[PATCH v3 3/3] drm: rcar-du: Register a completion callback with VSP1
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Sun Mar 5 22:01:13 UTC 2017
Hi Kieran,
Thank you for the patch.
On Sunday 05 Mar 2017 16:00:04 Kieran Bingham wrote:
> Currently we process page flip events on every display interrupt,
> however this does not take into consideration the processing time needed
> by the VSP1 utilised in the pipeline.
>
> Register a callback with the VSP driver to obtain completion events, and
> track them so that we only perform page flips when the full display
> pipeline has completed for the frame.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
> ---
> drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 8 ++++++--
> drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 1 +
> drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 9 +++++++++
> 3 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 2aceb84fc15d..caaaa1812e20
> 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -299,7 +299,7 @@ static void rcar_du_crtc_update_planes(struct
> rcar_du_crtc *rcrtc) * Page Flip
> */
>
> -static void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc)
> +void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc)
> {
> struct drm_pending_vblank_event *event;
> struct drm_device *dev = rcrtc->crtc.dev;
> @@ -571,6 +571,7 @@ static const struct drm_crtc_funcs crtc_funcs = {
> static irqreturn_t rcar_du_crtc_irq(int irq, void *arg)
> {
> struct rcar_du_crtc *rcrtc = arg;
> + struct rcar_du_device *rcdu = rcrtc->group->dev;
> irqreturn_t ret = IRQ_NONE;
> u32 status;
>
> @@ -579,7 +580,10 @@ static irqreturn_t rcar_du_crtc_irq(int irq, void *arg)
>
> if (status & DSSR_FRM) {
> drm_crtc_handle_vblank(&rcrtc->crtc);
> - rcar_du_crtc_finish_page_flip(rcrtc);
> +
> + if (rcdu->info->gen < 3)
> + rcar_du_crtc_finish_page_flip(rcrtc);
> +
> ret = IRQ_HANDLED;
> }
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h index a7194812997e..ebdbff9d8e59
> 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> @@ -71,5 +71,6 @@ void rcar_du_crtc_resume(struct rcar_du_crtc *rcrtc);
>
> void rcar_du_crtc_route_output(struct drm_crtc *crtc,
> enum rcar_du_output output);
> +void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc);
>
> #endif /* __RCAR_DU_CRTC_H__ */
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c index b0ff304ce3dc..cbb6f54c99ef
> 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> @@ -28,6 +28,13 @@
> #include "rcar_du_kms.h"
> #include "rcar_du_vsp.h"
>
> +static void rcar_du_vsp_complete(void *private)
> +{
> + struct rcar_du_crtc *crtc = (struct rcar_du_crtc *)private;
I'll remove the cast when applying, as pointed out by Sergei.
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> +
> + rcar_du_crtc_finish_page_flip(crtc);
> +}
> +
> void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
> {
> const struct drm_display_mode *mode = &crtc->crtc.state-
>adjusted_mode;
> @@ -35,6 +42,8 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
> struct vsp1_du_lif_config cfg = {
> .width = mode->hdisplay,
> .height = mode->vdisplay,
> + .callback = rcar_du_vsp_complete,
> + .callback_data = crtc,
> };
> struct rcar_du_plane_state state = {
> .state = {
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list