[PATCH 00/11] drm/meson: Initial support for HDMI Output
Neil Armstrong
narmstrong at baylibre.com
Thu Mar 2 16:15:47 UTC 2017
On 03/02/2017 04:58 PM, Daniel Vetter wrote:
> On Thu, Mar 02, 2017 at 04:39:56PM +0100, Neil Armstrong wrote:
>> The Amlogic GX SoCs implements a Synopsys DesignWare HDMI TX Controller
>> in combination with a very custom PHY.
>>
>> This patchset depends on Laurent Pinchart v4 patchset at [1] and my v2
>> patchset at [2] to permit PHY control from outside the dw-hdmi driver.
>>
>> The Synopsys DesignWare HDMI TX Controller is integrated like :
>> ___________________________________
>> | HDMI TOP |<= HPD
>> |___________________________________|
>> | | |
>> HDMI-TX-| Synopsys HDMI | HDMI PHY |=> TMDS
>> | Controller |________________|
>> |___________________________________|<=> DDC
>>
>> And uses the following paths for Pixels Encoding :
>> _____ _____ ____________________
>> vd1---| |-| | | VENC /---------|----VDAC
>> vd2---| VIU |-| VPP |-|-----ENCI/-ENCI_DVI-|\
>> osd1--| |-| | | \ | X--HDMI-TX
>> osd2--|_____|-|_____| | |\-ENCP--ENCP_DVI-|/
>> | | |
>> | \--ENCL-----------|----LVDS
>> |____________________|
>>
>> The ENCI and ENCP encoders pre-formats the data for the ENCI-DVI and
>> ENCP-DVI encoders. Those DVI encoders will format the pixels for the
>> Synopsys DesignWare HDMI TX Controller.
>>
>> In order to support display modes, the ENCI and ENCP encoders needs very
>> specific parameters for *each* display modes, so usage of the CEA VIC
>> identifier is necessary. But the DVI timings are generated from the
>> drm_mode structure in a generic way.
>>
>> To simplify the first push, only the main CEA modes are supported up to
>> 1920x1080p60. Supporting the 480i and 576i needs tweaking in the dw-hdmi
>> in order to support the Clock Doubling necessary for these modes.
>>
>> Support for more traditional modes like the EDID fallback modes is planned
>> but will need tome additionnal handling along the CEA modes.
>> Support for 4k2k modes needs to be able to get the EDID HDMI modes, but
>> for now only the HDMI 1.4 modes are currently available in the drm_edid
>> implementation.
>
> Btw, with the neat ascii-art stuff here and in comments in your code, did
> you look into assembling all that into a meson driver documentation
> chapter like the one for vc4 that was just merged?
> -Daniel
Hi Daniel,
Yes, I was thinking about that, but was focused to have all the bits working and
in an upstream-able form.
I will certainly push one in the next few days since I already have a lot of text
ready in the comments.
Neil
>
>>
>> This patchset does :
>> - Fixes the CRTC handling
>> - Fixes the registers definitions
>> - Adds support for device components registration along of-graph
>> - Adds support for HDMI clocks
>> - Adds support for HDMI VENC video modes
>> - Adds support for the Custom HDMI PHY using callbacks added in [1] and [2]
>> - Adds CMA node to reserve enougth memory for 1080p display
>> - Adds the HDMI controller et connector modes on selected boards
>> - Adds a proper dt-bindings for the HDMI controller et connector
>> - Updates the MAINTAINERS file to track the new files
>>
>> [1] http://lkml.kernel.org/r/20170301223915.29888-1-laurent.pinchart+renesas@ideasonboard.com
>> [2] http://lkml.kernel.org/r/1488468572-31971-1-git-send-email-narmstrong@baylibre.com
>>
>> Neil Armstrong (11):
>> drm/meson: Use crtc_state for hdisplay and fix atomic flush/enable
>> sync for vsync commit
>> drm/meson: Add missing HDMI register
>> drm/meson: Add support for components
>> drm/meson: venc_cvbs: no more return -ENODEV if CVBS is not available
>> drm/meson: add support for HDMI clock support
>> drm/meson: Add support for HDMI venc modes and settings
>> drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY
>> ARM64: dts: meson-gx: Add shared CMA dma memory pool
>> ARM64: dts: meson-gx: Add support for HDMI output
>> dt-bindings: Add bindings for the Amlogic Meson dw-hdmi extension
>> MAINTAINERS: update files for Amlogic DRM Driver
>>
>> .../bindings/display/amlogic,meson-dw-hdmi.txt | 111 ++
>> MAINTAINERS | 1 +
>> .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 39 +
>> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 40 +
>> .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 23 +
>> arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 23 +
>> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 12 +
>> .../boot/dts/amlogic/meson-gxl-nexbox-a95x.dts | 23 +
>> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 13 +
>> .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 23 +
>> arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 4 +
>> drivers/gpu/drm/meson/Kconfig | 6 +
>> drivers/gpu/drm/meson/Makefile | 1 +
>> drivers/gpu/drm/meson/meson_crtc.c | 15 +-
>> drivers/gpu/drm/meson/meson_drv.c | 113 +-
>> drivers/gpu/drm/meson/meson_drv.h | 3 +
>> drivers/gpu/drm/meson/meson_dw_hdmi.c | 918 +++++++++++++++
>> drivers/gpu/drm/meson/meson_dw_hdmi.h | 146 +++
>> drivers/gpu/drm/meson/meson_registers.h | 1 +
>> drivers/gpu/drm/meson/meson_vclk.c | 624 +++++++++-
>> drivers/gpu/drm/meson/meson_vclk.h | 6 +-
>> drivers/gpu/drm/meson/meson_venc.c | 1245 +++++++++++++++++++-
>> drivers/gpu/drm/meson/meson_venc.h | 7 +
>> drivers/gpu/drm/meson/meson_venc_cvbs.c | 11 +-
>> drivers/gpu/drm/meson/meson_vpp.h | 2 +
>> 25 files changed, 3370 insertions(+), 40 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
>> create mode 100644 drivers/gpu/drm/meson/meson_dw_hdmi.c
>> create mode 100644 drivers/gpu/drm/meson/meson_dw_hdmi.h
>>
>> --
>> 1.9.1
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
More information about the dri-devel
mailing list