[PATCH v4 7/9] drm: bridge: dw-hdmi: Add support for custom PHY configuration
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Mar 2 13:41:03 UTC 2017
Hi Jose,
On Thursday 02 Mar 2017 12:50:13 Jose Abreu wrote:
> On 01-03-2017 22:39, Laurent Pinchart wrote:
> > From: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
> >
> > The DWC HDMI TX controller interfaces with a companion PHY. While
> > Synopsys provides multiple standard PHYs, SoC vendors can also integrate
> > a custom PHY.
> >
> > Modularize PHY configuration to support vendor PHYs through platform
> > data. The existing PHY configuration code was originally written to
> > support the DWC HDMI 3D TX PHY, and seems to be compatible with the DWC
> > MLP PHY. The HDMI 2.0 PHY will require a separate configuration
> > function.
> >
> > Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas at ideasonboard.com>
> > ---
> > Changes since v1:
> >
> > - Check pdata->phy_configure in hdmi_phy_configure() to avoid
> > dereferencing NULL pointer.
> >
> > ---
> >
> > drivers/gpu/drm/bridge/dw-hdmi.c | 109 ++++++++++++++++++++++------------
> > include/drm/bridge/dw_hdmi.h | 7 +++
> > 2 files changed, 81 insertions(+), 35 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c
> > b/drivers/gpu/drm/bridge/dw-hdmi.c index cb2703862be2..b835d81bb471
> > 100644
> > --- a/drivers/gpu/drm/bridge/dw-hdmi.c
> > +++ b/drivers/gpu/drm/bridge/dw-hdmi.c
> > @@ -118,6 +118,9 @@ struct dw_hdmi_phy_data {
> > const char *name;
> > unsigned int gen;
> > bool has_svsret;
> > + int (*configure)(struct dw_hdmi *hdmi,
> > + const struct dw_hdmi_plat_data *pdata,
> > + unsigned long mpixelclock);
> > };
> >
> > struct dw_hdmi {
> > @@ -860,8 +863,8 @@ static bool hdmi_phy_wait_i2c_done(struct dw_hdmi
> > *hdmi, int msec)
> > return true;
> > }
> >
> > -static void hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
> > - unsigned char addr)
> > +void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
> > + unsigned char addr)
> > {
> > hdmi_writeb(hdmi, 0xFF, HDMI_IH_I2CMPHY_STAT0);
> > hdmi_writeb(hdmi, addr, HDMI_PHY_I2CM_ADDRESS_ADDR);
> > @@ -873,6 +876,7 @@ static void hdmi_phy_i2c_write(struct dw_hdmi *hdmi,
> > unsigned short data,
> > HDMI_PHY_I2CM_OPERATION_ADDR);
> > hdmi_phy_wait_i2c_done(hdmi, 1000);
> > }
> > +EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write);
> >
> > static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool
> > enable)
> > {
> > @@ -993,37 +997,67 @@ static int dw_hdmi_phy_power_on(struct dw_hdmi
> > *hdmi)
> > return 0;
> > }
> >
> > -static int hdmi_phy_configure(struct dw_hdmi *hdmi)
> > +/*
> > + * PHY configuration function for the DWC HDMI 3D TX PHY. Based on the
> > available
> > + * information the DWC MHL PHY has the same register layout and is thus
> > also
> > + * supported by this function.
> > + */
> > +static int hdmi_phy_configure_dwc_hdmi_3d_tx(struct dw_hdmi *hdmi,
> > + const struct dw_hdmi_plat_data *pdata,
> > + unsigned long mpixelclock)
> > {
> > - const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
> > - const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
> > const struct dw_hdmi_mpll_config *mpll_config = pdata->mpll_cfg;
> > const struct dw_hdmi_curr_ctrl *curr_ctrl = pdata->cur_ctr;
> > const struct dw_hdmi_phy_config *phy_config = pdata->phy_config;
> >
> > /* PLL/MPLL Cfg - always match on final entry */
> > for (; mpll_config->mpixelclock != ~0UL; mpll_config++)
> > - if (hdmi->hdmi_data.video_mode.mpixelclock <=
> > - mpll_config->mpixelclock)
> > + if (mpixelclock <= mpll_config->mpixelclock)
> > break;
> >
> > for (; curr_ctrl->mpixelclock != ~0UL; curr_ctrl++)
> > - if (hdmi->hdmi_data.video_mode.mpixelclock <=
> > - curr_ctrl->mpixelclock)
> > + if (mpixelclock <= curr_ctrl->mpixelclock)
> > break;
> >
> > for (; phy_config->mpixelclock != ~0UL; phy_config++)
> > - if (hdmi->hdmi_data.video_mode.mpixelclock <=
> > - phy_config->mpixelclock)
> > + if (mpixelclock <= phy_config->mpixelclock)
> > break;
> >
> > if (mpll_config->mpixelclock == ~0UL ||
> > curr_ctrl->mpixelclock == ~0UL ||
> > - phy_config->mpixelclock == ~0UL) {
> > - dev_err(hdmi->dev, "Pixel clock %d - unsupported by HDMI\n",
> > - hdmi->hdmi_data.video_mode.mpixelclock);
> > + phy_config->mpixelclock == ~0UL)
> > return -EINVAL;
> > - }
> > +
> > + dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].cpce,
> > + HDMI_3D_TX_PHY_CPCE_CTRL);
> > + dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].gmp,
> > + HDMI_3D_TX_PHY_GMPCTRL);
> > + dw_hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[0],
> > + HDMI_3D_TX_PHY_CURRCTRL);
> > +
> > + dw_hdmi_phy_i2c_write(hdmi, 0, HDMI_3D_TX_PHY_PLLPHBYCTRL);
> > + dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK,
> > + HDMI_3D_TX_PHY_MSM_CTRL);
> > +
> > + dw_hdmi_phy_i2c_write(hdmi, phy_config->term, HDMI_3D_TX_PHY_TXTERM);
> > + dw_hdmi_phy_i2c_write(hdmi, phy_config->sym_ctr,
> > + HDMI_3D_TX_PHY_CKSYMTXCTRL);
> > + dw_hdmi_phy_i2c_write(hdmi, phy_config->vlev_ctr,
> > + HDMI_3D_TX_PHY_VLEVCTRL);
> > +
> > + /* Override and disable clock termination. */
> > + dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE,
> > + HDMI_3D_TX_PHY_CKCALCTRL);
> > +
> > + return 0;
> > +}
> > +
> > +static int hdmi_phy_configure(struct dw_hdmi *hdmi)
> > +{
> > + const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
> > + const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
> > + unsigned long mpixelclock = hdmi->hdmi_data.video_mode.mpixelclock;
> > + int ret;
> >
> > dw_hdmi_phy_power_off(hdmi);
> >
> > @@ -1042,26 +1076,16 @@ static int hdmi_phy_configure(struct dw_hdmi
> > *hdmi)
> > HDMI_PHY_I2CM_SLAVE_ADDR);
> >
> > hdmi_phy_test_clear(hdmi, 0);
> >
> > - hdmi_phy_i2c_write(hdmi, mpll_config->res[0].cpce,
> > - HDMI_3D_TX_PHY_CPCE_CTRL);
> > - hdmi_phy_i2c_write(hdmi, mpll_config->res[0].gmp,
> > - HDMI_3D_TX_PHY_GMPCTRL);
> > - hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[0],
> > - HDMI_3D_TX_PHY_CURRCTRL);
> > -
> > - hdmi_phy_i2c_write(hdmi, 0, HDMI_3D_TX_PHY_PLLPHBYCTRL);
> > - hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK,
> > - HDMI_3D_TX_PHY_MSM_CTRL);
> > -
> > - hdmi_phy_i2c_write(hdmi, phy_config->term, HDMI_3D_TX_PHY_TXTERM);
> > - hdmi_phy_i2c_write(hdmi, phy_config->sym_ctr,
> > - HDMI_3D_TX_PHY_CKSYMTXCTRL);
> > - hdmi_phy_i2c_write(hdmi, phy_config->vlev_ctr,
> > - HDMI_3D_TX_PHY_VLEVCTRL);
> > -
> > - /* Override and disable clock termination. */
> > - hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE,
> > - HDMI_3D_TX_PHY_CKCALCTRL);
> > + /* Write to the PHY as configured by the platform */
> > + if (pdata->configure_phy)
> > + ret = pdata->configure_phy(hdmi, pdata, mpixelclock);
> > + else
> > + ret = phy->configure(hdmi, pdata, mpixelclock);
> > + if (ret) {
> > + dev_err(hdmi->dev, "PHY configuration failed (clock %lu)\n",
> > + mpixelclock);
> > + return ret;
> > + }
> >
> > return dw_hdmi_phy_power_on(hdmi);
> > }
> > @@ -1895,24 +1919,31 @@ static const struct dw_hdmi_phy_data
> > dw_hdmi_phys[] = {>
> > .name = "DWC MHL PHY + HEAC PHY",
> > .gen = 2,
> > .has_svsret = true,
> > + .configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
> > }, {
> > .type = DW_HDMI_PHY_DWC_MHL_PHY,
> > .name = "DWC MHL PHY",
> > .gen = 2,
> > .has_svsret = true,
> > + .configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
> > }, {
> > .type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC,
> > .name = "DWC HDMI 3D TX PHY + HEAC PHY",
> > .gen = 2,
> > + .configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
> > }, {
> > .type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY,
> > .name = "DWC HDMI 3D TX PHY",
> > .gen = 2,
> > + .configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
> > }, {
> > .type = DW_HDMI_PHY_DWC_HDMI20_TX_PHY,
> > .name = "DWC HDMI 2.0 TX PHY",
> > .gen = 2,
> > .has_svsret = true,
> > + }, {
> > + .type = DW_HDMI_PHY_VENDOR_PHY,
> > + .name = "Vendor PHY",
> > }
> > };
> >
> > @@ -1943,6 +1974,14 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
> > hdmi->phy.ops = &dw_hdmi_synopsys_phy_ops;
> > hdmi->phy.name = dw_hdmi_phys[i].name;
> > hdmi->phy.data = (void *)&dw_hdmi_phys[i];
> > +
> > + if (!dw_hdmi_phys[i].configure &&
> > + !hdmi->plat_data->configure_phy) {
> > + dev_err(hdmi->dev, "%s requires platform
> > support\n",
> > + hdmi->phy.name);
> > + return -ENODEV;
> > + }
> > +
> > return 0;
> > }
> > }
> > diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> > index 0f583ca7e66e..dd330259a3dc 100644
> > --- a/include/drm/bridge/dw_hdmi.h
> > +++ b/include/drm/bridge/dw_hdmi.h
> > @@ -78,6 +78,9 @@ struct dw_hdmi_plat_data {
> > const struct dw_hdmi_mpll_config *mpll_cfg;
> > const struct dw_hdmi_curr_ctrl *cur_ctr;
> > const struct dw_hdmi_phy_config *phy_config;
> > + int (*configure_phy)(struct dw_hdmi *hdmi,
> > + const struct dw_hdmi_plat_data *pdata,
> > + unsigned long mpixelclock);
> > };
> >
> > int dw_hdmi_probe(struct platform_device *pdev,
> > @@ -91,4 +94,8 @@ void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi,
> > unsigned int rate);
> > void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
> > void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
> >
> > +/* PHY configuration */
> > +void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
> > + unsigned char addr);
> > +
> >
> > #endif /* __IMX_HDMI_H__ */
>
> Hmm, this is kind of confusing. Why do you need a phy_ops and
> then a separate configure_phy function? Can't we just use phy_ops
> always? If its external phy then it would need to implement all
> phy_ops functions.
The phy_ops are indeed meant to support vendor PHYs. The .configure_phy()
operation is meant to support Synopsys PHYs that don't comply with the HDMI TX
MHL and 3D PHYs I2C register layout and thus need a different configure
function, but can share the other operations with the HDMI TX MHL and 3D PHYs.
Ideally I'd like to move that code to the dw-hdmi core, but at the moment I
don't have enough information to decide whether the register layout
corresponds to the standard Synopsys HDMI TX 2.0 PHY or if it has been
modified by the vendor. Once we'll have a second SoC using the same PHY we
should have more information to consolidate the code. Of course, if you can
share the HDMI TX 2.0 PHY datasheet, I won't mind reworking the code now ;-)
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list