[PATCH v5.1 05/10] drm: bridge: dw-hdmi: Fix the PHY power up sequence

[Laurent Pinchart]

When powering the PHY up we need to wait for the PLL to lock. This is
done by polling the TX_PHY_LOCK bit in the HDMI_PHY_STAT0 register
(interrupt-based wait could be implemented as well but is likely
overkill). The bit is asserted when the PLL locks, but the current code
incorrectly waits for the bit to be deasserted. Fix it, and while at it,
replace the udelay() with a sleep as the code never runs in
non-sleepable context.

To be consistent with the power down implementation move the poll loop
to the power off function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong at baylibre.com>
Reviewed-by: Jose Abreu <joabreu at synopsys.com>
---
 drivers/gpu/drm/bridge/dw-hdmi.c | 65 +++++++++++++++++++++++-----------------
 1 file changed, 37 insertions(+), 28 deletions(-)

Changes since v5:

- Fix compilation breakage due to reordering of the patches compared to v4

diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
index 3a1cd4c7ac64..c25eac8ba47b 100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -949,9 +949,44 @@ static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
 	dw_hdmi_phy_gen2_pddq(hdmi, 1);
 }
 
+static int dw_hdmi_phy_power_on(struct dw_hdmi *hdmi)
+{
+	const struct dw_hdmi_phy_data *phy = hdmi->phy;
+	unsigned int i;
+	u8 val;
+
+	if (phy->gen == 1) {
+		dw_hdmi_phy_enable_powerdown(hdmi, false);
+
+		/* Toggle TMDS enable. */
+		dw_hdmi_phy_enable_tmds(hdmi, 0);
+		dw_hdmi_phy_enable_tmds(hdmi, 1);
+		return 0;
+	}
+
+	dw_hdmi_phy_gen2_txpwron(hdmi, 1);
+	dw_hdmi_phy_gen2_pddq(hdmi, 0);
+
+	/* Wait for PHY PLL lock */
+	for (i = 0; i < 5; ++i) {
+		val = hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_TX_PHY_LOCK;
+		if (val)
+			break;
+
+		usleep_range(1000, 2000);
+	}
+
+	if (!val) {
+		dev_err(hdmi->dev, "PHY PLL failed to lock\n");
+		return -ETIMEDOUT;
+	}
+
+	dev_dbg(hdmi->dev, "PHY PLL locked %u iterations\n", i);
+	return 0;
+}
+
 static int hdmi_phy_configure(struct dw_hdmi *hdmi)
 {
-	u8 val, msec;
 	const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
 	const struct dw_hdmi_mpll_config *mpll_config = pdata->mpll_cfg;
 	const struct dw_hdmi_curr_ctrl *curr_ctrl = pdata->cur_ctr;
@@ -1019,33 +1054,7 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
 	hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE,
 			   HDMI_3D_TX_PHY_CKCALCTRL);
 
-	dw_hdmi_phy_enable_powerdown(hdmi, false);
-
-	/* toggle TMDS enable */
-	dw_hdmi_phy_enable_tmds(hdmi, 0);
-	dw_hdmi_phy_enable_tmds(hdmi, 1);
-
-	/* gen2 tx power on */
-	dw_hdmi_phy_gen2_txpwron(hdmi, 1);
-	dw_hdmi_phy_gen2_pddq(hdmi, 0);
-
-	/* Wait for PHY PLL lock */
-	msec = 5;
-	do {
-		val = hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_TX_PHY_LOCK;
-		if (!val)
-			break;
-
-		if (msec == 0) {
-			dev_err(hdmi->dev, "PHY PLL not locked\n");
-			return -ETIMEDOUT;
-		}
-
-		udelay(1000);
-		msec--;
-	} while (1);
-
-	return 0;
+	return dw_hdmi_phy_power_on(hdmi);
 }
 
 static int dw_hdmi_phy_init(struct dw_hdmi *hdmi)
-- 
Regards,

Laurent Pinchart