[PATCH v5 07/10] drm: bridge: dw-hdmi: Add support for custom PHY configuration

Laurent Pinchart laurent.pinchart+renesas at ideasonboard.com
Fri Mar 3 17:20:04 UTC 2017


From: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>

The DWC HDMI TX controller interfaces with a companion PHY. While
Synopsys provides multiple standard PHYs, SoC vendors can also integrate
a custom PHY.

Modularize PHY configuration to support vendor PHYs through platform
data. The existing PHY configuration code was originally written to
support the DWC HDMI 3D TX PHY, and seems to be compatible with the DWC
MLP PHY. The HDMI 2.0 PHY will require a separate configuration
function.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong at baylibre.com>
Reviewed-by: Jose Abreu <Jose.Abreu at synopsys.com>
---
Changes since v1:

- Check pdata->phy_configure in hdmi_phy_configure() to avoid
  dereferencing NULL pointer.
---
 drivers/gpu/drm/bridge/dw-hdmi.c | 109 ++++++++++++++++++++++++++-------------
 include/drm/bridge/dw_hdmi.h     |   7 +++
 2 files changed, 81 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
index cb2703862be2..b835d81bb471 100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -118,6 +118,9 @@ struct dw_hdmi_phy_data {
 	const char *name;
 	unsigned int gen;
 	bool has_svsret;
+	int (*configure)(struct dw_hdmi *hdmi,
+			 const struct dw_hdmi_plat_data *pdata,
+			 unsigned long mpixelclock);
 };
 
 struct dw_hdmi {
@@ -860,8 +863,8 @@ static bool hdmi_phy_wait_i2c_done(struct dw_hdmi *hdmi, int msec)
 	return true;
 }
 
-static void hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
-				 unsigned char addr)
+void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
+			   unsigned char addr)
 {
 	hdmi_writeb(hdmi, 0xFF, HDMI_IH_I2CMPHY_STAT0);
 	hdmi_writeb(hdmi, addr, HDMI_PHY_I2CM_ADDRESS_ADDR);
@@ -873,6 +876,7 @@ static void hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
 		    HDMI_PHY_I2CM_OPERATION_ADDR);
 	hdmi_phy_wait_i2c_done(hdmi, 1000);
 }
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write);
 
 static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool enable)
 {
@@ -993,37 +997,67 @@ static int dw_hdmi_phy_power_on(struct dw_hdmi *hdmi)
 	return 0;
 }
 
-static int hdmi_phy_configure(struct dw_hdmi *hdmi)
+/*
+ * PHY configuration function for the DWC HDMI 3D TX PHY. Based on the available
+ * information the DWC MHL PHY has the same register layout and is thus also
+ * supported by this function.
+ */
+static int hdmi_phy_configure_dwc_hdmi_3d_tx(struct dw_hdmi *hdmi,
+		const struct dw_hdmi_plat_data *pdata,
+		unsigned long mpixelclock)
 {
-	const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
-	const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
 	const struct dw_hdmi_mpll_config *mpll_config = pdata->mpll_cfg;
 	const struct dw_hdmi_curr_ctrl *curr_ctrl = pdata->cur_ctr;
 	const struct dw_hdmi_phy_config *phy_config = pdata->phy_config;
 
 	/* PLL/MPLL Cfg - always match on final entry */
 	for (; mpll_config->mpixelclock != ~0UL; mpll_config++)
-		if (hdmi->hdmi_data.video_mode.mpixelclock <=
-		    mpll_config->mpixelclock)
+		if (mpixelclock <= mpll_config->mpixelclock)
 			break;
 
 	for (; curr_ctrl->mpixelclock != ~0UL; curr_ctrl++)
-		if (hdmi->hdmi_data.video_mode.mpixelclock <=
-		    curr_ctrl->mpixelclock)
+		if (mpixelclock <= curr_ctrl->mpixelclock)
 			break;
 
 	for (; phy_config->mpixelclock != ~0UL; phy_config++)
-		if (hdmi->hdmi_data.video_mode.mpixelclock <=
-		    phy_config->mpixelclock)
+		if (mpixelclock <= phy_config->mpixelclock)
 			break;
 
 	if (mpll_config->mpixelclock == ~0UL ||
 	    curr_ctrl->mpixelclock == ~0UL ||
-	    phy_config->mpixelclock == ~0UL) {
-		dev_err(hdmi->dev, "Pixel clock %d - unsupported by HDMI\n",
-			hdmi->hdmi_data.video_mode.mpixelclock);
+	    phy_config->mpixelclock == ~0UL)
 		return -EINVAL;
-	}
+
+	dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].cpce,
+			      HDMI_3D_TX_PHY_CPCE_CTRL);
+	dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].gmp,
+			      HDMI_3D_TX_PHY_GMPCTRL);
+	dw_hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[0],
+			      HDMI_3D_TX_PHY_CURRCTRL);
+
+	dw_hdmi_phy_i2c_write(hdmi, 0, HDMI_3D_TX_PHY_PLLPHBYCTRL);
+	dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK,
+			      HDMI_3D_TX_PHY_MSM_CTRL);
+
+	dw_hdmi_phy_i2c_write(hdmi, phy_config->term, HDMI_3D_TX_PHY_TXTERM);
+	dw_hdmi_phy_i2c_write(hdmi, phy_config->sym_ctr,
+			      HDMI_3D_TX_PHY_CKSYMTXCTRL);
+	dw_hdmi_phy_i2c_write(hdmi, phy_config->vlev_ctr,
+			      HDMI_3D_TX_PHY_VLEVCTRL);
+
+	/* Override and disable clock termination. */
+	dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE,
+			      HDMI_3D_TX_PHY_CKCALCTRL);
+
+	return 0;
+}
+
+static int hdmi_phy_configure(struct dw_hdmi *hdmi)
+{
+	const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
+	const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
+	unsigned long mpixelclock = hdmi->hdmi_data.video_mode.mpixelclock;
+	int ret;
 
 	dw_hdmi_phy_power_off(hdmi);
 
@@ -1042,26 +1076,16 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
 		    HDMI_PHY_I2CM_SLAVE_ADDR);
 	hdmi_phy_test_clear(hdmi, 0);
 
-	hdmi_phy_i2c_write(hdmi, mpll_config->res[0].cpce,
-			   HDMI_3D_TX_PHY_CPCE_CTRL);
-	hdmi_phy_i2c_write(hdmi, mpll_config->res[0].gmp,
-			   HDMI_3D_TX_PHY_GMPCTRL);
-	hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[0],
-			   HDMI_3D_TX_PHY_CURRCTRL);
-
-	hdmi_phy_i2c_write(hdmi, 0, HDMI_3D_TX_PHY_PLLPHBYCTRL);
-	hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK,
-			   HDMI_3D_TX_PHY_MSM_CTRL);
-
-	hdmi_phy_i2c_write(hdmi, phy_config->term, HDMI_3D_TX_PHY_TXTERM);
-	hdmi_phy_i2c_write(hdmi, phy_config->sym_ctr,
-			   HDMI_3D_TX_PHY_CKSYMTXCTRL);
-	hdmi_phy_i2c_write(hdmi, phy_config->vlev_ctr,
-			   HDMI_3D_TX_PHY_VLEVCTRL);
-
-	/* Override and disable clock termination. */
-	hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE,
-			   HDMI_3D_TX_PHY_CKCALCTRL);
+	/* Write to the PHY as configured by the platform */
+	if (pdata->configure_phy)
+		ret = pdata->configure_phy(hdmi, pdata, mpixelclock);
+	else
+		ret = phy->configure(hdmi, pdata, mpixelclock);
+	if (ret) {
+		dev_err(hdmi->dev, "PHY configuration failed (clock %lu)\n",
+			mpixelclock);
+		return ret;
+	}
 
 	return dw_hdmi_phy_power_on(hdmi);
 }
@@ -1895,24 +1919,31 @@ static const struct dw_hdmi_phy_data dw_hdmi_phys[] = {
 		.name = "DWC MHL PHY + HEAC PHY",
 		.gen = 2,
 		.has_svsret = true,
+		.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
 	}, {
 		.type = DW_HDMI_PHY_DWC_MHL_PHY,
 		.name = "DWC MHL PHY",
 		.gen = 2,
 		.has_svsret = true,
+		.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
 	}, {
 		.type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC,
 		.name = "DWC HDMI 3D TX PHY + HEAC PHY",
 		.gen = 2,
+		.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
 	}, {
 		.type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY,
 		.name = "DWC HDMI 3D TX PHY",
 		.gen = 2,
+		.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
 	}, {
 		.type = DW_HDMI_PHY_DWC_HDMI20_TX_PHY,
 		.name = "DWC HDMI 2.0 TX PHY",
 		.gen = 2,
 		.has_svsret = true,
+	}, {
+		.type = DW_HDMI_PHY_VENDOR_PHY,
+		.name = "Vendor PHY",
 	}
 };
 
@@ -1943,6 +1974,14 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 			hdmi->phy.ops = &dw_hdmi_synopsys_phy_ops;
 			hdmi->phy.name = dw_hdmi_phys[i].name;
 			hdmi->phy.data = (void *)&dw_hdmi_phys[i];
+
+			if (!dw_hdmi_phys[i].configure &&
+			    !hdmi->plat_data->configure_phy) {
+				dev_err(hdmi->dev, "%s requires platform support\n",
+					hdmi->phy.name);
+				return -ENODEV;
+			}
+
 			return 0;
 		}
 	}
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index 0f583ca7e66e..dd330259a3dc 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -78,6 +78,9 @@ struct dw_hdmi_plat_data {
 	const struct dw_hdmi_mpll_config *mpll_cfg;
 	const struct dw_hdmi_curr_ctrl *cur_ctr;
 	const struct dw_hdmi_phy_config *phy_config;
+	int (*configure_phy)(struct dw_hdmi *hdmi,
+			     const struct dw_hdmi_plat_data *pdata,
+			     unsigned long mpixelclock);
 };
 
 int dw_hdmi_probe(struct platform_device *pdev,
@@ -91,4 +94,8 @@ void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
 void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
 void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
 
+/* PHY configuration */
+void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
+			   unsigned char addr);
+
 #endif /* __IMX_HDMI_H__ */
-- 
Regards,

Laurent Pinchart



More information about the dri-devel mailing list