >> + /* Display WA #1126: skl,bxt,kbl,glk */
>> >> if (level >= 1 && level <= 7) {
>> >> if (y_tiled) {
>> >> res_blocks += fixed_16_16_to_u32_round_up(y_
>> >> tile_minimum);
>> >> diff --git a/drivers/gpu/drm/i915/intel_sprite.c
>> >> b/drivers/gpu/drm/i915/intel_sprite.c
>> >> index 7031bc733d97..063a994815d0 100644
>> >> --- a/drivers/gpu/drm/i915/intel_sprite.c
>> >> +++ b/drivers/gpu/drm/i915/intel_sprite.c
>> >> @@ -210,6 +210,7 @@ skl_update_plane(struct drm_plane *drm_plane,
>> >> u32 surf_addr = plane_state->main.offset;
>> >> unsigned int rotation = plane_state->base.rotation;
>> >> u32 stride = skl_plane_stride(fb, 0, rotation);
>> >> + u32 aux_stride = skl_plane_stride(fb, 1, rotation);
>> >> int crtc_x = plane_state->base.dst.x1;
>> >> int crtc_y = plane_state->base.dst.y1;
>> >> uint32_t crtc_w = drm_rect_width(&plane_state->base.dst);
>> >> @@ -248,6 +249,10 @@ skl_update_plane(struct drm_plane *drm_plane,
>> >> I915_WRITE(PLANE_OFFSET(pipe, plane_id), (y << 16) | x);
>> >> I915_WRITE(PLANE_STRIDE(pipe, plane_id), stride);
>> >> I915_WRITE(PLANE_SIZE(pipe, plane_id), (src_h << 16) | src_w);
>> >> + I915_WRITE(PLANE_AUX_DIST(pipe, plane_id),
>> >> + (plane_state->aux.offset - surf_addr) | aux_stride);
>> >> + I915_WRITE(PLANE_AUX_OFFSET(pipe, plane_id),
>> >> + (plane_state->aux.y << 16) | plane_state->aux.x);
>> >>
>> >> /* program plane scaler */
>> >> if (plane_state->scaler_id >= 0) {
>> >> --
>> >> 2.10.2
>> >>
>> >>
>
>--
>Ville Syrjälä
>Intel OTC
More information about the dri-devel
mailing list